Boost_tap_for_the_EA888_Gen_3_VAG_18_and_20_Turbo_engines_68539

Brand	Forge Motorsport
Make	A4, A5, Audi, Golf GTI, Golf R, Q5, S1, S3, Volkswagen
Model Year	2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

Forge Motorsport Boost Gauge fitting kit for the EA888 Gen 3, VAG 1.8 and 2.0 Tsi engines – FMBGFK6

Name: Forge Motorsport Boost Gauge fitting kit for the EA888 Gen 3, VAG 1.8 and 2.0 Tsi engines - FMBGFK6 - VagLogic Auto Service Center
SKU: FMBGFK6
Price: 390.00 AED
Availability: InStock

SKU: FMBGFK6

In Stock

د.إ390.00

Upon placing the order, we will get in touch with you to confirm the availability information.

For Instant Enquiry and More Details, Please Click Here

In Stock

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist

Low Prices

Price match guarantee

Guaranteed Fitment.

Always the correct part

In-House Experts.

We know our products

Wide Product Selection

Endless Possibilities

Category: Cooling Systems

Description

Simple 5 minute install to give you a vacuum / boost connection suitable for installing a boost gauge or dump valve.

Our design allows you to refit the original engine cover after installation and is totally reversible.

Compatible Vehicles :

Audi

A4
- 2.0 TFSI (B9)
A5
- 2.0 TSI 2012 Onwards
Q5
- 2.0 TSI 2013 Onwards
S1
S3
- 2.0 TSI (8V Chassis)

Volkswagen

Arteon
- 2.0 TSI
Golf
- MK7
  - GTI
  - GTI Clubsport ED40
  - R
- MK7.5
  - GTI
  - R
Scirocco
- 2.0 TSI 2015 Onwards

Additional information

Brand	Forge Motorsport
Make	A4, A5, Audi, Golf GTI, Golf R, Q5, S1, S3, Volkswagen
Model Year	2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

Reviews

There are no reviews yet.

Be the first to review “Forge Motorsport Boost Gauge fitting kit for the EA888 Gen 3, VAG 1.8 and 2.0 Tsi engines – FMBGFK6”

Quick Comparison

Settings Forge Motorsport Boost Gauge fitting kit for the EA888 Gen 3, VAG 1.8 and 2.0 Tsi engines - FMBGFK6 remove CTS TURBO VW MQB MK8 GTI/GOLF R DIRECT FIT INTERCOOLER -CTS-20T-MK8-DF remove Forge Motorsport Intercooler for VW Golf MK8/Audi S3 - FMINT24 remove CTS TURBO CHARGE PIPE UPGRADE KIT FOR BMW G20/G29/G05/G07/G11 AND A90 TOYOTA SUPRA B58C 3.0L - CTS-IT-349 remove RACINGLINE OIL COOLER SYSTEM 2.0 TSI EA888 Gen.3 ENGINES – VWR18G700 remove RACINGLINE REMOTE FILL WASHER REFILL KIT FOR GOLF R and AUDI S3 WITH OIL CATCH CAN KIT VWR13G700RFK remove

Name Forge Motorsport Boost Gauge fitting kit for the EA888 Gen 3, VAG 1.8 and 2.0 Tsi engines - FMBGFK6 remove CTS TURBO VW MQB MK8 GTI/GOLF R DIRECT FIT INTERCOOLER -CTS-20T-MK8-DF remove Forge Motorsport Intercooler for VW Golf MK8/Audi S3 - FMINT24 remove CTS TURBO CHARGE PIPE UPGRADE KIT FOR BMW G20/G29/G05/G07/G11 AND A90 TOYOTA SUPRA B58C 3.0L - CTS-IT-349 remove RACINGLINE OIL COOLER SYSTEM 2.0 TSI EA888 Gen.3 ENGINES – VWR18G700 remove RACINGLINE REMOTE FILL WASHER REFILL KIT FOR GOLF R and AUDI S3 WITH OIL CATCH CAN KIT VWR13G700RFK remove

Image

SKU FMBGFK6 CTS-20T-MK8-DF FMINT24 CTS-IT-349 VWR18G700 VWR13G700RFK

Rating

Price د.إ390.00 د.إ3,900.00 د.إ4,190.00 د.إ1,300.00 د.إ2,780.00 د.إ300.00

Stock

In Stock

Availability In Stock In Stock In Stock In Stock In Stock In Stock

Add to cart

Add to basket

Description Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here This product will be in stock and available for purchase. This product will be in stock and available for purchase.

Content

Boost gauge fitting kit for the EA888 Gen 3, VAG 1.8 and 2.0 Tsi engines found in many new vehicles including the Golf Mk7, Audi S1, Audi S3 (8V chassis), Seat Leon Cupra 280 etc… This adaptor installs between the boost (MAP) sensor and the inlet manifold. Simple 5 minute install to give you a vacuum / boost connection suitable for installing a boost gauge or dump valve. Our design allows you to refit the original engine cover after installation and is totally reversible.

Compatible Vehicles :

Audi

A4
- 2.0 TFSI (B9)
A5
- 2.0 TSI 2012 Onwards
Q5
- 2.0 TSI 2013 Onwards
S1
S3
- 2.0 TSI (8V Chassis)

Volkswagen

Arteon
- 2.0 TSI
Golf
- MK7
  - GTI
  - GTI Clubsport ED40
  - R
- MK7.5
  - GTI
  - R
Scirocco
- 2.0 TSI 2015 Onwards

This is the CTS Turbo Direct-Fit intercooler upgrade for VW MQB MK8 GOLF GTI/GOLF R with updated BLACK finish. It is important to upgrade your intercooler to keep the AIT low and your car running at it’s best. Heat soak from stock or inferior intercoolers will rob you of performance and could lead to pinging/timing pull. CTS Turbo premium intercooler upgrade is a direct replacement for your factory intercooler. Our intercooler allows you to keep the charged air cold and keep your power consistent. High flowing core allows for minimal pressure drop and allows air to pass through to the radiator. Silicone hoses are included! Features:

High-density bar-and-plate core with cast end tanks, capable of supporting 600whp.
Airflow directing fins are cast into the end tanks to help with even air distribution inside the intercooler.
Fully compatible with Adaptive Cruise Control (ACC) and Frontal Collision Warning system Collision Warning system to be adapted by VW after install).
One of the largest intercooler cores on the market with complete direct fitment.
CAD engineered for excellent performance and perfect fitment.
High-pass core allows outside air to get to radiator without issue.

Fitment:

2022 MK8 Golf GTI
2022 MK8 Golf R

Make	Model	Year	Generation
VW	GOLF R	2022	MK8
VW	GTI	2022	MK8

FMINT24 is a performance intercooler for the MQB platforms with the EA888 GEN4 Engine. Produced, designed, and tested, at our headquarters in Gloucester UK. Throughout the development process we have strived to improve the efficiency and performance of the EA888 GEN4 engine. Our project brief was to develop an intercooler that utilised all of the available space in the original position of the OEM intercooler, and to ensure the inlet air temperature is reduced, without any negative effects on the boost pressure or engine and transmission cooling. In the MQB chassis the intercooler housing is particularly restricted and confined to a small amount of space, due to it not only housing the intercooler, but also the radiator and air conditioning condenser. The front panel in theory is a sandwich pack that houses the auxiliary cooling components. This means in order to increase the size of the intercooler without paying detriment to the performance of the surrounding items, and with also having very little extra space available, that it can be very difficult to execute the perfect blend of a high flow intercooler within such a close proximity.

Our research and development engineers started with a brief to fit our existing intercooler (FMMK7FMIC) that was for the MK7 platform, to our development VW MK8 Golf R. Upon installation, we then tried to establish if we could re-engineer the intercooler with an increased inlet and outlet size along with increasing the volumetric capacity to increase flow along with future proofing the design to work well with highly tuned stage 3 plus EA888 Gen 4 engines. Using a combination of scanning software and traditional measuring methods, the design was created. This was then fine-tuned by our flow dynamics simulations programs (CFD), and the end tanks were initially created by 3D printers. This enabled us to ensure the fit was perfect on the vehicle before any prototype castings or machined billet end tanks were produced ready for dyno testing.

Several baffle configurations were designed, and flow simulated to ensure the maximum performance was obtained to keep the core working at its optimum, along with ensuring all its cooling capabilities had been upheld, and that the total volume of the core internal is utilised for optimum performance. With an increase in inlet and outlet sizes, we then turned our attention to the design of our silicone hoses. With flow in mind, we have created a step within the hose so where the hose meets the hot and cold side of the inlet and outlet junctions the transition is seamless, this helps to lesson any disturbance to the airflow and prevent unwanted turbulence. To further aid with flow, the inlet and outlets have been increased to 76mm from the OEM size of 63mm which equates to a 45% increase in surface area.

The consideration of space and our clever design has led us to produce several intercooler cores with different fin configurations and internal capacities. Depending on the core design, testing results led us to choose a bar and plate design with over 83% more volume than the OEM intercooler, and with a frontal area increase of 10%.

Why do we test different cores?

Here at Forge Motorsport, when developing an intercooler, we will test several different cores for each application. For example, a bar and plate style core, a tube and fin style core along with different fin pitches and heights, as well as changing the internal fin pitches/shapes and density within the tube; thus enabling us to fine tune the amount of pressure drop the intercooler produces. Pressure drop is not always a bad thing, as our testing and research has proven on various projects. This is because the pressurized air velocity is being stalled by the pressure drop within the cooler thus allowing more time to cool the air within the cooler itself, as air passes through the non-pressurized face of the core, that is open to the atmosphere.

Too much pressure drop can of course have a problem on the higher performance engines as the intercooler reaches its maximum efficiency the turbo has to work a lot harder to force the air through the core. This in turn creates higher inlet air temps (IAT’s) due to the turbo creating more heat as it is over stressed and worked harder. No pressure drop can also prove to be inefficient as the cooler will not lower the charge temperature again resulting in higher inlet air temperatures.

Dyno Results Testing was completed using Performance Remap in Gloucester with their VTEC 4-wheel drive dynamometer. This was to ensure all our data has been achieved with results as accurately as possible by an independent tuner. As you can see from the dyno results below, peak power was increased from stock by 11bhp and 20nm of torque at 5500RPM with the Forge Motorsport performance intercooler installed. The best news is that there are significant torque gains throughout the rev range, meaning that the car power will pick up quicker and pull the whole way through to redline, including an impressive gain in BHP from 5000 RPM TO 6500 RPM. Gains on vehicles with re calibrated software and further hardware performance parts can be expected to be a lot higher due to the substantial drop in IATS when FMINT24 is installed. During our extensive testing, we let the car heat soak on the dyno until the radiator fans tripped on and off (which gives an inlet temperature of around 40°C). We then did a dyno pull from this point which gives a more consistent result and reflects real-world driving conditions more accurately. You can easily see the Forge intercooler cools much quicker and delivers a much greater drop in temperature compared to OEM.

After more than six pulls on the dyno we still had super safe IAT’s, and the Forge Motorsport intercooler gave results of 34°C at 6548 RPM giving a reduction of 58% over the factory’s intercooler intake temps from 58°C at 6508 RPM. These tests took place in relatively hot conditions with an ambient dyno cell temperature of 23°C proving how inefficient the stock intercooler is. In the summer months, the stock intercooler along with higher inlet air temperatures will have a hugely negative impact on the engine’s performance. In these conditions, the engine management will retard the ignition, resulting in a lower powered engine as temperatures rise and the ECU then pulls out the timing to stop detonation. On a mapped vehicle, the results will be even more detrimental and can lead to possible premature engine wear. If you use your car for fast road or have a high-performance tune in a hot climate, this product is essential.

Why do we try to decrease IAT's? (Inlet Air Temperature)

Temperature and volume of air supplied to your vehicles engine that is compressed by the turbo charger has a better effect on performance when cool as this is to provide the engine with more oxygen (denser air), thus improving the combustion in each cylinder. In addition, by regulating and reducing the air temperature, it also increases the reliability of an engine by keeping the AFRs (Air Fuel Ratios) in each cylinder at a safe level, which in turn, can increase an engines power due to the air being cooler. A bigger bang is then created within the cylinder, providing the correct amount of fuel is added. This can equate to an increase in BHP and torque.

The Forge Motorsport intercooler is a perfect performance enhancing product that fits directly to the OEM mounting points, making for an easy install, in a relatively short period of time. No cutting of any components is needed, making the installation reversible if the vehicle needs to be returned to stock at any time in the future. The core and end tanks are finished in our black textured anti corrosion coating that also aids with its thermal properties and keeps the product looking that bit stealthier or OEM+. The Forge Motorsport lifetime warranty on all hardware products shows the trust we have in the quality of our products while they are being enjoyed on your pride and joy.

Compatible Vehicles :

Audi

S3
- 2.0TSI (8Y Chassis)
- Sportback 2.0TSI (8Y Chassis)

Volkswagen

Golf
- MK8
  - Clubsport 45
  - GTI
  - R

CTS Turbo is proud to announce the release of the high-flow aluminum charge pipe for new generations of B58C engines in G-series BMW 3.0T engines and A90 Toyota Supra 3.0T The CTS Charge Pipe Kit offers more air flow than a factory pipe, OE-like fitment and peace of mind at any boost level. Our charge pipe kit will also improve the reliability of your B58C engine over the plastic stock part. You’ll notice an increase in throttle response and a decrease in turbo lag. It’s is a must for vehicles tuned to run higher than stock boost level. Product Details:

Precision CNC machined flanges for perfect fitment
T6061 Mandrel-Bent Aluminum Pipe
Robust Black Powdercoat Finish
4 ply Silicon Connectors
Stainless Steel Clamps and Hardware
2 x 1/8″ NPT Water-Methanol Bungs with plugs
Replaces BMW Part number 13718651066 (with 2 bolts on throttle body)

Make	Model	Year	Generation
BMW	740i	2019 - 2020	G11
BMW	745e	2019 - 2020	G11
BMW	M340i	2019 - 2021	G20
BMW	X7 40i	2019 - 2020	G07
BMW	Z4 M40i	2019 - 2022	G29
TOYOTA	SUPRA	2020	A90
TOYOTA	SUPRA	2021	A91
TOYOTA	SUPRA	2022

Racingline MQB VW Golf ‘R’/GTI 2.0 TSI OIL COOLER
FOR EA888 gen.3 & gen.4 ENGINES

The higher your power, the harder you drive, the more important it is to protect your oil with this Oil Cooler by RacingLine.

Racingline’s Oil Cooler kit is a complete ready to install package. An essential for any hard-driven Golf Mk7 GTI or ‘R’ running high power levels, hot climates or on the track. Of course, adding power generates more heat to disperse. Significantly increased oil temperatures mean only one thing: a decrease in the ability for your engine to stay properly lubricated. The new Racingline kit solves this problem: by adding in an additional air to oil cooler positioned right in the airflow in front of the car, oil temperatures are reduced by around 15-20ºc (of course this varies dependent on factors such as how the car is being driven, ambient temperatures and state of tune). Unlike many oil cooler kits, this keeps the factory Oil to Water cooler in position – effectively doubling up on your cooling. As oil passes through the new cooler first, that means less heat transfer back into your car’s water coolant circuit too.

WHY FIT AN OIL COOLER KIT?

Our Oil Cooler Kit is an essential fit for any hard-driven MQB or MQB 'Evo' 2.0 TSI car running high power levels or in hot climates. It's a complete ready to install package, using a clever sandwich plate design for straightforward and reliable installation.

Adding power to these 2.0 TSI engines generates more heat to disperse. Significantly increased oil temperatures means only one thing: a decrease in the ability for your engine to stay properly lubricated. At the same time, it's really important not to over-cool the oil; our 10-row kit is perfect.

Under hard driving, the stock oil cooler is easily overwhelmed. Failures start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade - losing its lubrication properties.

The RacingLine kit solves this problem: by adding in an additional air to oil cooler positioned right in the airflow in the front of the car, oil temperatures are reduced by around 15 - 20 degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune).

Our kit retains the factory oil to water cooler and adds to it with the front-mounted cooler - doubling up your cooling capability with less heat transfer into the water system.

As the oil moves away from the heat inside the engine, its temperature drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.

Supplied as a complete kit with every part ready for install.

What’s in the kit? – Oil Cooler mounting brackets – AN10 ‘210 Series’ Nylon braided feed and return lines – Billet CNC oil cooler sandwich plate – AN10 ’10-Row’ Oil Cooler Core – Billet oil filter housing with removable drop in filter – Fitting kit consisting of all necessary nuts, bolts, washers and rubber mountings

CONFIRMED APPLICATIONS

>	VW Golf 8 GTI	2020+
>	VW Golf 8 GTI Clubsport	2020+
>	VW Golf 8 R	2020+
>	VW Golf 7 & 7.5 GTI & Clubsport	2013-2020
>	VW Golf 7 & 7.5 R	2013-2020
>	VW Golf 7 & 7.5 1.8 TSI	2013-2020
>	VW Passat 2.0 TSI B8	2015+
>	VW Arteon 2.0 TSI	2017+
>	VW T-Roc R 2.0 TSI	2019+
>	VW Tiguan II 2.0 TSI	2016+
>	VW Jetta / GLI 7	2018+

>	Audi S3 8Y	2020+
>	Audi A3 2.0 TSI 8Y	2020+
>	Audi S3 8V	2013-2020
>	Audi A3 2.0 TSI / 1.8 TSI 8V	2013-2020
>	Audi TT 2.0 TSI 8S	2014+
>	Audi TTS 2.0 TSI 8S	2015+
>	Audi SQ2	2018+

Essential for fitting the RacingLine Oil Management kit on Golf 7R and Audi S3+

WHY FIT?

To fit our Oil Management Kit on Golf 7R and Audi S3 models, you will also need this Remote Washer Refill Kit.

Golf 7R and some early Audi S3 models have a different windscreen washer bottle fitment to the other MQB cars, with the reservoir located on the right of the vehicle compared to the majority of MQB models which have the washer bottle on the left.

For these cars with right-hand reservoirs, this is located where the Catch Can will be mounted. The kit replaces the top half of the factory washer bottle to still allow you to refill your washer fluid easily and neatly.

Included is a beautifully high-gloss filler cap which locates conveniently on the front panel using the bracket provided

Many owners prefer the appearance of our Remote Washer Refill and of course this can be fitted without having the RacingLine Oil Management kit installed.

CONFIRMED APPLICATIONS

>	VW Golf 7 & 7.5 GTI & Clubsport	2013-2020
>	VW Golf 7 & 7.5 R	2013-2020
>	VW Golf 7 & 7.5 1.8 TSI	2013-2020
>	VW Passat 2.0 TSI B8	2015+
>	VW Arteon 2.0 TSI	2017+
>	VW T-Roc R 2.0 TSI	2019+
>	VW Tiguan II 2.0 TSI	2016+
>	VW Jetta / GLI 7	2018+

>	Audi S3 8V	2013-2020
>	Audi A3 2.0 TSI / 1.8 TSI 8V	2013-2020
>	Audi TT 2.0 TSI 8S	2014+
>	Audi TTS 2.0 TSI 8S	2015+
>	Audi SQ2	2018+

Weight N/A N/A N/A N/A N/A N/A

Dimensions N/A N/A N/A N/A N/A N/A

Additional information

Brand	Forge Motorsport
Make	A4, A5, Audi, Golf GTI, Golf R, Q5, S1, S3, Volkswagen
Model Year	2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

Brand	CTS Turbo
Make	Golf GTI, Golf R, Volkswagen
Model Year	2022

Brand	Forge Motorsport
Make	Audi, Golf GTI, Golf R, S3, Volkswagen
Model Year	2020, 2021, 2022, 2023

Brand	CTS Turbo
Make	7 Series, BMW, M340i, Supra, Toyota, X7, Z4
Model Year	2019, 2020, 2021, 2022

Brand	Racingline
Make	A3, Audi, Golf GTI, Golf R, S3, SQ2, TT, TTS, Volkswagen
Model Year	2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

Brand	Racingline
Make	A3, Audi, Golf GTI, Golf R, S3, SQ2, TT, TTS, Volkswagen
Model Year	2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020