Brand	Forge Motorsport
Make	Audi, RS3
Model Year	2015, 2016, 2017, 2018, 2019, 2020

Forge Motorsport Audi RS3 8V Intercooler (2015-) – FMINT4

Name: Forge Motorsport Audi RS3 8V Intercooler (2015-) - FMINT4 - VagLogic Auto Service Center
SKU: FMINT4
Price: 6380.00 AED
Availability: InStock

SKU: FMINT4

In Stock

د.إ6,380.00

Upon placing the order, we will get in touch with you to confirm the availability information.

For Instant Enquiry and More Details, Please Click Here

In Stock

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist

Low Prices

Price match guarantee

Guaranteed Fitment.

Always the correct part

In-House Experts.

We know our products

Wide Product Selection

Endless Possibilities

Category: Cooling Systems

Description

The RS3 8V core is a huge 640x250x100 and of bar and plate design. This gives it a huge 55% more surface area than stock, and an even more impressive 94% more volume. The end tanks are made with integrated pipes in order to retain the stock boost hoses, though you can also replace the hoses with our FMKT024 boost hose set if you so wish. Just like on the 8P chassis, we supply a genuine Audi RS3 crash bar which we modify in house in order to accept the new larger core, then finish both the crash bar and core in our standard black crackle finish powder coat for maximum longevity.

As shown in the graph below, for both tests we let the car heatsoak on the dyno until the radiator fans tripped on and off (which gives an inlet temperature of 36°C), then do a dyno pull from there. This gives a more consistent result and reflects real-world driving conditions more accurately. You can easily see the Forge intercooler cools much quicker and delivers a much greater drop in temperature compared to OEM.

The kit contains full instructions for installation, which should take around 3.5 hours, and a complete kit which includes everything needed.

If your car is fitted with adaptive cruise control, we can additionally supply you with a billet bracket and fixings to enable the relocation of the ACC radar. Simply select the ACC option in the drop down menu above. No re-coding of the unit should be necessary.

The above dyno graph shows a Forge customer making gains of 52HP with this intercooler

Compatible Vehicles :

Audi

RS3
- 8V 2015-2017
- 8V Facelift 2017-2020

Additional information

Brand	Forge Motorsport
Make	Audi, RS3
Model Year	2015, 2016, 2017, 2018, 2019, 2020

Reviews

There are no reviews yet.

Be the first to review “Forge Motorsport Audi RS3 8V Intercooler (2015-) – FMINT4”

Quick Comparison

Settings Forge Motorsport Audi RS3 8V Intercooler (2015-) - FMINT4 remove BLACK BOOST MERCEDES AMG M157/M278 RACING COOLANT THERMOSTAT -BBTMT002 remove RACINGLINE OIL COOLER SYSTEM 2.0 TSI EA888 Gen.3 ENGINES – VWR18G700 remove CTS TURBO HIGH-PERFORMANCE RADIATOR FOR VW/AUDI MK7/8V/8S MQB (EA888.3) -CTS-HX-007 remove CTS TURBO MK8 GOLF R/ AUDI 8Y S3 TURBO OUTLET PIPE -CTS-IT-956 remove AIRTEC MOTORSPORT FRONT MOUNT INTERCOOLER FOR AUDI RS3 8Y - ATINTVAG43 remove

Name Forge Motorsport Audi RS3 8V Intercooler (2015-) - FMINT4 remove BLACK BOOST MERCEDES AMG M157/M278 RACING COOLANT THERMOSTAT -BBTMT002 remove RACINGLINE OIL COOLER SYSTEM 2.0 TSI EA888 Gen.3 ENGINES – VWR18G700 remove CTS TURBO HIGH-PERFORMANCE RADIATOR FOR VW/AUDI MK7/8V/8S MQB (EA888.3) -CTS-HX-007 remove CTS TURBO MK8 GOLF R/ AUDI 8Y S3 TURBO OUTLET PIPE -CTS-IT-956 remove AIRTEC MOTORSPORT FRONT MOUNT INTERCOOLER FOR AUDI RS3 8Y - ATINTVAG43 remove

Image

SKU FMINT4 BBTMT002 VWR18G700 CTS-HX-007 CTS-IT-956 ATINTVAG43

Rating

Price د.إ6,380.00 د.إ500.00 د.إ2,780.00 د.إ2,400.00 د.إ980.00 د.إ5,800.00

Stock

In Stock

Availability In Stock In Stock In Stock In Stock In Stock In Stock

Add to cart

Add to basket

Description Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here This product will be in stock and available for purchase. This product will be in stock and available for purchase. Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here

Content

Following on from our very successful intercooler for the RS3 8P chassis, the Forge intercooler for the RS3 8V chassis builds on our reputation for delivering cores that offer real-world increases in power and temperature drops. Whilst the 8V chassis shares many components with the older 8P, the space available behind the bumper is a different shape and the crash bar has also changed. This required a whole new intercooler and crash bar setup for this latest chassis* The RS3 8V core is a huge 640x250x100 and of bar and plate design. This gives it a huge 55% more surface area than stock, and an even more impressive 94% more volume. The end tanks are made with integrated pipes in order to retain the stock boost hoses, though you can also replace the hoses with our FMKT024 boost hose set if you so wish. Just like on the 8P chassis, we supply a genuine Audi RS3 crash bar which we modify in house in order to accept the new larger core, then finish both the crash bar and core in our standard black crackle finish powder coat for maximum longevity. As shown in the graph below, for both tests we let the car heatsoak on the dyno until the radiator fans tripped on and off (which gives an inlet temperature of 36°C), then do a dyno pull from there. This gives a more consistent result and reflects real-world driving conditions more accurately. You can easily see the Forge intercooler cools much quicker and delivers a much greater drop in temperature compared to OEM.

On the standard car we tested on, it made 362bhp completely stock (so largely in line with what Audi quote) with a peak intake temperature of 58°C. With just this intercooler fitted and no other modifications, the same car made 386bhp with a peak inlet temperature of 23°C, a gain of 24bhp and a drop of 35°C. Gains on mapped cars will likely be even more impressive as the stock intercooler core really starts to struggle on stage 1 mapped cars. The kit contains full instructions for installation, which should take around 3.5 hours, and a complete kit which includes everything needed. If your car is fitted with adaptive cruise control, we can additionally supply you with a billet bracket and fixings to enable the relocation of the ACC radar. Simply select the ACC option in the drop down menu above. No re-coding of the unit should be necessary.

The above dyno graph shows a Forge customer making gains of 52HP with this intercooler

Compatible Vehicles :

Audi

RS3
- 8V 2015-2017
- 8V Facelift 2017-2020

BlackBoost Performance Engineering - Racing Coolant Thermostat. With our BlackBoost Racing Coolant Thermostat the coolant circulation with the radiator is always at 100% open. The factory coolant thermostat opens at 100°C / 212°F. Only for racing application, not recommended be used under very cold weather conditions. Applicable for: all M157 / M278 engines

Racingline MQB VW Golf ‘R’/GTI 2.0 TSI OIL COOLER
FOR EA888 gen.3 & gen.4 ENGINES

The higher your power, the harder you drive, the more important it is to protect your oil with this Oil Cooler by RacingLine.

Racingline’s Oil Cooler kit is a complete ready to install package. An essential for any hard-driven Golf Mk7 GTI or ‘R’ running high power levels, hot climates or on the track. Of course, adding power generates more heat to disperse. Significantly increased oil temperatures mean only one thing: a decrease in the ability for your engine to stay properly lubricated. The new Racingline kit solves this problem: by adding in an additional air to oil cooler positioned right in the airflow in front of the car, oil temperatures are reduced by around 15-20ºc (of course this varies dependent on factors such as how the car is being driven, ambient temperatures and state of tune). Unlike many oil cooler kits, this keeps the factory Oil to Water cooler in position – effectively doubling up on your cooling. As oil passes through the new cooler first, that means less heat transfer back into your car’s water coolant circuit too.

WHY FIT AN OIL COOLER KIT?

Our Oil Cooler Kit is an essential fit for any hard-driven MQB or MQB 'Evo' 2.0 TSI car running high power levels or in hot climates. It's a complete ready to install package, using a clever sandwich plate design for straightforward and reliable installation.

Adding power to these 2.0 TSI engines generates more heat to disperse. Significantly increased oil temperatures means only one thing: a decrease in the ability for your engine to stay properly lubricated. At the same time, it's really important not to over-cool the oil; our 10-row kit is perfect.

Under hard driving, the stock oil cooler is easily overwhelmed. Failures start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade - losing its lubrication properties.

The RacingLine kit solves this problem: by adding in an additional air to oil cooler positioned right in the airflow in the front of the car, oil temperatures are reduced by around 15 - 20 degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune).

Our kit retains the factory oil to water cooler and adds to it with the front-mounted cooler - doubling up your cooling capability with less heat transfer into the water system.

As the oil moves away from the heat inside the engine, its temperature drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.

Supplied as a complete kit with every part ready for install.

What’s in the kit? – Oil Cooler mounting brackets – AN10 ‘210 Series’ Nylon braided feed and return lines – Billet CNC oil cooler sandwich plate – AN10 ’10-Row’ Oil Cooler Core – Billet oil filter housing with removable drop in filter – Fitting kit consisting of all necessary nuts, bolts, washers and rubber mountings

CONFIRMED APPLICATIONS

>	VW Golf 8 GTI	2020+
>	VW Golf 8 GTI Clubsport	2020+
>	VW Golf 8 R	2020+
>	VW Golf 7 & 7.5 GTI & Clubsport	2013-2020
>	VW Golf 7 & 7.5 R	2013-2020
>	VW Golf 7 & 7.5 1.8 TSI	2013-2020
>	VW Passat 2.0 TSI B8	2015+
>	VW Arteon 2.0 TSI	2017+
>	VW T-Roc R 2.0 TSI	2019+
>	VW Tiguan II 2.0 TSI	2016+
>	VW Jetta / GLI 7	2018+

>	Audi S3 8Y	2020+
>	Audi A3 2.0 TSI 8Y	2020+
>	Audi S3 8V	2013-2020
>	Audi A3 2.0 TSI / 1.8 TSI 8V	2013-2020
>	Audi TT 2.0 TSI 8S	2014+
>	Audi TTS 2.0 TSI 8S	2015+
>	Audi SQ2	2018+

CTS Turbo is proud to announce our Upgraded Aluminum Radiator for the VW/Audi MQB 1.8TSI and 2.0TSI vehicles. The factory radiator is small and not efficient enough to provide sufficient cooling to tuned engines. We designed our radiator to overcome that problem. CTS Turbo radiator has an increased volume over stock, with a dual-pass core was made to be higher flowing and larger than the factory, but still drop into the stock location using all the factory mounting points. To make things even better, this part will eliminate plastic endtanks that are prone to leaks. Keep your MQB running cool and reliably with CTS Turbo Aluminum Radiator. Features:

High Performance aluminum radiator
High-efficiency dual-pass core
Hand-welded and pressure tested to ensure reliable performance.
Plug-n-play replacement for the factory part, no modifications required if installed with factory intercooler.***

Note: Does not fit VW Tiguan or Audi Q3 models. Does not fit Gen3 non-MQB engines. ***Fitment with aftermarket intercoolers and/or charge pipes will require you to clearance the radiator fan shroud, remove the engine harness and coolant hoses from factory mounting location. One crashbar mounting bolt must be cut shorter to allow clearance with AC lines.

Make	Model	Year	Generation
AUDI	A3	2015 - 2020	8V
AUDI	S3	2015 - 2020	8V
AUDI	TT	2015 - 2021	8J

VW	GOLF R	2015 - 2020	MK7/7.5
VW	GOLF R	2021
VW	GTI	2015 - 2020	MK7/7.5
VW	GTI	2021	MK8

Introducing our high-performance Turbo Outlet Pipe specifically designed for the MK8 Golf R and Audi 8Y S3 models. Engineered to deliver exceptional results, our kit replaces the stock turbo outlet pipe with a more efficient and durable design, resulting in impressive airflow improvements, reduced turbulence, and enhanced overall performance gains. Crafted from mandrel-bent 60mm aluminum tubing, our Turbo Outlet Pipe guarantees optimal airflow without restrictions. This design ensures a smooth and efficient path, allowing the turbocharger to spool up faster and generate increased power. With our custom 5-ply silicone coupler, installation becomes a breeze, providing a hassle-free upgrade experience. We understand the importance of reliability and durability. That’s why our Turbo Outlet Pipe is meticulously engineered using high-quality materials, ensuring long-lasting performance under extreme temperatures and pressures. You can trust our product to withstand the demands of high-performance driving, allowing you to enjoy its benefits for years to come. Upgrade your MK8 Golf R or Audi 8Y S3 with our Turbo Outlet Pipe and unleash the true potential of your vehicle. Experience smoother power delivery and improved performance. Product Details:

60mm aluminum piping with CTS logo
5-ply silicon coupler
Factory mounting points are used for perfect fitment
Durable black powder coat finish
Compatible with factory and upgraded intakes
Compatible with factory and upgraded intercooler

Fitment:

2021+ Audi 8Y S3
2021+ MK8 Golf R

Make	Model	Year	Generation
AUDI	S3	2021 - 2023	8Y
VW	GOLF R	2021 - 2023	MK8

Freshly developed at AIRTEC HQ in the UK, we’re proud to launch our uprated front mount intercooler kit with integrated crash bar design (replaces the stock crash bar) aimed at modified Audi RS3 8Y owners who want the very highest level of cooling efficiency, power and performance for track or fast road use. Our solution to increasing the intercooler’s size and performance within the confines of the limited space behind the bumper is based upon a much larger taller stepped core design. This offers a huge 108% increase in overall capacity in comparison to the original intercooler, as well as colossal 125% increase in frontal area over standard, which allows it to make the most of the air flow provided. Together with our high-flow, moulded one-piece cast end tanks to ensure flow is directed correctly and efficiently, the AIRTEC Motorsport intercooler offers much greater efficiency and volume over standard and by integrating the crash bar into the design, the intercooler makes full use of the vehicle’s entire front grille area while still retaining the towing eye feature. Available in a high-quality powder coated black finish, the comprehensive kit is a direct replacement and attaches to the original boost pipes and clips. It comes complete with all fixtures and fittings, as well as detailed fitting instructions. Its proven cooling efficiency makes it an essential modification for all modified Audi RS3s. Dimensions: OEM intercooler: Width: 640mm Height: 163mm Depth: 80mm Capacity: 8.3 litres Front area: 1,043cm² AIRTEC Motorsport intercooler: Width: 627mm Height: 375mm Depth: 100mm to 50mm stepped core Capacity: 17.3 litres Front area: 2,351cm² Features:

Specifically designed for the 8Y RS3 model
108% increase in overall capacity in comparison to original
125% increase in frontal area over standard
Huge increase in cooling ability
Reduced charge temperatures
Incorporated crash bar design
High-flow, moulded one-piece cast end tanks
Powder coated black finish
Includes fittings and fixtures
Detailed fitting guide included

AIRTEC Part No: ATINTVAG43

Weight N/A N/A N/A N/A N/A N/A

Dimensions N/A N/A N/A N/A N/A N/A

Additional information

Brand	Forge Motorsport
Make	Audi, RS3
Model Year	2015, 2016, 2017, 2018, 2019, 2020

Brand	Black Boost
Make	AMG CLS63, AMG E63, AMG S63, Mercedes-Benz
Model Year	2011, 2012, 2013, 2014, 2015, 2016

Brand	Racingline
Make	A3, Audi, Golf GTI, Golf R, S3, SQ2, TT, TTS, Volkswagen
Model Year	2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

Brand	CTS Turbo
Make	A3, Audi, Golf GTI, Golf R, S3, TT, Volkswagen
Model Year	2015, 2016, 2017, 2018, 2019, 2020, 2021

Brand	CTS Turbo
Make	Audi, Golf R, S3, Volkswagen
Model Year	2021, 2022, 2023

Brand	Airtec Motorsport
Make	Audi, RS3
Model Year	2022, 2023