FTP Motorsport BMW G20 B58 3.0T charge pipe ( A90 supra) B58 Gen2 – FTPSG71444

SKU: FTPSG71444
In Stock

د.إ1,200.00

Upon placing the order, we will get in touch with you to confirm the availability information.

For Instant Enquiry and More Details, Please Click Here

In Stock
Add to Wishlist
Add to Wishlist

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist
Low Prices

Price match guarantee

Guaranteed Fitment.

Always the correct part

In-House Experts.

We know our products

Wide Product Selection

Endless Possibilities

Category:

Description

Our charge pipe kit replaces the weak and inefficient factory plastic charge pipe, which can become brittle and fail under increased boost pressure.
Made of high-quality aluminum
Direct bolt-on replacement for easy installation
increased boost pressure and improve throttle response

 Features

*Increased Flow

*Direct OEM Replacement

*Caliber increase

*3-Ply Silicon Couplers

* bung for water injection

*never blow up again

For maximum effect, The FTP Charge Pipe both increases flow and improves the reliability of your

B58 engine BMW.

The aluminum pipe replaces the brittle factory plastic pipe which can fail under increased boost pressure.

The increased piping size helps to reduce turbulence and maximize flow into the engine.

 

OEM Part 13718651066

FTP parts number sg71444 wasPart was found on the following vehicles:

3′ G20   M340i. (01/2018 —  2021)
7′ G11 LCI   740i  (01/2018 — 2021)
7′ G12 LCI   740Li (01/2018 — 2021)
X5 G05   M40i (10/2017 — 2021)

X6 G06 M40i ( 2018 ~ 2021)

X7 G07   M40i (11/2017 — 2021 )
Z4 G29   (10/2017 — 2021 )

Toyota Toyota GR Supra A90 ( 2019- now )

Additional information

Brand

FTP Motorsport

Make

3 Series, 7 Series, BMW, Supra, Toyota, X5, X6, X7, Z4

Model Year

2017, 2018, 2019, 2020, 2021, 2022, 2023

Reviews

There are no reviews yet.

Be the first to review “FTP Motorsport BMW G20 B58 3.0T charge pipe ( A90 supra) B58 Gen2 – FTPSG71444”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsFTP Motorsport BMW G20 B58 3.0T charge pipe ( A90 supra) B58 Gen2 - FTPSG71444 removeTHE TURBO SYSTEM TTE700 EVO EA855 2.5 TFSI UPGRADE TURBOCHARGER -SW10032.1 removeCTS TURBO 1.8T/2.0T MQB GEN3 HIGH-FLOW TURBO INLET PIPE -CTS-IT-285 removeCTS TURBO MQB GEN3 1.8T/2.0T AND TFSI GEN2 1.8T/2.0T TURBO MUFFLER DELETE removeCTS TURBO B9 AUDI A4, A5, ALLROAD 1.8T/2.0T CHARGE PIPE SET (TURBO OUTLET AND THROTTLE PIPE -CTS-IT-291 removeCTS TURBO 8V.2 RS3/ 8S TTRS 2.5T EVO THROTTLE PIPE -CTS-IT-258 remove
NameFTP Motorsport BMW G20 B58 3.0T charge pipe ( A90 supra) B58 Gen2 - FTPSG71444 removeTHE TURBO SYSTEM TTE700 EVO EA855 2.5 TFSI UPGRADE TURBOCHARGER -SW10032.1 removeCTS TURBO 1.8T/2.0T MQB GEN3 HIGH-FLOW TURBO INLET PIPE -CTS-IT-285 removeCTS TURBO MQB GEN3 1.8T/2.0T AND TFSI GEN2 1.8T/2.0T TURBO MUFFLER DELETE removeCTS TURBO B9 AUDI A4, A5, ALLROAD 1.8T/2.0T CHARGE PIPE SET (TURBO OUTLET AND THROTTLE PIPE -CTS-IT-291 removeCTS TURBO 8V.2 RS3/ 8S TTRS 2.5T EVO THROTTLE PIPE -CTS-IT-258 remove
Image
SKUFTPSG71444SW10032.1CTS-IT-285CTS-HW-0199CTS-IT-291CTS-IT-258
Rating
Priceد.إ1,200.00د.إ18,600.00د.إ600.00د.إ450.00د.إ970.00د.إ880.00
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

DescriptionUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here
ContentOur charge pipe kit replaces the weak and inefficient factory plastic charge pipe, which can become brittle and fail under increased boost pressure. Made of high-quality aluminum Direct bolt-on replacement for easy installation increased boost pressure and improve throttle response

 Features

*Increased Flow *Direct OEM Replacement *Caliber increase *3-Ply Silicon Couplers * bung for water injection *never blow up again For maximum effect, The FTP Charge Pipe both increases flow and improves the reliability of your B58 engine BMW. The aluminum pipe replaces the brittle factory plastic pipe which can fail under increased boost pressure. The increased piping size helps to reduce turbulence and maximize flow into the engine.   OEM Part 13718651066 FTP parts number sg71444 wasPart was found on the following vehicles: 3' G20   M340i. (01/2018 —  2021) 7' G11 LCI   740i  (01/2018 — 2021) 7' G12 LCI   740Li (01/2018 — 2021) X5 G05   M40i (10/2017 — 2021) X6 G06 M40i ( 2018 ~ 2021) X7 G07   M40i (11/2017 — 2021 ) Z4 G29   (10/2017 — 2021 ) Toyota Toyota GR Supra A90 ( 2019- now )

TTE700 EVO UPGRADE TURBOCHARGER FOR RS3 8V.2 & 8Y / TTRS 8S DAZA, DNWA, DNWC

A TTE700 Is an original RS3 8V.2/TTRS 8S turbocharger that we the THETURBOENGINEERS Rework to make amazing performance yet still plug & play fitting with an upgrade inlet. To make a TTE700 the compressor wheel is exchanged for a TTE milled aluminum wheel with state-of-the-art geometry, 7+7 blade, and of a much larger size, so producing extra power. Equally, we change the original exhaust turbine for a far larger but very lightweight 9 blade TTE designed the turbine for lower exhaust gas backpressure giving greater performance. We also fitted a TTE motorsport upgrade bearing system for durability. Boost response as always is focused on when we were designing this unit and it does not disappoint.

If ordering new, we use the latest generation of BorgWarner original turbochargers with the latest spec Audi thermal heat isolation shielding on the exhaust manifold & turbine housing to lower engine bay temperatures and ensure the best performance and safety.

Please note if you send an older generation turbo, without the original AUDI thermal shielding for the "upgrade" process, we will rework your turbo and return without the shielding, unless you buy the extra thermal Isolation process.  Depending on stock availability we may substitute TTE thermal shielding and give AUDI original thermal shielding instead. 

Equilibrium

Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled and then the CHRA are dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with a serial numbered balance test result document.

Features :  

  • TTE Billet Milled 7+7 Blade, 63mm Inlet compressor
  • TTE 9 Blade High-flow Low-mass turbine
  • TTE Upgrade bearing pack
  • Genuine BorgWarner Turbocharger as the base part
  • Genuine BorgWarner actuator
  • Thermally shielded exhaust manifold and housing
  • CNC Optimized Compressor Cover Machining Clearances
  • Plug and Play Installation
  • 600+ depending on fuel (link here for required upgrade injectors)
  • Single parts finely balanced then components assembled and core high-speed VSR balanced
  • Supplied with a balance test result document
  • Software recalibration is required
  • Proven TheTurboEngineers quality
  • Made in Germany

From time to time when buying new, we might supply the upgrade TTE thermal isolation free of charge if AUDI OEM heat shielded units are not avalible.

 
Make Model Submodel Engine
Audi 8S TTRS Quattro 2.5T
Audi RS3 8V (2018+) 2.5T
 
CTS Turbo is proud to announce our High Flow Turbo Inlet.  We were the first manufacturer to offer these; and now they are made from cast aluminum! This part is compatible with any MQB vehicle, regardless of engine displacement or factory turbocharger size. It is compatible with any intake system, be it factory stock or aftermarket. Simple installation takes 10 minutes and can be done using basic hand tools. Don’t let your free-flowing intake taper into a small restrictive factory inlet. Upgrade to CTS Turbo High Flow Turbo Inlet and make sure you get the most airflow to your turbo! Product features:
  • Large inside diameter for extremely high flow
  • Cast aluminum with CNC machined flanges
  • Compatible with any intake system, including stock
  • Durable aluminum construction, will not break like factory plastic part
  • Simple installation
  • Includes new o-ring
  • Faster turbo spool, more airflow, improved turbo sound!
Fitment is for MK7, MK7.5 and 8V, 8V.2 cars (ROW vehicles may have different years):
  • 2015-2020 Audi A3/S3/TT/TT-S  (including facelift models)
  • 2018+ Audi SQ2
  • 2015-2020 VW Golf, Sportwagen, Alltrack, GTI, Golf R, GTI Clubsport, GTI Rabbit Edition,  ED40 (including facelift models)
  • 2019+ VW Jetta GLI 2.0T
  • 2018+ VW Tiguan
  • 2018-2020 VW Arteon
  • 2018+ Atlas 2.0T
  • Skoda Octavia, Octavia VRS (MK3)
  • Seat Leon, Cupra (MK3)
  • Skoda Superb (B8)
Make Model Year Generation
AUDI A3 2015 - 2020 8V
AUDI S3 2015 - 2020 8V
AUDI TT 2016 - 2020 8S
VW ARTEON 2017 - 2019 MK1
VW ATLAS 2018 - 2019 MK1
VW GOLF 2015 - 2020 MK7/7.5
VW GOLF R 2015 - 2020 MK7/7.5
VW GTI 2015 - 2020 MK7/7.5
VW JETTA GLI 2019 - 2021 MK7
VW TIGUAN 2018 - 2020 MK2
CTS Turbo is proud to release our high flow Turbo Muffler delete for 1.8T and 2.0T engines equipped with IHI Turbochargers (see application guide below). This is another original product brought to you by our engineers and in-house fabrication team. The CTS Turbo Muffler delete is a one-piece design, made using precision CAD tools and is CNC machining in house. Cast from 6061 aircraft grade aluminum. Our Turbo Muffler delete replaces the restrictive, power robbing OEM Turbo Muffler, which is designed to reduce turbocharger harmonic noise. Our kit installs in 30 minutes with standard hand tools and fits perfectly. For those of you that want optimal power and boost response, this TMD is your answer. Features:
  • Original design, often replicated by other companies
  • Eliminates factory turbo outlet restrictor for smooth air flow
  • Perfect fit, one-piece cast aluminum construction
  • Designed and made in Canada
  • Large viton o-ring included (you can choose to also use factory o-ring in addition)
Fitment (ROW vehicles may have different years):
  • 2010-2019 Audi A4, A5, Allroad 1.8T/2.0T
  • 2010-2019 Audi A6/A7 2.0T
  • 2015+ Audi A3/S1/S3/TT/TT-S  (including facelift models)
  • 2018+ Audi SQ2
  • 2010-2019 Audi Q5 2.0t
  • 2015-2020 Golf, Sportwagen, Alltrack, GTI, Golf R, GTI Clubsport, GTI Rabbit Edition,  ED40 (including facelift models)
  • 2019+ Jetta GLI 2.0T
  • 2017-2019 Passat (B8)
  • 2018-2019 Tiguan (not compatible with 2020+ models, split year is in 2020 – please check on your vehicle before ordering)
  • 2018+ Arteon
  • Skoda Octavia, Octavia VRS (MK3)
  • Seat Leon, Cupra (MK3)
  • Skoda Superb (B8)
Make Model Year Generation
AUDI A3 2015 - 2019 8V
AUDI A4 2010 - 2016 B8/8.5
AUDI A4 2017 - 2019 B9
AUDI A5 2009 - 2016 B8/8.5
AUDI A5 2017 - 2019 B9
AUDI A5 2021 B9
AUDI A6 2012 - 2018 C7
AUDI A7 2012 - 2018 C7
AUDI ALLROAD 2018 - 2019 B9
AUDI Q5 2010 - 2017 B8/8.5
AUDI S3 2015 - 2020 8V
AUDI TT 2015 - 2021 8S
AUDI TTS 2015 - 2021 8S
VW ALLTRACK 2015 - 2019 MK7/7.5
VW ARTEON 2018 - 2021 MK1
VW GOLF 2015 - 2021 MK7/7.5
VW GOLF R 2015 - 2020 MK7/7.5
VW GTI 2015 - 2020 MK7/7.5
VW JETTA GLI 2019 - 2021 MK7
VW TIGUAN 2018 - 2019 MK2
At CTS Turbo we are proud to announce our new intercooler charge pipes for the B9 Audi A4, A5, AllRoad 1.8T/2.0T. The OEM charge piping uses a rubber hose as turbo outlet connection and plastic cold-side pipes with a flow-impeding “resonator”. Factory piping is not optimized for performance; so we had to step in and make our charge pipe set of 2.5″ aluminum mandrel-bent tube. Our parts replace soft turbo outlet hose and the small resonated plastic throttle body pipe. All of the components included in the CTS charge pipe set work flawlessly together to provide increased efficiency, horsepower and torque throughout the entire power-band. By removing the restricting resonator on the cold-side piping, you can enjoy a slight increase in turbo sound! Product Details:
  • 2.5″ Mandrel Bent Aluminium Pipe Set
  • 1/8″ NPT Bung for Water/Meth injetion (with plug)
  • Robust Black Powdercoat Finish
  • 4 ply silicon connector
  • Stainless Steel Clamps
  • Laser-etched CTS Turbo Logo
  • Necessary Installation hardware
  • Compatible with factory or upgraded intercoolers
  • Compatible with factory or upgraded turbo outlet fitting (Turbo Muffler Delete)
Fitment:
  • 2017+ B9 Audi A4 1.8T/2.0T (FWD and Quattro)
  • 2017+ B9 Audi A5 1.8T/2.0T (FWD and Quattro)
  • 2017+ B9 Audi AllRoad
Make Model Year Generation
AUDI A4 2017 - 2021 B9
AUDI A5 2017 - 2021 B9
 
At CTS Turbo we are proud to announce our new throttle pipe for the 8V.2 RS3/8S TTRS 2.5T EVO.  The OEM charge piping leaves something to be desired with inefficient bends not optimized for performance.  The CTS Turbo throttle pipe allows for increased flow and greater performance.  The integrated water methanol bungs allow for simple and straightforward installation of kits from Snow Performance.  All of the components included in the CTS throttle pipe kit work flawlessly together to provide increased efficiency, power and torque throughout the entire power band and an aggressive race inspired sound. Product Details: – For 8V.2 RS3/ 8S TTRS 2.5T EVO
– CNC bent 2.5″ aluminum piping
– CNC machined MAP flange
– Integrated water methanol bungs with plugs
– Robust black powder coating
– CNC machined mounting flange
– Coveted CTS Turbo logo
Make Model Year Generation
AUDI RS3 2015 - 2020 8V
AUDI TTRS 2016 - 2021 8S
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Brand

FTP Motorsport

Make

3 Series, 7 Series, BMW, Supra, Toyota, X5, X6, X7, Z4

Model Year

2017, 2018, 2019, 2020, 2021, 2022, 2023

Brand

The Turbo Engineer

Make

Audi, RS3, TTRS

Model Year

2015, 2016, 2017, 2018, 2019, 2020

Brand

CTS Turbo

Make

A3, Audi, Golf GTI, Golf R, S3, TT, Volkswagen

Model Year

2015, 2016, 2017, 2018, 2019, 2020, 2021

Brand

CTS Turbo

Make

A3, A4, A5, A6, A7, Audi, Golf GTI, Golf R, Q5, S3, TT, TTS, Volkswagen

Model Year

2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021

Brand

CTS Turbo

Make

A4, A5, Audi

Model Year

2017, 2018, 2019, 2020, 2021

Brand

CTS Turbo

Make

Audi, RS3, TTRS

Model Year

2015, 2016, 2017, 2018, 2019, 2020, 2021