TTE IS38RACE IHI UPGRADE TURBOCHARGER -TTE10354

SKU: TTE10354
In Stock

د.إ7,900.00

Upon placing the order, we will get in touch with you to confirm the availability information.

For Instant Enquiry and More Details, Please Click Here

In Stock
Add to Wishlist
Add to Wishlist

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist
Low Prices

Price match guarantee

Guaranteed Fitment.

Always the correct part

In-House Experts.

We know our products

Wide Product Selection

Endless Possibilities

Category:

Description

TTE IS38Race IHI Turbocharger

 

Many of our customers have been asking for a motorsport IS38 turbocharger, Well here it is!

TTE IS38Race Turbocharger is based on the Original Genuine IHI IS38 turbocharger for the EA888.3 2.0TSI VAG Engine, not a cheap aftermarket clone IS38 turbo that are available from others and not disclosed.

A TTE IS38Race has a TTE upgrade performance bearing pack and motorsport balanced TTE core using the IHI Bearing housing and IHI IS38 turbine and Genuine IHI IS38 compressor wheel giving a reliable performance at higher boost levels as used on Stage 1 & 2 software calibrations from all software providers.  We also include our TTE CNC silencer delete, removing the original baffle internals and fitting a new billet straight through section to improve the flow and enhance the sound.

This is a direct swap from a standard IS38 so no remap or special calibration required vs standard is38 software.  

Precisely balancing the IS38Race turbocharger is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts balance machine, then components are assembled and then the CHRA is dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. A balance report document is supplied with your TTE IS38Race for your reassurance.

 

 

Product Highlights:

  • Original IS38 Genuine IHI turbocharger as the base part
  • Original Genuine actuator (TTE calibrated)
  • Original Genuine diverter valve
  • Original Genuine IHI Boost silencer
  • Original Genuine IHI IS38 compressor
  • Original Genuine IHI IS38 turbine
  • TTE Upgrade Reinforced bearing pack
  • TTE Silencer delete 
  • Plug and Play installation as IS38 turbocharger
  • Single parts finely balanced then components assembled and core high-speed VSR balanced
  • Supplied with a balance test result document
  • Perfect choice for stock software or all IS38 2.0 TSI ECU stage 1 or 2 & 2+ calibrations (APR, BEVO, DVX, JDE, UNITRONIC, MRC, REVO, REVLIMIT, ETUNER, & Many More)
  • Proven TheTurboEngineers quality
  • Made in Germany

IF SENDING A TURBOCHARGER BE SURE TO CHECK IS AN OEM GENUINE IHI IS38

Please check out our TTE HEAT SHIELD ISOLATION ADD-ON option that’s available.  

iso

Additional information

Brand

The Turbo Engineer

Make

Audi, Golf R, S3, Volkswagen

Model Year

2015, 2016, 2017, 2018, 2019, 2020

Reviews

There are no reviews yet.

Be the first to review “TTE IS38RACE IHI UPGRADE TURBOCHARGER -TTE10354”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsTTE IS38RACE IHI UPGRADE TURBOCHARGER -TTE10354 removeCTS TURBO MQB TURBO INLET HOSE – VW GOLF/GTI/GOLF R AND AUDI A3/S3 (2015+) -CTS-SIL-0070 removeRACINGLINE TURBO MUFFLER DELETE FOR 2.0 TSI GOLF R, GTI, AUDI S3, TT for EA888.3 - VWR16 G7DEL removeCTS TURBO 8V.2 RS3/ 8S TTRS 2.5T EVO TURBO OUTLET PIPE -CTS-IT-259 removeCTS TURBO 1.8T/2.0T MQB GEN3 HIGH-FLOW TURBO INLET PIPE -CTS-IT-285 removeCTS TURBO AUDI/VW 7-SPEED DSG/S-TRONIC DQ381 TURBO OUTLET PIPE (MK7.5, 8V.2, 8S.2) -CTS-IT-277 remove
NameTTE IS38RACE IHI UPGRADE TURBOCHARGER -TTE10354 removeCTS TURBO MQB TURBO INLET HOSE – VW GOLF/GTI/GOLF R AND AUDI A3/S3 (2015+) -CTS-SIL-0070 removeRACINGLINE TURBO MUFFLER DELETE FOR 2.0 TSI GOLF R, GTI, AUDI S3, TT for EA888.3 - VWR16 G7DEL removeCTS TURBO 8V.2 RS3/ 8S TTRS 2.5T EVO TURBO OUTLET PIPE -CTS-IT-259 removeCTS TURBO 1.8T/2.0T MQB GEN3 HIGH-FLOW TURBO INLET PIPE -CTS-IT-285 removeCTS TURBO AUDI/VW 7-SPEED DSG/S-TRONIC DQ381 TURBO OUTLET PIPE (MK7.5, 8V.2, 8S.2) -CTS-IT-277 remove
Image
SKUTTE10354CTS-SIL-0070VWR16G7TDELCTS-IT-259CTS-IT-285CTS-IT-277
Rating
Priceد.إ7,900.00د.إ400.00د.إ500.00د.إ880.00د.إ600.00د.إ950.00
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

DescriptionUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereThis product will be in stock and available for purchase.  Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here
ContentTTE IS38Race IHI Turbocharger   Many of our customers have been asking for a motorsport IS38 turbocharger, Well here it is! TTE IS38Race Turbocharger is based on the Original Genuine IHI IS38 turbocharger for the EA888.3 2.0TSI VAG Engine, not a cheap aftermarket clone IS38 turbo that are available from others and not disclosed. A TTE IS38Race has a TTE upgrade performance bearing pack and motorsport balanced TTE core using the IHI Bearing housing and IHI IS38 turbine and Genuine IHI IS38 compressor wheel giving a reliable performance at higher boost levels as used on Stage 1 & 2 software calibrations from all software providers.  We also include our TTE CNC silencer delete, removing the original baffle internals and fitting a new billet straight through section to improve the flow and enhance the sound. This is a direct swap from a standard IS38 so no remap or special calibration required vs standard is38 software.   Precisely balancing the IS38Race turbocharger is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts balance machine, then components are assembled and then the CHRA is dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. A balance report document is supplied with your TTE IS38Race for your reassurance.     Product Highlights:
  • Original IS38 Genuine IHI turbocharger as the base part
  • Original Genuine actuator (TTE calibrated)
  • Original Genuine diverter valve
  • Original Genuine IHI Boost silencer
  • Original Genuine IHI IS38 compressor
  • Original Genuine IHI IS38 turbine
  • TTE Upgrade Reinforced bearing pack
  • TTE Silencer delete 
  • Plug and Play installation as IS38 turbocharger
  • Single parts finely balanced then components assembled and core high-speed VSR balanced
  • Supplied with a balance test result document
  • Perfect choice for stock software or all IS38 2.0 TSI ECU stage 1 or 2 & 2+ calibrations (APR, BEVO, DVX, JDE, UNITRONIC, MRC, REVO, REVLIMIT, ETUNER, & Many More)
  • Proven TheTurboEngineers quality
  • Made in Germany
IF SENDING A TURBOCHARGER BE SURE TO CHECK IS AN OEM GENUINE IHI IS38 Please check out our TTE HEAT SHIELD ISOLATION ADD-ON option that’s available.   iso
CTS Turbo is proud to offer our upgraded turbo inlet hose for the MK7+ VW and 8V Audi MQB vehicles.  The factory turbo inlet hose is corrugated with internal ridges that disrupt air flow.  Not only do they reduce air flow, but the plastic can become weak over time causing leaks and reduced performance. The CTS Turbo turbo inlet hose is constructed from 5-ply silicone that will not collapse, even under heavy load. This is MUCH stronger than other inlet hoses offered by different companies. Collapsing intake hose can cause turbo to fail!! The CTS Turbo inlet hose allows for smooth uninterrupted flow and more air pumping through your engine! Features:
  • Designed to fit factory airbox and any turbo inlet pipe
  • 5-ply silicone construction
  • Smooth internal construction for good airflow
  • High strength hose clamps
Components: 1 x CTS Turbo MQB Turbo Inlet Hose 2 x Hose clamps Fits the following vehicles:
  • 2015+ VW Golf
  • 2015+ VW GTI
  • 2019+ VW Jetta GLI
  • 2015+ VW Golf R
  • 2015+ Audi A3
  • 2015+ Audi S3
Note: does not fit vehicles with MAF sensor on the intake.
Make Model Year Generation
AUDI A3 2015 - 2020 8V
AUDI S3 2015 - 2020 8V
VW GOLF R 2015 - 2020 MK7/7.5
VW GOLF R 2021
VW GTI 2015 - 2020 MK7/7.5
VW GTI 2021 MK8
VW JETTA GLI 2019 - 2021 MK7
TURBO MUFFLER DELETE For VWG 2.0 TSI EA888 gen.3
A smooth, turbulence-free air path exiting your turbo with the RacingLine 2.0 TSI Turbo Muffler Delete.
For MQB-platform car using the 1.8T and 2.0T EA888 TSI Engines with the IHI IS20 or IS38 turbo.
WHAT THE TURBO MUFFLER DELETE DOES.

Our Turbo Muffler Delete is a sleek single billet design which replaces the restrictive, power-robbing compressor outlet with a smooth, turbulence free air path exiting the turbo.

  • The standard part is located on the outlet of the turbo compressor and is simply designed to reduce engine bay acoustics.
  • Whilst it subdues the harmonic noises generated by the turbo, it also adds in disruptive turbulence to the airflow right where you don't want it.  
  • By replacing the standard part with our maximum diameter Turbo Muffler Delete, you’ll replace this unwanted restriction with a smooth CFD-developed uninterrupted air path
  • The result: noticeably better boost response giving a little more power and throttle reaction, all the while being able to actually hear your turbo working.
CONFIRMED APPLICATIONS
>
VW Golf 7 & 7.5 GTI & Clubsport
2013-2020
>
VW Golf 7 & 7.5 R
2013-2020
>
VW Golf 7 & 7.5 1.8 TSI
2013-2020
>
VW Passat 2.0 TSI B8
2015+
>
VW Arteon 2.0 TSI
2017+
>
VW T-Roc R 2.0 TSI
2019+
>
VW Tiguan II 2.0 TSI
2016+
>
VW Jetta / GLI 7
2018+
>
Audi S1 2.0 TFSI
2015-2018
>
Audi S3 8V
2013-2020
>
Audi A3 2.0 TSI / 1.8 TSI 8V
2013-2020
>
Audi TT 2.0 TSI 8S
2014+
>
Audi TTS 2.0 TSI 8S
2015+
>
Audi SQ2
2018+
>
Audi Q3 45 TFSI 2.0 TSI
2018+
The CTS Turbo 8V.2 RS3/8S TTRS 2.5T EVO Turbo Outlet Pipe (TOP) is designed to replace the stock cast ‘pancake’ pipe that comes as factory equipment on your vehicle.  Our Turbo Outlet Pipe features 2.50″ diameter CNC bent aluminum tube for optimized flow.  If you’re looking for a simple bolt-on modification that will optimize flow, then this part is for you.
Product Details:
– For 8V.2 RS3/ 8S TTRS 2.5T EVO
– 2.5″ flow-optimized CNC bent aluminum pipe
– Robust black powder coating
– CNC machined mounting flange
– Coveted CTS Turbo logo
Make Model Year Generation
AUDI RS3 2015 - 2018 8V
AUDI TTRS 2016 - 2021 8S
CTS Turbo is proud to announce our High Flow Turbo Inlet.  We were the first manufacturer to offer these; and now they are made from cast aluminum! This part is compatible with any MQB vehicle, regardless of engine displacement or factory turbocharger size. It is compatible with any intake system, be it factory stock or aftermarket. Simple installation takes 10 minutes and can be done using basic hand tools. Don’t let your free-flowing intake taper into a small restrictive factory inlet. Upgrade to CTS Turbo High Flow Turbo Inlet and make sure you get the most airflow to your turbo! Product features:
  • Large inside diameter for extremely high flow
  • Cast aluminum with CNC machined flanges
  • Compatible with any intake system, including stock
  • Durable aluminum construction, will not break like factory plastic part
  • Simple installation
  • Includes new o-ring
  • Faster turbo spool, more airflow, improved turbo sound!
Fitment is for MK7, MK7.5 and 8V, 8V.2 cars (ROW vehicles may have different years):
  • 2015-2020 Audi A3/S3/TT/TT-S  (including facelift models)
  • 2018+ Audi SQ2
  • 2015-2020 VW Golf, Sportwagen, Alltrack, GTI, Golf R, GTI Clubsport, GTI Rabbit Edition,  ED40 (including facelift models)
  • 2019+ VW Jetta GLI 2.0T
  • 2018+ VW Tiguan
  • 2018-2020 VW Arteon
  • 2018+ Atlas 2.0T
  • Skoda Octavia, Octavia VRS (MK3)
  • Seat Leon, Cupra (MK3)
  • Skoda Superb (B8)
Make Model Year Generation
AUDI A3 2015 - 2020 8V
AUDI S3 2015 - 2020 8V
AUDI TT 2016 - 2020 8S
VW ARTEON 2017 - 2019 MK1
VW ATLAS 2018 - 2019 MK1
VW GOLF 2015 - 2020 MK7/7.5
VW GOLF R 2015 - 2020 MK7/7.5
VW GTI 2015 - 2020 MK7/7.5
VW JETTA GLI 2019 - 2021 MK7
VW TIGUAN 2018 - 2020 MK2
CTS Turbo is pleased to release our high flow turbo outlet pipe for 7-speed DSG MQB vehicles such a MK7.5 VW Golf R and 8V.2 Audi S3 and 8S Audi TT-S.  The factory turbo outlet pipe is constructed from flimsy plastic and is quite narrow, which results in an extreme airflow restriction. The CTS Turbo high flow turbo outlet pipe kit is constructed from mandrel-bent 60mm aluminum tubing. A custom 5-ply silicon coupler makes installation simple! The CTS Turbo high flow turbo outlet pipe kit also replaces all the factory charge piping between the turbocharger compressor housing and factory intercooler. Product Details:
  • 60mm aluminum piping with CTS logo
  • 5-ply silicon coupler
  • Factory mounting points are used for perfect fitment
  • Durable black powdercoat finish
  • For 7-speed DSG/S-tronic transmissions only
  • Compatible with factory and upgraded turbos
  • Compatible with factory and upgraded intakes
  • Compatible with factory and upgraded intercoolers
Parts Included:
  • Upper turbo outlet silicon
  • Lower turbo outlet pipe
  • 2 clamps
  • Installation hardware
Fitment:
  • 2018+ VW Golf R DSG 7-speed
  • 2018+ Audi S3 S-Tronic 7-speed
  • 2018+ Audi TT-S S-Tronic 7-speed
Compatible with vehicles without SAI only.
Make Model Year Generation
AUDI S3 2017 - 2020 8V
AUDI TTS 2018 - 2021 8S
VW GOLF R 2018 - 2020 MK7/7.5
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Brand

The Turbo Engineer

Make

Audi, Golf R, S3, Volkswagen

Model Year

2015, 2016, 2017, 2018, 2019, 2020

Brand

CTS Turbo

Make

A3, Audi, Golf GTI, Golf R, S3, Volkswagen

Model Year

2015, 2016, 2017, 2018, 2019, 2020, 2021

Brand

Racingline

Make

A3, Audi, Golf GTI, Golf R, Q3, S3, SQ2, TT, TTS, Volkswagen

Model Year

2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020

Brand

CTS Turbo

Make

Audi, RS3, TTRS

Model Year

2015, 2016, 2017, 2018, 2019, 2020, 2021

Brand

CTS Turbo

Make

A3, Audi, Golf GTI, Golf R, S3, TT, Volkswagen

Model Year

2015, 2016, 2017, 2018, 2019, 2020, 2021

Brand

CTS Turbo

Make

Audi, Golf R, S3, TTS, Volkswagen

Model Year

2017, 2018, 2019, 2020, 2021