Uprated_Replacement_Front_Mounting_Intercooler_for_VW_Mk5_28790jpeg

Uprated_Replacement_Front_Mounting_Intercooler_for_VW_Mk5_38754jpeg

Brand	Forge Motorsport
Make	A3, Audi, Golf GTI, Golf R, S3, TT, TTS, Volkswagen
Model Year	2011, 2012, 2013, 2014

Forge Motorsport Uprated Front Mounting Intercooler for VW Mk5, Audi – FMMK5FMIC

Name: Forge Motorsport Uprated Front Mounting Intercooler for VW Mk5, Audi - FMMK5FMIC - VagLogic Auto Service Center
SKU: FMMK5FMIC
Price: 4050.00 AED
Availability: InStock

SKU: FMMK5FMIC

In Stock

د.إ4,050.00

Upon placing the order, we will get in touch with you to confirm the availability information.

For Instant Enquiry and More Details, Please Click Here

In Stock

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist

Low Prices

Price match guarantee

Guaranteed Fitment.

Always the correct part

In-House Experts.

We know our products

Wide Product Selection

Endless Possibilities

Category: Cooling Systems

Description

This uprated intercooler replaces the original front mounted intercooler. It can either be used on its own or in combination with our “Twintercooler” kit. The intercooler uses a 650x400x50mm Bar and Plate core to full effect. We conducted testing on standard vehicles and those running larger turbos at 400hp.

On the standard car the intercooler achieved +10hp, +29 ft/lbs and a reduction in the inlet temperature of over 20°C. Where this really comes into its own, is on tuned engines, where the gains are even more impressive. The inlet and outlet tubes are 63mm which means our twintercooler hoses will fit, with the bayonet coupler removed or for those installing without our twintercooler kit, we include our FMKT010 silicone hoses for an easy installation.

PLEASE NOTE: THE ORIGNAL O-RINGS/SEALS MUST BE RETAINED FOR USE ON THE FORGE HOSES

Compatible Vehicles :

Audi

A3
- 1.8 TFSi
- 2.0 FSiT
S3
- 2.0 FSiT (8P Chassis)
TT
- Mk2
  - 2.0
TTS
- Mk2 8J (2009-2014)

Volkswagen

EOS
Golf
- MK5
  - ED30
  - GTI
- MK6
  - ED35
  - GTI
  - R
Scirocco
- R
- 2.0 up to 2016

Additional information

Brand	Forge Motorsport
Make	A3, Audi, Golf GTI, Golf R, S3, TT, TTS, Volkswagen
Model Year	2011, 2012, 2013, 2014

Reviews

There are no reviews yet.

Be the first to review “Forge Motorsport Uprated Front Mounting Intercooler for VW Mk5, Audi – FMMK5FMIC”

Quick Comparison

Settings Forge Motorsport Uprated Front Mounting Intercooler for VW Mk5, Audi - FMMK5FMIC remove Snow Performance – Boost Cooler Stage 2E Power-Max - ProLine - SP10250PRO remove Forge Motorsport Intercooler for VW Golf MK8/Audi S3 - FMINT24 remove RACINGLINE 2.0 TSI DSG OIL COOLER - MQB DQ250 6-SPEED VWR29G7250 remove CTS TURBO MK7/7.5 THROTTLE PIPE (GTI/GOLF R/GOLF GTI/A3/S3/TT) 2015+ MQB MODELS -CTS-IT-280 remove Snow Performance - Boost Cooler Stage 2E Power-Max - SP10250 remove

Name Forge Motorsport Uprated Front Mounting Intercooler for VW Mk5, Audi - FMMK5FMIC remove Snow Performance – Boost Cooler Stage 2E Power-Max - ProLine - SP10250PRO remove Forge Motorsport Intercooler for VW Golf MK8/Audi S3 - FMINT24 remove RACINGLINE 2.0 TSI DSG OIL COOLER - MQB DQ250 6-SPEED VWR29G7250 remove CTS TURBO MK7/7.5 THROTTLE PIPE (GTI/GOLF R/GOLF GTI/A3/S3/TT) 2015+ MQB MODELS -CTS-IT-280 remove Snow Performance - Boost Cooler Stage 2E Power-Max - SP10250 remove

Image

SKU FMMK5FMIC SP10250PRO FMINT24 VWR29G7250 CTS-IT-280 SP10250

Rating

Price د.إ4,050.00 د.إ2,600.00 – د.إ3,900.00 د.إ4,190.00 د.إ3,200.00 د.إ950.00 د.إ2,200.00

Stock

In Stock

Availability In Stock In Stock In Stock In Stock In Stock In Stock

Add to cart

Add to basket

Select options

Add to basket

Description Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here

Content

This uprated intercooler replaces the original front mounted intercooler. It can either be used on its own or in combination with our "Twintercooler" kit. The intercooler uses a 650x400x50mm Bar and Plate core to full effect. We conducted testing on standard vehicles and those running larger turbos at 400hp.

Compatible Vehicles :

Audi

A3
- 1.8 TFSi
- 2.0 FSiT
S3
- 2.0 FSiT (8P Chassis)
TT
- Mk2
  - 2.0
TTS
- Mk2 8J (2009-2014)

Volkswagen

EOS
Golf
- MK5
  - ED30
  - GTI
- MK6
  - ED35
  - GTI
  - R
Scirocco
- R
- 2.0 up to 2016

Boost Cooler water injection can achieve a power increase of up to 10-25% in turbo and supercharged engines without thermally overloading the engine. The charge air temperature is lowered by up to 60°C, the combustion chamber is cooled and the thermal load on already tuned vehicles is effectively reduced. Water or water/alcohol (methanol or ethanol) is injected at high pressure into the hot charge air in a finely atomised form as soon as the desired starting charge pressure is reached. The evaporating liquid achieves an extremely effective charge air and intercooling, which, among other things, prevents uncontrolled combustion ("knocking"). The effect is demonstrably comparable with 116 octane racing petrol. The Boost Cooler is unsurpassed in atomisation! The liquid is swirled inside the Hyper-Sonic atomiser nozzle at supersonic speed before being forced through the Venturi orifice. With the included Dual Stage Upgrade, 2 atomiser nozzles are used to inject as early as possible with the primary nozzle and to achieve maximum cooling and performance in peak loads with the switched-on 2nd nozzle.

Boost pressure-dependent injection control - Optimal for all centrifugal compressors (Procharger, Vortech) and large turbochargers
ProLine Version: High-quality steel braided lines and connection technology
Higher boost pressure and/or more aggressive ignition without knocking combustion - additional power up to 25% possible.
Dual Stage technology for maximum efficiency in all load ranges
Octane booster, 116 octane racing fuel performance possible with regular gas
Earlier ignition timing or compression without knocking combustion. Up to 25% more power possible.
More power and torque with simultaneous reduction of the thermal load on engines that have already been modified, e.g. by chip tuning, NOS or LPG/autogas.
Effective intake air cooling, compensation of power losses at higher outside temperatures
Reduction of the specific fuel consumption.
Deposit-free combustion chamber and intake tract, without formation of oil carbon.
Easy installation

FMINT24 is a performance intercooler for the MQB platforms with the EA888 GEN4 Engine. Produced, designed, and tested, at our headquarters in Gloucester UK. Throughout the development process we have strived to improve the efficiency and performance of the EA888 GEN4 engine. Our project brief was to develop an intercooler that utilised all of the available space in the original position of the OEM intercooler, and to ensure the inlet air temperature is reduced, without any negative effects on the boost pressure or engine and transmission cooling. In the MQB chassis the intercooler housing is particularly restricted and confined to a small amount of space, due to it not only housing the intercooler, but also the radiator and air conditioning condenser. The front panel in theory is a sandwich pack that houses the auxiliary cooling components. This means in order to increase the size of the intercooler without paying detriment to the performance of the surrounding items, and with also having very little extra space available, that it can be very difficult to execute the perfect blend of a high flow intercooler within such a close proximity.

Our research and development engineers started with a brief to fit our existing intercooler (FMMK7FMIC) that was for the MK7 platform, to our development VW MK8 Golf R. Upon installation, we then tried to establish if we could re-engineer the intercooler with an increased inlet and outlet size along with increasing the volumetric capacity to increase flow along with future proofing the design to work well with highly tuned stage 3 plus EA888 Gen 4 engines. Using a combination of scanning software and traditional measuring methods, the design was created. This was then fine-tuned by our flow dynamics simulations programs (CFD), and the end tanks were initially created by 3D printers. This enabled us to ensure the fit was perfect on the vehicle before any prototype castings or machined billet end tanks were produced ready for dyno testing.

Several baffle configurations were designed, and flow simulated to ensure the maximum performance was obtained to keep the core working at its optimum, along with ensuring all its cooling capabilities had been upheld, and that the total volume of the core internal is utilised for optimum performance. With an increase in inlet and outlet sizes, we then turned our attention to the design of our silicone hoses. With flow in mind, we have created a step within the hose so where the hose meets the hot and cold side of the inlet and outlet junctions the transition is seamless, this helps to lesson any disturbance to the airflow and prevent unwanted turbulence. To further aid with flow, the inlet and outlets have been increased to 76mm from the OEM size of 63mm which equates to a 45% increase in surface area.

The consideration of space and our clever design has led us to produce several intercooler cores with different fin configurations and internal capacities. Depending on the core design, testing results led us to choose a bar and plate design with over 83% more volume than the OEM intercooler, and with a frontal area increase of 10%.

Why do we test different cores?

Here at Forge Motorsport, when developing an intercooler, we will test several different cores for each application. For example, a bar and plate style core, a tube and fin style core along with different fin pitches and heights, as well as changing the internal fin pitches/shapes and density within the tube; thus enabling us to fine tune the amount of pressure drop the intercooler produces. Pressure drop is not always a bad thing, as our testing and research has proven on various projects. This is because the pressurized air velocity is being stalled by the pressure drop within the cooler thus allowing more time to cool the air within the cooler itself, as air passes through the non-pressurized face of the core, that is open to the atmosphere.

Too much pressure drop can of course have a problem on the higher performance engines as the intercooler reaches its maximum efficiency the turbo has to work a lot harder to force the air through the core. This in turn creates higher inlet air temps (IAT’s) due to the turbo creating more heat as it is over stressed and worked harder. No pressure drop can also prove to be inefficient as the cooler will not lower the charge temperature again resulting in higher inlet air temperatures.

Dyno Results Testing was completed using Performance Remap in Gloucester with their VTEC 4-wheel drive dynamometer. This was to ensure all our data has been achieved with results as accurately as possible by an independent tuner. As you can see from the dyno results below, peak power was increased from stock by 11bhp and 20nm of torque at 5500RPM with the Forge Motorsport performance intercooler installed. The best news is that there are significant torque gains throughout the rev range, meaning that the car power will pick up quicker and pull the whole way through to redline, including an impressive gain in BHP from 5000 RPM TO 6500 RPM. Gains on vehicles with re calibrated software and further hardware performance parts can be expected to be a lot higher due to the substantial drop in IATS when FMINT24 is installed. During our extensive testing, we let the car heat soak on the dyno until the radiator fans tripped on and off (which gives an inlet temperature of around 40°C). We then did a dyno pull from this point which gives a more consistent result and reflects real-world driving conditions more accurately. You can easily see the Forge intercooler cools much quicker and delivers a much greater drop in temperature compared to OEM.

After more than six pulls on the dyno we still had super safe IAT’s, and the Forge Motorsport intercooler gave results of 34°C at 6548 RPM giving a reduction of 58% over the factory’s intercooler intake temps from 58°C at 6508 RPM. These tests took place in relatively hot conditions with an ambient dyno cell temperature of 23°C proving how inefficient the stock intercooler is. In the summer months, the stock intercooler along with higher inlet air temperatures will have a hugely negative impact on the engine’s performance. In these conditions, the engine management will retard the ignition, resulting in a lower powered engine as temperatures rise and the ECU then pulls out the timing to stop detonation. On a mapped vehicle, the results will be even more detrimental and can lead to possible premature engine wear. If you use your car for fast road or have a high-performance tune in a hot climate, this product is essential.

Why do we try to decrease IAT's? (Inlet Air Temperature)

Temperature and volume of air supplied to your vehicles engine that is compressed by the turbo charger has a better effect on performance when cool as this is to provide the engine with more oxygen (denser air), thus improving the combustion in each cylinder. In addition, by regulating and reducing the air temperature, it also increases the reliability of an engine by keeping the AFRs (Air Fuel Ratios) in each cylinder at a safe level, which in turn, can increase an engines power due to the air being cooler. A bigger bang is then created within the cylinder, providing the correct amount of fuel is added. This can equate to an increase in BHP and torque.

The Forge Motorsport intercooler is a perfect performance enhancing product that fits directly to the OEM mounting points, making for an easy install, in a relatively short period of time. No cutting of any components is needed, making the installation reversible if the vehicle needs to be returned to stock at any time in the future. The core and end tanks are finished in our black textured anti corrosion coating that also aids with its thermal properties and keeps the product looking that bit stealthier or OEM+. The Forge Motorsport lifetime warranty on all hardware products shows the trust we have in the quality of our products while they are being enjoyed on your pride and joy.

Compatible Vehicles :

Audi

S3
- 2.0TSI (8Y Chassis)
- Sportback 2.0TSI (8Y Chassis)

Volkswagen

Golf
- MK8
  - Clubsport 45
  - GTI
  - R

Racingline Performance DSG Oil Cooler System for MQB DQ250 (6 Speed Only) - VWR29G7250

Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade – losing its lubrication properties.

When this happens, the DSG will protect itself and begin to lower the torque, increase shift times and in extreme circumstances even loose gear selection.
The RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15 – 20 degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune).
The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler – doubling up your cooling capability when it’s needed with less heat transfer into the water system.
Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.

What’s included in the kit

Oil cooler mounting brackets
AN10 210 series Nylon braided feed and return line
Billet CNC thermostatic adaptor block
Replacement, low-profile oil/water cooler
AN10 10-row oil/air cooler core
Fitting kit containing all necessary nuts, bolts, washers and rubber mounting bobbins

The kit for all MQB cars comes supplied with two bracket kits. One kit is for Audi S3 models, the other is for all Golf 7 and other MQB models. Mounting for the bracket set requires drilling bolt holes through the front crash bar. Part number: VWR29G7250

Why fit a DSG Cooler Kit?

Our unique DSG Oil Cooler Kit is an essential fit for any hard-driven MQB 2.0 TSI car running high power levels or in hot climates. It’s a complete ready to install package, using a clever sandwich plate design for straightforward and completely reliable installation.

Transferring more power and torque through the DSG gearbox generates ever more heat to dissipate. Significantly increased oil temperatures means only one thing: a decrease in the ability for your DSG box to stay properly cooled, eventually causing power drop and gear selection issues.

Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade – losing its lubrication properties.
When this happens, the DSG will protect itself and begin to lower the torque, increase shift times and in extreme circumstances even loose gear selection.
The RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15 – 20 degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune).
The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler – doubling up your cooling capability when it’s needed with less heat transfer into the water system.
Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.

CONFIRMED APPLICATIONS

VWR29G7250 / DQ250 6-SPEED GEARBOXES ONLY *

*not for US-spec DQ250 with Secondary Air Intake (SAI) system

>	VW Golf 7 & 7.5 GTI & Clubsport	2013-2020
>	VW Golf 7 & 7.5 R	2013-2020
>	VW Golf 7 & 7.5 1.8 TSI	2013-2020
>	VW Passat 2.0 TSI B8	2015+
>	VW Arteon 2.0 TSI	2017+
>	VW T-Roc R 2.0 TSI	2019+
>	VW Tiguan II 2.0 TSI	2016+
>	VW Jetta / GLI 7	2018+

>	Audi S3 8V	2013-2020
>	Audi A3 2.0 TSI / 1.8 TSI 8V	2013-2020
>	Audi TT 2.0 TSI 8S	2014+
>	Audi TTS 2.0 TSI 8S	2015+
>	Audi SQ2	2018+

CTS Turbo is pleased to offer the ultimate high flow throttle pipe kit for the MQB model range vehicles. The OEM Charge pipping leaves something to be desired with inefficient bends, and blockages not optimized for performance. The CTS Turbo throttle pipe increases the entire diameter to 2.5″ allowing for increased flow and greater performance. The integrated water methanol bung (1/8″ NPT) allows for simple and straight forward installation of kits from Snow Performance. All of the components included in the CTS throttle pipe kit work flawlessly together to provide increased efficiency, horsepower, and torque throughout the entire power band and an aggressive race inspired sound. Product Details:

Mandrel bent aluminum piping with durable black powder coating
CNC machined MAP flange
4 Ply silicon connectors with stainless steel clamps
Integrated water methanol bung with plug
Stainless steel clamps
Compatible with factory and aftermarket intercoolers

Boost pressure-dependent injection control - Optimal for all centrifugal compressors (Procharger, Vortech) and large turbochargers
Higher boost pressure and/or more aggressive ignition without knocking combustion - additional power up to 25% possible.
Dual Stage technology for maximum efficiency in all load ranges
Octane booster, 116 octane racing fuel performance possible with regular gas
Earlier ignition timing or compression without knocking combustion. Up to 25% more power possible.
More power and torque with simultaneous reduction of the thermal load on engines that have already been modified, e.g. by chip tuning, NOS or LPG/autogas.
Effective intake air cooling, compensation of power losses at higher outside temperatures
Reduction of the specific fuel consumption.
Deposit-free combustion chamber and intake tract, without formation of oil carbon.
Easy installation

Weight N/A N/A N/A N/A N/A N/A

Dimensions N/A N/A N/A N/A N/A N/A

Additional information

Brand	Forge Motorsport
Make	A3, Audi, Golf GTI, Golf R, S3, TT, TTS, Volkswagen
Model Year	2011, 2012, 2013, 2014

Brand	Snow Performance
Make	AMG C63, AMG E63, AMG G63, AMG GT/GTS/GTR/GTC, AMG S63, Audi, Golf GTI, Golf R, Mercedes-Benz, R8, RS3, RS4, RS5, RS6, RS7, S3, S4, S5, S6, S7, S8, Supra, Toyota, Volkswagen
Model Year	2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Option	Satge 2 Full Methanol Kit, Stage 2 Full Methanol Kit with Fittings for AMG Models

Brand	Forge Motorsport
Make	Audi, Golf GTI, Golf R, S3, Volkswagen
Model Year	2020, 2021, 2022, 2023

Brand	Racingline
Make	A3, Audi, Golf GTI, Golf R, S3, SQ2, TT, TTS, Volkswagen
Model Year	2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020

Brand	CTS Turbo
Make	Audi, Golf GTI, Golf R, S3, Volkswagen
Model Year	2015, 2016, 2017, 2018, 2019

Brand	Snow Performance
Make	AMG C63, AMG E63, AMG G63, AMG GT/GTS/GTR/GTC, AMG S63, Audi, Golf GTI, Golf R, Mercedes-Benz, R8, RS3, RS4, RS5, RS6, RS7, S3, S4, S5, S6, S7, S8, Supra, Toyota, Volkswagen
Model Year	2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023