EVENTURI Carbon Fiber Intake System VW GOLF MK7 MK7.5 GTI, R – EVE-2TFSI-CF-INT
د.إ3,900.00
Upon placing the order, we will get in touch with you to confirm the availability information.
For Instant Enquiry and More Details, Please Click Here
In Stock
Did you like this product? Add to favorites now and follow the product.
Add to Wishlist
Add to Wishlist
Description
Performance Increase : 16-25hp, 15-22ft-lb
The VAG 2.0 TFSi Eventuri intake has been developed to provide the most efficient and direct airflow path to the turbo. By replacing the OEM our Patent Pending Venturi housing and coupling this with a smooth duct, we have ensured that the airlfow remains as laminar as possible. Furthermore, the addition of a true cold air feed by adding a scoop to the front grill results in the lowest possible inlet air temperature. The result is an optimised intake system which delivers noticeable performance gains consistently.
The Eventuri Difference
The 2.0 TFSi system uses our Patent Pending Carbon fibre Housing which provides an aerodynamically efficient airflow path from the filter to the turbo tube. Not just another cone filter with a heat shield but a unique design which allows airflow to remain laminar and thus improve the turbo efficiency. You can read more about the housing design and how it works here.
The standard airbox is cuboid in shape which gives rise to turbulence and increases the drag on the turbo as a result. Furthermore it draws air from a duct, which despite extending over the entire grill is in fact only open on one side and this opening is also facing the engine so the airbox draws in warm engine bay heat. In addition, when the bonnet is closed, the only direct path for cold air is from the small slots in the top of the grill (for the Golf 7 variants).
The following dyno graphs show the before and after results on a Golf 7 R which already had a remap. So both the stock airbox and the Eventuri were tested with the same remap in place. All tests were carried out back to back on the same day with the BONNET CLOSED ON ALL OCCASIONS.
Independent Dyno Test BR Performance from Belgium have tested this intake on a stage 1 tuned Clubsport using their in-house dyno and the intake achieved a 19HP gain:
Single VS Double Duct During the development of our system we designed and tested both the single duct and also an extended double duct version:
The testing showed that the double duct did not produce more power, in fact we could not achieve the same results as we did with our single duct design. This is because the single duct allows for the smoothest and most direct airflow path to the filter. With the scoop directly in front of the opening there is no chance for warm air to mix with the airflow. Furthermore on the double duct, the airflow has to travel at almost a 90 degree angle from the far side of the grill to then enter the filter housing. Here is a dyno graph showing the results we achieved with both duct designs:
Part Numbers:
-
- EVE-2TFSI-CF-INT : Audi S3 2.0 TFSI Full Black Carbon intake
- EVE-2TFSI-KV-INT : Audi S3 2.0 TFSI Full Kevlar intake
The Eventuri Golf 7 intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. Here are the details for each component and the design ethos behind them:
-
- Each intake system consists of:
-
-
- Prepreg Carbon Fibre Venturi Housing
- High Flow Double Cone Air Filter
- Aluminium Cowl for smooth airflow entry
- Prepeg Carbon Fibre Intake Duct (also available in plastic)
- Laser Cut Cold Air Scoop with Surround
- Laser Cut Stainless Steel Brackets
- Laser Cut Slam Panel Plate
-
Carbon Intake Housing and Duct
-
- The filter housing comprises of a high flow filter, aluminium cowl, laser cut bracket and the carbon pod itself. The carbon pod shrouds the reverse mounted filter and smoothly shapes the airflow down to the intake tube. This smooth reduction in cross sectional area invokes the Venturi effect where the airflow accelerates whilst maintaining laminar conditions. It can be thought of as a large velocity stack – below is a diagram to show the comparison between our patent pending design and a regular intake system. Further details can be read in the Technology page. The duct channels cold air from the slam panel opening to the filter. By designing the duct to smoothly transition from the rectangular opening at the front to the circular opening for the filter, it allows the airflow to remain as direct and smooth as possible.
PATENTED TECHNOLOGY
-
- Our patented filter housing has a smooth reduction in cross sectional area as it shrouds the filter and tapers down to the tubing. This geometry invokes the Venturi effect where the airflow accelerates whilst maintaining laminar conditions. It can be thought of as a large velocity stack – below is a diagram to show the comparison between our patented design and a regular intake system. Our bespoke filters aid the airflow moving through the housings and allow for an even velocity profile as the airflow exits the housings. Further details can be read in the Technology and Filters pages.
Single Duct VS Double Duct
-
- During the development of our system we designed and tested both the single duct and also an extended double duct version:
-
- Testing showed that the double duct did not produce more power, in fact we could not achieve the same results as we did with our single duct design. This is because the single duct allows for the smoothest and most direct airflow path to the filter and the cross sectional area of the opening is not restrictive for this engine. With the scoop directly in front of the opening there is no chance for warm air to mix with the airflow. Furthermore on the double duct, the airflow has to travel at almost a 90 degree angle from the far side of the grill to then enter the filter housing. A dyno graph comparing the single and double duct can be seen in the Performance tab.
Cold Air Scoop
-
- A key feature of our system is the addition of a scoop into the grill which opens up a direct path for cold air to enter the duct. When the bonnet is closed, it prevents a direct air feed to the duct and the only path for cold air to enter is the small gap between the closed bonnet and the top of the grill – or the small slits on the other side of the grill. This means that the intake will draw some air in from the hot engine bay area. With our scoop system – when the car is in motion there is minimal chance for hot air to enter the intake and so the intake temperatures are lower than the OEM airbox. Here is a thermal imaging video of the engine bay showing how cool the intake system is after a good drive.
Additional information
| Brand | EVENTURI |
|---|---|
| Make | Golf GTI, Golf R, Volkswagen |
| Model Year | 2013, 2014, 2015, 2016, 2017, 2018, 2019 |
Be the first to review “EVENTURI Carbon Fiber Intake System VW GOLF MK7 MK7.5 GTI, R – EVE-2TFSI-CF-INT”
Quick Comparison
| Settings | EVENTURI Carbon Fiber Intake System VW GOLF MK7 MK7.5 GTI, R - EVE-2TFSI-CF-INT remove | RACINGLINE TURBO INLET HOSE FOR GOLF R, GOLF GTI, AUDI S3, AUDI TT and more with 2.0 TSI EA888.3 VWR12G7R600IT remove | MERCEDES AMG M178 (190) COLD AIR INTAKE SYSTEM remove | MERCEDES BENZ M177 G63 COLD AIR INTAKE remove | MERCEDES AMG M157/M278 (212/218) COLD AIR INTAKE SYSTEM remove | MERCEDES AMG M177 S63 COLD AIR INTAKE SYSTEM remove | ||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | EVENTURI Carbon Fiber Intake System VW GOLF MK7 MK7.5 GTI, R - EVE-2TFSI-CF-INT remove | RACINGLINE TURBO INLET HOSE FOR GOLF R, GOLF GTI, AUDI S3, AUDI TT and more with 2.0 TSI EA888.3 VWR12G7R600IT remove | MERCEDES AMG M178 (190) COLD AIR INTAKE SYSTEM remove | MERCEDES BENZ M177 G63 COLD AIR INTAKE remove | MERCEDES AMG M157/M278 (212/218) COLD AIR INTAKE SYSTEM remove | MERCEDES AMG M177 S63 COLD AIR INTAKE SYSTEM remove | ||||||||||||||||||||||||||||||||||||||||||||||||
| Image |  |  |  |  |  |  | ||||||||||||||||||||||||||||||||||||||||||||||||
| SKU | EVE-2TFSI-CF-INT | VWR12G7R600ITHOSE | BBCAIS005 | BBCAIS014 | BBCAIS003 | BBCAIS019 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Price | د.إ3,900.00 | د.إ510.00 | د.إ5,000.00 | د.إ5,000.00 | د.إ5,000.00 | د.إ5,000.00 | ||||||||||||||||||||||||||||||||||||||||||||||||
| Stock | In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| ||||||||||||||||||||||||||||||||||||||||||||||||
| Availability | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock | ||||||||||||||||||||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | This product will be in stock and available for purchase. | This product will be in stock and available for purchase. BlackBoost Performance Engineering Cold Air Intake System for the AMG GT / GTS / GTC / GTR 4.0l V8 BiTurbo. | This product will be in stock and available for purchase. BlackBoost Performance Engineering Cold Air Intake System for the G63 AMG 4.0l V8 BiTurbo M177. | This product will be in stock and available for purchase. BlackBoost Performance Engineering Cold Air Intake System for the E63(S) / CLS63(S) AMG 5.5l V8 BiTurbo. | This product will be in stock and available for purchase. BlackBoost Performance Engineering Cold Air Intake System for the M177 S63 Cold Air Intake Kit (2017-2021) | ||||||||||||||||||||||||||||||||||||||||||||||||
| Content | Performance Increase : 16-25hp, 15-22ft-lb
The VAG 2.0 TFSi Eventuri intake has been developed to provide the most efficient and direct airflow path to the turbo. By replacing the OEM our Patent Pending Venturi housing and coupling this with a smooth duct, we have ensured that the airlfow remains as laminar as possible. Furthermore, the addition of a true cold air feed by adding a scoop to the front grill results in the lowest possible inlet air temperature. The result is an optimised intake system which delivers noticeable performance gains consistently.
The Eventuri Difference
The 2.0 TFSi system uses our Patent Pending Carbon fibre Housing which provides an aerodynamically efficient airflow path from the filter to the turbo tube. Not just another cone filter with a heat shield but a unique design which allows airflow to remain laminar and thus improve the turbo efficiency. You can read more about the housing design and how it works here.
The standard airbox is cuboid in shape which gives rise to turbulence and increases the drag on the turbo as a result. Furthermore it draws air from a duct, which despite extending over the entire grill is in fact only open on one side and this opening is also facing the engine so the airbox draws in warm engine bay heat. In addition, when the bonnet is closed, the only direct path for cold air is from the small slots in the top of the grill (for the Golf 7 variants).
The following dyno graphs show the before and after results on a Golf 7 R which already had a remap. So both the stock airbox and the Eventuri were tested with the same remap in place. All tests were carried out back to back on the same day with the BONNET CLOSED ON ALL OCCASIONS.
Independent Dyno Test BR Performance from Belgium have tested this intake on a stage 1 tuned Clubsport using their in-house dyno and the intake achieved a 19HP gain:
Single VS Double Duct During the development of our system we designed and tested both the single duct and also an extended double duct version:
The testing showed that the double duct did not produce more power, in fact we could not achieve the same results as we did with our single duct design. This is because the single duct allows for the smoothest and most direct airflow path to the filter. With the scoop directly in front of the opening there is no chance for warm air to mix with the airflow. Furthermore on the double duct, the airflow has to travel at almost a 90 degree angle from the far side of the grill to then enter the filter housing. Here is a dyno graph showing the results we achieved with both duct designs:
Part Numbers:
Single Duct VS Double Duct
| HI-FLOW SILICONE TURBO INLET HOSE 2.0 TSI EA888 gen.3Flow that airflow smoothly from your intake into the turbo. The Racingline Performance High-Flow Turbo Inlet Pipe for MQB Golf 7 GTI/R plus Audi S3 has been engineered to increase air flow through to the turbocharger as the perfect compliment the R600 Intake System or even the standard airbox.WHAT IT DOES.The VWR High-Flow Turbo Inlet Hose is for all MQB 2.0 and 1.8 TSI cars. The reinforced Silicone Inlet Hose has been engineered to increase air flow through to the turbocharger as the perfect compliment our VWR R600 Cold Air Intake or even the standard airbox.
CONFIRMED APPLICATIONS
| AIR BOXES The filter is only half the battle when designing this product, as maintaining nothing but cold air into the engine is equally important when it comes to an air intake system. Many companies claim to have cold air intake systems, but with air boxes that only go around half of the filter, it is obvious that there is still a massive amount of ultra hot air from the radiator entering the engine directly. The cooler the air that enters the engine, the higher the power, because cooler air is more dense, and having more air molecules entering the combustion chamber allows you to add more fuel, ultimately resulting in more power! Higher reliability is achieved also, as an engine running cooler is an engine less prone to knock causing detonation; a true engine killer! These engines are very sensitive and highly tuned German built machines, and the engineers at Mercedes would lose sleep at night knowing that hot air is entering their precious mechanical masterpiece of an engine. Our intake is designed with an airbox that fully isolates the filter from every single side, and incorporates a compressible rubber gasket on it’s upper edge to seal against the hood, guaranteeing that once the hood is closed absolutely zero hot engine bay air can enter the engine. One look at the complexity of the folds and shape of our airbox and it is easy to see why nobody else has made a fully sealed design, while simultaneously using such a large filter.. With many bends and edges formed to match the ultra-tight space available, the engineering that has gone into these assemblies is quite complex and in depth. Even we have gone the extra length to add compound long radius bends into the process of manufacturing the inlet areas, so the factory inlet tubes fit with a tight seal, assuring that no hot engine bay air leaks inside. This airbox is entirely designed in 3D CAD software, laser cut, CNC bent, and professionally TIG welded all by highly skilled craftsmen. Utilizing aircraft grade 6061 Aluminum, and finished with a highly durable and heat resistant black textured powdercoating, it is easy to see that staying lightweight, maintaining the lowest temperatures and also having the highest quality is our greatest concern. BMC FILTERS We utilize BMC air filters, with the best filtration ability of any other company in the world, companies like Lamborghini, Ferrari and Porsche are known to use BMC in certain factory applications. You cannot have the best intake without having the best filters, and the Italian made BMC filter brand is at the top of the filter food chain. They filter an incredible 7 micron size particle, factory paper filters can only achieve 10 microns. The physical size of our filters are the largest available from any company on the market giving you a significantly higher surface area for filtration. The particular BMC filter we choose to use is a twin air design, meaning there is an additional set of filter elements in the front of the filter, giving even more available flow than would otherwise be offered. When you consider that BMC filters are already the best, and additionally we are using larger filters with more surface area than any other company, it is easy to see why greater performance is the obvious outcome in such a scenario, as we achieve higher flow! PERSONALIZED LASER ENGRAVED LOGO PLATES Something that we are very proud of here at Blackboost is how we are able to achieve world class performance gains with only the highest quality products, while simultaneously designing things in a very visually attractive and classy manner. Form always follows function for us, as we always prioritize the highest possible power levels, however we make a way for our products to look good as well! Everything about our intake is beautiful, however the one touch we are especially proud of is our Laser cut and engraved Stainless steel logo plates! With our signature Honeycomb engraving to give a well thought out look, as well as incorporating our company’s name, the information about the product, a serial number, and also the option to write who the intake is hand crafted for! If you do not want to write your name, you can write anything you want within the available space, this is your choice, and if you choose not to write anything this is also ok. We care a lot about make our products special and personal for the customer, and we have found that a really amazing way to do this is to give this option to write your own name or title on the logo plates. Ultimately all of this effort results in something you can feel proud to display and show off to your friends when opening your hood! In Conclusion, It is obvious why a Blackboost intake system is the best choice for your precious 5.5l V8 BiTurbo M157 Mercedes AMG. With significant HP and TQ increases, the highest quality and flowing filter from BMC in Italy, the best sealing airboxes that keep all hot engine bay air out, ultra light weight TIG welded Aircraft grade 6061 aluminum construction, a textured black powder coated finish for excellent heat insulation and a classy look, a vent to atmosphere blow off valve conversion, a customizable logo plate, and even a highly competitive price, There simply is no better option! Performance figures here in the United Arab Emirates showed us an performance increase of 0,1x seconds 100km/h – 200km/h. The kit includes the following: - 2 air boxes - Material 6061Al in 2mm - rubber seal - 2 intake with velocity stack 4" to 3.5" - 2 twin BMC Air Filter - textured black powder coating - Stainless laser engraved logo plate, optional to have it personalized - Bolt on installation | AIR BOXES The filter is only half the battle when designing this product, as maintaining nothing but cold air into the engine is equally important when it comes to an air intake system. Many companies claim to have cold air intake systems, but with air boxes that only go around half of the filter, it is obvious that there is still a massive amount of ultra hot air from the radiator entering the engine directly. The cooler the air that enters the engine, the higher the power, because cooler air is more dense, and having more air molecules entering the combustion chamber allows you to add more fuel, ultimately resulting in more power! Higher reliability is achieved also, as an engine running cooler is an engine less prone to knock causing detonation; a true engine killer! These engines are very sensitive and highly tuned German built machines, and the engineers at Mercedes would lose sleep at night knowing that hot air is entering their precious mechanical masterpiece of an engine. Our intake is designed with an airbox that fully isolates the filter from every single side, and incorporates a compressible rubber gasket on it’s upper edge to seal against the hood, guaranteeing that once the hood is closed absolutely zero hot engine bay air can enter the engine. One look at the complexity of the folds and shape of our airbox and it is easy to see why nobody else has made a fully sealed design, while simultaneously using such a large filter.. With many bends and edges formed to match the ultra-tight space available, the engineering that has gone into these assemblies is quite complex and in depth. Even we have gone the extra length to add compound long radius bends into the process of manufacturing the inlet areas, so the factory inlet tubes fit with a tight seal, assuring that no hot engine bay air leaks inside. This airbox is entirely designed in 3D CAD software, laser cut, CNC bent, and professionally TIG welded all by highly skilled craftsmen. Utilizing aircraft grade 6061 Aluminum, and finished with a highly durable and heat resistant black textured powdercoating, it is easy to see that staying lightweight, maintaining the lowest temperatures and also having the highest quality is our greatest concern. BMC FILTERS We utilize BMC air filters, with the best filtration ability of any other company in the world, companies like Lamborghini, Ferrari and Porsche are known to use BMC in certain factory applications. You cannot have the best intake without having the best filters, and the Italian made BMC filter brand is at the top of the filter food chain. They filter an incredible 7 micron size particle, factory paper filters can only achieve 10 microns. The physical size of our filters are the largest available from any company on the market giving you a significantly higher surface area for filtration. The particular BMC filter we choose to use is a twin air design, meaning there is an additional set of filter elements in the front of the filter, giving even more available flow than would otherwise be offered. When you consider that BMC filters are already the best, and additionally we are using larger filters with more surface area than any other company, it is easy to see why greater performance is the obvious outcome in such a scenario, as we achieve higher flow! PERSONALIZED LASER ENGRAVED LOGO PLATES Something that we are very proud of here at Blackboost is how we are able to achieve world class performance gains with only the highest quality products, while simultaneously designing things in a very visually attractive and classy manner. Form always follows function for us, as we always prioritize the highest possible power levels, however we make a way for our products to look good as well! Everything about our intake is beautiful, however the one touch we are especially proud of is our Laser cut and engraved Stainless steel logo plates! With our signature Honeycomb engraving to give a well thought out look, as well as incorporating our company’s name, the information about the product, a serial number, and also the option to write who the intake is hand crafted for! If you do not want to write your name, you can write anything you want within the available space, this is your choice, and if you choose not to write anything this is also ok. We care a lot about make our products special and personal for the customer, and we have found that a really amazing way to do this is to give this option to write your own name or title on the logo plates. Ultimately all of this effort results in something you can feel proud to display and show off to your friends when opening your hood! | Here at Blackboost we strive to make only the best, we are simply not interested in developing products that are just like any other. This is easy to see this when looking at our cold air intake system developed for the Mercedes W212 E63(S) W218 CLS63 AMG with it’s BiTurbo 5.5l biturbo engine. Many innovations exist here that are simply not seen within the rest of the aftermarket, from the type of filters we use, to the level of complexity of our air box / heat shields, to the fully sealed design, to the vent to atmosphere blow off valve conversion and customized logo plate. Read below to see an itemized list of what makes our product superior to the rest: AIR BOXES The filter is only half the battle when designing this product, as maintaining nothing but cold air into the engine is equally important when it comes to an air intake system. Many companies claim to have cold air intake systems, but with air boxes that only go around half of the filter, it is obvious that there is still a massive amount of ultra hot air from the radiator entering the engine directly. The cooler the air that enters the engine, the higher the power, because cooler air is more dense, and having more air molecules entering the combustion chamber allows you to add more fuel, ultimately resulting in more power! Higher reliability is achieved also, as an engine running cooler is an engine less prone to knock causing detonation; a true engine killer! These engines are very sensitive and highly tuned German built machines, and the engineers at Mercedes would lose sleep at night knowing that hot air is entering their precious mechanical masterpiece of an engine. Our intake is designed with an airbox that fully isolates the filter from every single side, and incorporates a compressible rubber gasket on it’s upper edge to seal against the hood, guaranteeing that once the hood is closed absolutely zero hot engine bay air can enter the engine. One look at the complexity of the folds and shape of our airbox and it is easy to see why nobody else has made a fully sealed design, while simultaneously using such a large filter.. With many bends and edges formed to match the ultra-tight space available, the engineering that has gone into these assemblies is quite complex and in depth. Even we have gone the extra length to add compound long radius bends into the process of manufacturing the inlet areas, so the factory inlet tubes fit with a tight seal, assuring that no hot engine bay air leaks inside. This airbox is entirely designed in 3D CAD software, laser cut, CNC bent, and professionally TIG welded all by highly skilled craftsmen. Utilizing aircraft grade 6061 Aluminum, and finished with a highly durable and heat resistant black textured powdercoating, it is easy to see that staying lightweight, maintaining the lowest temperatures and also having the highest quality is our greatest concern. BMC FILTERS We utilize BMC air filters, with the best filtration ability of any other company in the world, companies like Lamborghini, Ferrari and Porsche are known to use BMC in certain factory applications. You cannot have the best intake without having the best filters, and the Italian made BMC filter brand is at the top of the filter food chain. They filter an incredible 7 micron size particle, factory paper filters can only achieve 10 microns. The physical size of our filters are the largest available from any company on the market giving you a significantly higher surface area for filtration. The particular BMC filter we choose to use is a twin air design, meaning there is an additional set of filter elements in the front of the filter, giving even more available flow than would otherwise be offered. When you consider that BMC filters are already the best, and additionally we are using larger filters with more surface area than any other company, it is easy to see why greater performance is the obvious outcome in such a scenario, as we achieve higher flow! PERSONALIZED LASER ENGRAVED LOGO PLATES Something that we are very proud of here at Blackboost is how we are able to achieve world class performance gains with only the highest quality products, while simultaneously designing things in a very visually attractive and classy manner. Form always follows function for us, as we always prioritize the highest possible power levels, however we make a way for our products to look good as well! Everything about our intake is beautiful, however the one touch we are especially proud of is our Laser cut and engraved Stainless steel logo plates! With our signature Honeycomb engraving to give a well thought out look, as well as incorporating our company’s name, the information about the product, a serial number, and also the option to write who the intake is hand crafted for! If you do not want to write your name, you can write anything you want within the available space, this is your choice, and if you choose not to write anything this is also ok. We care a lot about make our products special and personal for the customer, and we have found that a really amazing way to do this is to give this option to write your own name or title on the logo plates. Ultimately all of this effort results in something you can feel proud to display and show off to your friends when opening your hood! In Conclusion, It is obvious why a Blackboost intake system is the best choice for your precious E63 AMG Mercedes. With significant HP and TQ increases, the highest quality and flowing filter from BMC in Italy, the best sealing airboxes that keep all hot engine bay air out, ultra light weight TIG welded Aircraft grade 6061 aluminum construction, a textured black powdercoated finish for excellent heat insulation and a classy look, a vent to atmosphere blow off valve conversion, a customizable logo plate, and even a highly competitive price, There simply is no better option! Performance figures here in the United Arab Emirates showed us an performance increase of 0,1x seconds 100km/h - 200km/h. The kit includes the following: - 2 air boxes - Material 6061Al in 2mm - Laser cut and TIG welded - rubber seal - 2 twin BMC Air Filter - textured black powder coating - Stainless laser engraved logo plate, optional to have it personalized - Bolt on installation Important Note for CLS550/500 E550/500 4.7l V8 M278 owners. The OEM engine cover cant be installed with our Cold Air Intake System, it will fit with the 63 AMG M157 engine cover. | AIR BOXES The filter is only half the battle when designing this product, as maintaining nothing but cold air into the engine is equally important when it comes to an air intake system. Many companies claim to have cold air intake systems, but with air boxes that only go around half of the filter, it is obvious that there is still a massive amount of ultra hot air from the radiator entering the engine directly. The cooler the air that enters the engine, the higher the power, because cooler air is more dense, and having more air molecules entering the combustion chamber allows you to add more fuel, ultimately resulting in more power! Higher reliability is achieved also, as an engine running cooler is an engine less prone to knock causing detonation; a true engine killer! These engines are very sensitive and highly tuned German built machines, and the engineers at Mercedes would lose sleep at night knowing that hot air is entering their precious mechanical masterpiece of an engine. Our intake is designed with an airbox that fully isolates the filter from every single side and incorporates a compressible rubber gasket on it’s upper edge to seal against the hood, guaranteeing that once the hood is closed absolutely zero hot engine bay air can enter the engine. One look at the complexity of the folds and shape of our airbox and it is easy to see why nobody else has made a fully sealed design, while simultaneously using such a large filter. With many bends and edges formed to match the ultra-tight space available, the engineering that has gone into these assemblies is quite complex and in depth. Even we have gone the extra length to add compound long radius bends into the process of manufacturing the inlet areas, so the factory inlet tubes fit with a tight seal, assuring that no hot engine bay air leaks inside. This airbox is entirely designed in 3D CAD software, laser cut, CNC bent, and professionally TIG welded all by highly skilled craftsmen. Utilizing aircraft grade 6061 Aluminum, and finished with a highly durable and heat resistant black textured powdercoating, it is easy to see that staying lightweight, maintaining the lowest temperatures and also having the highest quality is our greatest concern. VENT TO ATMOSPHERE BLOW OFF VALVE With this intake system, unlike many other companies, we choose to simply eliminate the factory recirculating blow off valve inlet hose, and allow the blow off valves to vent to the open atmosphere. This is a major advantage when you consider that every time the factory system recirculates air back into the front of the turbo using the Blow off Valve, it is actually sending ultra hot post-turbo compressed air back into the inlet, creating a large increase in air intake temperatures every time you release the throttle, or during shifts. By eliminating this factory recirculation, your air intake temperatures lower and your cooling system stay cooler as well. You also get the added benefit of having an awesome Wooshing Blow off valve sound, something that often people will pay for as an added option, however the elimination of this recirculating tube is standard on our kits. TURBO INTAKE TUBES Our intake tubes are made from aircraft grade and mandrel bent 6061 Aluminum, and are fabricated and TIG welded by our skilled in house craftsmen. They are also powder coated in a beautiful, highly durable, and heat dissipating textured black finish for a classy look. The real advantage to our intake tube over others on the market is the incorporated velocity stack which can be found inside the mouth of the filter. Velocity stacks are and have been used in motorsports for many years, as a means of smoothing out the flow of air entering the tube, resulting in a higher flowing design. With such a smooth and beautiful transition from the filter into the tube, air is accelerated into the turbo at a higher speed than would otherwise be seen, which results in even higher power levels, just because it is easier for the air to enter! BMC FILTERS We utilize BMC air filters, with the best filtration ability of any other company in the world, companies like Lamborghini, Ferrari and Porsche are known to use BMC in certain factory applications. You cannot have the best intake without having the best filters, and the Italian made BMC filter brand is at the top of the filter food chain. They filter an incredible 7 micron size particle, factory paper filters can only achieve 10 microns. The physical size of our filters are the largest available from any company on the market giving you a significantly higher surface area for filtration. The particular BMC filter we choose to use is a twin air design, meaning there is an additional set of filter elements in the front of the filter, giving even more available flow than would otherwise be offered. When you consider that BMC filters are already the best, and additionally we are using larger filters with more surface area than any other company, it is easy to see why greater performance is the obvious outcome in such a scenario, as we achieve higher flow! PERSONALIZED LASER ENGRAVED LOGO PLATES Something that we are very proud of here at Blackboost is how we are able to achieve world class performance gains with only the highest quality products, while simultaneously designing things in a very visually attractive and classy manner. Form always follows function for us, as we always prioritize the highest possible power levels, however we make a way for our products to look good as well! Everything about our intake is beautiful, however the one touch we are especially proud of is our Laser cut and engraved Stainless steel logo plates! With our signature Honeycomb engraving to give a well thought out look, as well as incorporating our company’s name, the information about the product, a serial number, and also the option to write who the intake is hand crafted for! If you do not want to write your name, you can write anything you want within the available space, this is your choice, and if you choose not to write anything this is also ok. We care a lot about making our products special and personal for the customer, and we have found that a really amazing way to do this is to give this option to write your own name or title on the logo plates! Another detail that is worth covering is that these logo plates actually are bolted into the airbox on a separate piece, as the filter simply will not go in or out of the box without the piece unbolting. It just goes to show, when presented with the challenge of how to fit a logo plate, we didn’t give up, we increased the complexity of our product because we care that much about giving the finishing touches that it deserves, ultimately resulting in something you can feel proud to display and show off to your friends. | ||||||||||||||||||||||||||||||||||||||||||||||||
| Weight | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|
Related products
Copyright 2023 © VagLogic Designed by Sunwin Solutions SG
Reviews
There are no reviews yet.