Brand

Forge Motorsport
Make

A3, Audi, Golf GTI, Golf R, Q2, S3, TT, TTS, Volkswagen
Model Year

2014, 2015, 2016, 2017, 2018, 2019

Forge Motorsport High Flow Discharge Pipe for 1.8T and 2.0T VAG Engines – FMMK7DP

SKU: FMMK7DP
In Stock

د.إ1,050.00

Upon placing the order, we will get in touch with you to confirm the availability information.

For Instant Enquiry and More Details, Please Click Here

In Stock
Add to Wishlist
Add to Wishlist

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist
Low Prices

Price match guarantee

Guaranteed Fitment.

Always the correct part

In-House Experts.

We know our products

Wide Product Selection

Endless Possibilities

Category:

Description

Designed as a direct replacement for the OEM plastic discharge pipe (Part No. 5Q0145840) used on 1.8T and 2.0T engines found in various VW, Audi, Seat and Skoda models.

Full mandrel bent single piece hard pipe with larger bore size for increased flow. This ensures high amounts of air are discharged from the turbo charger and therefore releasing the full potential of your engines capabilities. Unlike the OEM discharge pipe that is prone to failure from increased boost or many heat cycles, the Forge Motorsport high flow discharge pipe will not crack or fail – ever. This is backed up by our no quibble Lifetime warranty.

 

 

 

Supplied in black powder coated finish for that OEM look with a choice of hose colours red, blue, or black to compliment the look of your engine bay. No modifications to original equipment are necessary to install this part. This will fit with the stock turbo muffler or with the Forge Motorsport Muffler Delete FMMD2 which will further enhance the benefits of this discharge pipe.

 

In the box:
Hard pipe
Silicone Hose
Hose Clamps

 

*NOT COMPATIBLE WITH 7-SPEED DSG MODELS

Compatible Vehicles :

 

Audi
  • A3
    • 1.8/2.0 TSI 2015 Onwards
  • Q2
    • 2.0 2017-2021
  • S3
    • 2.0 TSI (8V Chassis)
  • TT
    • Mk3
      • 2.0 TSI 2015 Onwards
  • TTS
    • Mk3 8S (2014-)
Volkswagen
  • Arteon
    • 2.0 TSI
  • Golf
    • MK7
      • 1.8 TFSI
      • GTI
      • GTI Clubsport ED40
      • R
    • MK7.5
      • GTI
      • R
  • T-Roc
    • 2.0 2018-2021
  • Touran
    • 1.8 TFSI

 

Additional information

Brand

Forge Motorsport
Make

A3, Audi, Golf GTI, Golf R, Q2, S3, TT, TTS, Volkswagen
Model Year

2014, 2015, 2016, 2017, 2018, 2019

Reviews

There are no reviews yet.

Be the first to review “Forge Motorsport High Flow Discharge Pipe for 1.8T and 2.0T VAG Engines – FMMK7DP”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsForge Motorsport High Flow Discharge Pipe for 1.8T and 2.0T VAG Engines - FMMK7DP removeForge Motorsport Intercooler for VW Golf MK8/Audi S3 - FMINT24 removeCTS TURBO 4″ TURBO INLET PIPE FOR 8V AUDI RS3/8S AUDI TT-RS -CTS-HW-360 removeCTS TURBO VW MQB MK8 GTI/GOLF R DIRECT FIT INTERCOOLER -CTS-20T-MK8-DF removeCTS TURBO HIGH-PERFORMANCE RADIATOR FOR VW/AUDI MK7/8V/8S MQB (EA888.3) -CTS-HX-007 removeRACINGLINE 2.0 TSI DSG OIL COOLER - MQB DQ250 6-SPEED VWR29G7250 remove
NameForge Motorsport High Flow Discharge Pipe for 1.8T and 2.0T VAG Engines - FMMK7DP removeForge Motorsport Intercooler for VW Golf MK8/Audi S3 - FMINT24 removeCTS TURBO 4″ TURBO INLET PIPE FOR 8V AUDI RS3/8S AUDI TT-RS -CTS-HW-360 removeCTS TURBO VW MQB MK8 GTI/GOLF R DIRECT FIT INTERCOOLER -CTS-20T-MK8-DF removeCTS TURBO HIGH-PERFORMANCE RADIATOR FOR VW/AUDI MK7/8V/8S MQB (EA888.3) -CTS-HX-007 removeRACINGLINE 2.0 TSI DSG OIL COOLER - MQB DQ250 6-SPEED VWR29G7250 remove
Image
SKUFMMK7DPFMINT24CTS-HW-360CTS-20T-MK8-DFCTS-HX-007VWR29G7250
Rating
Priceد.إ1,050.00د.إ4,190.00د.إ1,380.00د.إ3,900.00د.إ2,400.00د.إ3,200.00
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

DescriptionUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here
ContentDesigned as a direct replacement for the OEM plastic discharge pipe (Part No. 5Q0145840) used on 1.8T and 2.0T engines found in various VW, Audi, Seat and Skoda models. Full mandrel bent single piece hard pipe with larger bore size for increased flow. This ensures high amounts of air are discharged from the turbo charger and therefore releasing the full potential of your engines capabilities. Unlike the OEM discharge pipe that is prone to failure from increased boost or many heat cycles, the Forge Motorsport high flow discharge pipe will not crack or fail - ever. This is backed up by our no quibble Lifetime warranty.
 
 
 
Supplied in black powder coated finish for that OEM look with a choice of hose colours red, blue, or black to compliment the look of your engine bay. No modifications to original equipment are necessary to install this part. This will fit with the stock turbo muffler or with the Forge Motorsport Muffler Delete FMMD2 which will further enhance the benefits of this discharge pipe.   In the box: Hard pipe Silicone Hose Hose Clamps   *NOT COMPATIBLE WITH 7-SPEED DSG MODELS
Compatible Vehicles :
 
Audi
  • A3
    • 1.8/2.0 TSI 2015 Onwards
  • Q2
    • 2.0 2017-2021
  • S3
    • 2.0 TSI (8V Chassis)
  • TT
    • Mk3
      • 2.0 TSI 2015 Onwards
  • TTS
    • Mk3 8S (2014-)
Volkswagen
  • Arteon
    • 2.0 TSI
  • Golf
    • MK7
      • 1.8 TFSI
      • GTI
      • GTI Clubsport ED40
      • R
    • MK7.5
      • GTI
      • R
  • T-Roc
    • 2.0 2018-2021
  • Touran
    • 1.8 TFSI
 
FMINT24 is a performance intercooler for the MQB platforms with the EA888 GEN4 Engine. Produced, designed, and tested, at our headquarters in Gloucester UK. Throughout the development process we have strived to improve the efficiency and performance of the EA888 GEN4 engine. Our project brief was to develop an intercooler that utilised all of the available space in the original position of the OEM intercooler, and to ensure the inlet air temperature is reduced, without any negative effects on the boost pressure or engine and transmission cooling. In the MQB chassis the intercooler housing is particularly restricted and confined to a small amount of space, due to it not only housing the intercooler, but also the radiator and air conditioning condenser. The front panel in theory is a sandwich pack that houses the auxiliary cooling components. This means in order to increase the size of the intercooler without paying detriment to the performance of the surrounding items, and with also having very little extra space available, that it can be very difficult to execute the perfect blend of a high flow intercooler within such a close proximity.
Our research and development engineers started with a brief to fit our existing intercooler (FMMK7FMIC) that was for the MK7 platform, to our development VW MK8 Golf R. Upon installation, we then tried to establish if we could re-engineer the intercooler with an increased inlet and outlet size along with increasing the volumetric capacity to increase flow along with future proofing the design to work well with highly tuned stage 3 plus EA888 Gen 4 engines. Using a combination of scanning software and traditional measuring methods, the design was created. This was then fine-tuned by our flow dynamics simulations programs (CFD), and the end tanks were initially created by 3D printers. This enabled us to ensure the fit was perfect on the vehicle before any prototype castings or machined billet end tanks were produced ready for dyno testing.
Several baffle configurations were designed, and flow simulated to ensure the maximum performance was obtained to keep the core working at its optimum, along with ensuring all its cooling capabilities had been upheld, and that the total volume of the core internal is utilised for optimum performance. With an increase in inlet and outlet sizes, we then turned our attention to the design of our silicone hoses. With flow in mind, we have created a step within the hose so where the hose meets the hot and cold side of the inlet and outlet junctions the transition is seamless, this helps to lesson any disturbance to the airflow and prevent unwanted turbulence. To further aid with flow, the inlet and outlets have been increased to 76mm from the OEM size of 63mm which equates to a 45% increase in surface area.
The consideration of space and our clever design has led us to produce several intercooler cores with different fin configurations and internal capacities. Depending on the core design, testing results led us to choose a bar and plate design with over 83% more volume than the OEM intercooler, and with a frontal area increase of 10%.

Why do we test different cores?

Here at Forge Motorsport, when developing an intercooler, we will test several different cores for each application. For example, a bar and plate style core, a tube and fin style core along with different fin pitches and heights, as well as changing the internal fin pitches/shapes and density within the tube; thus enabling us to fine tune the amount of pressure drop the intercooler produces. Pressure drop is not always a bad thing, as our testing and research has proven on various projects. This is because the pressurized air velocity is being stalled by the pressure drop within the cooler thus allowing more time to cool the air within the cooler itself, as air passes through the non-pressurized face of the core, that is open to the atmosphere.
Too much pressure drop can of course have a problem on the higher performance engines as the intercooler reaches its maximum efficiency the turbo has to work a lot harder to force the air through the core. This in turn creates higher inlet air temps (IAT’s) due to the turbo creating more heat as it is over stressed and worked harder. No pressure drop can also prove to be inefficient as the cooler will not lower the charge temperature again resulting in higher inlet air temperatures. Dyno Results Testing was completed using Performance Remap in Gloucester with their VTEC 4-wheel drive dynamometer. This was to ensure all our data has been achieved with results as accurately as possible by an independent tuner. As you can see from the dyno results below, peak power was increased from stock by 11bhp and 20nm of torque at 5500RPM with the Forge Motorsport performance intercooler installed. The best news is that there are significant torque gains throughout the rev range, meaning that the car power will pick up quicker and pull the whole way through to redline, including an impressive gain in BHP from 5000 RPM TO 6500 RPM. Gains on vehicles with re calibrated software and further hardware performance parts can be expected to be a lot higher due to the substantial drop in IATS when FMINT24 is installed. During our extensive testing, we let the car heat soak on the dyno until the radiator fans tripped on and off (which gives an inlet temperature of around 40°C). We then did a dyno pull from this point which gives a more consistent result and reflects real-world driving conditions more accurately. You can easily see the Forge intercooler cools much quicker and delivers a much greater drop in temperature compared to OEM.
 
 
After more than six pulls on the dyno we still had super safe IAT’s, and the Forge Motorsport intercooler gave results of 34°C at 6548 RPM giving a reduction of 58% over the factory’s intercooler intake temps from 58°C at 6508 RPM. These tests took place in relatively hot conditions with an ambient dyno cell temperature of 23°C proving how inefficient the stock intercooler is. In the summer months, the stock intercooler along with higher inlet air temperatures will have a hugely negative impact on the engine’s performance. In these conditions, the engine management will retard the ignition, resulting in a lower powered engine as temperatures rise and the ECU then pulls out the timing to stop detonation. On a mapped vehicle, the results will be even more detrimental and can lead to possible premature engine wear. If you use your car for fast road or have a high-performance tune in a hot climate, this product is essential. 

Why do we try to decrease IAT's? (Inlet Air Temperature)

Temperature and volume of air supplied to your vehicles engine that is compressed by the turbo charger has a better effect on performance when cool as this is to provide the engine with more oxygen (denser air), thus improving the combustion in each cylinder. In addition, by regulating and reducing the air temperature, it also increases the reliability of an engine by keeping the AFRs (Air Fuel Ratios) in each cylinder at a safe level, which in turn, can increase an engines power due to the air being cooler. A bigger bang is then created within the cylinder, providing the correct amount of fuel is added. This can equate to an increase in BHP and torque.
 
 
​​​​ The Forge Motorsport intercooler is a perfect performance enhancing product that fits directly to the OEM mounting points, making for an easy install, in a relatively short period of time. No cutting of any components is needed, making the installation reversible if the vehicle needs to be returned to stock at any time in the future. The core and end tanks are finished in our black textured anti corrosion coating that also aids with its thermal properties and keeps the product looking that bit stealthier or OEM+. The Forge Motorsport lifetime warranty on all hardware products shows the trust we have in the quality of our products while they are being enjoyed on your pride and joy.
Compatible Vehicles :
 
Audi
  • S3
    • 2.0TSI (8Y Chassis)
    • Sportback 2.0TSI (8Y Chassis)
Volkswagen
  • Golf
    • MK8
      • Clubsport 45
      • GTI
      • R
 
CTS Turbo is proud to announce our Cast Aluminum 4″ turbo inlet for 8V Audi RS3/8S Audi TT-RS The biggest issue with the restrictive factory inlet is apparent when you start to increase the power. Our engineers designed the turbo inlet to be as large as possible; yet still fit perfectly. This was accomplished using the latest in 3D scanning and rapid prototyping technology. This results in a 78% increase in volume over the stock turbo inlet. The larger inlet will provide increased flow to the turbo and make sure your 2.5T has all the air that it needs to operate at maximum capacity! This is one of the largest inlet pipes on the market AND it does not cost you a small fortune. Features:
  • 4″ cast aluminum turbo inlet pipe
  • Precision machined fitment for factory turbo (hybrid turbo fitments coming soon)
  • Factory-style PCV connection
  • Developed, tested and machined in-house
  • Compatible with most aftermarket intakes (3″-4″ reducer or 4″ coupler is required, confirm on vehicle)
  • Not recommended for use with factory air intake pipe (CTS Turbo high-flow pipe for stock air box is available separately)
Fitment:
  • 2018-2020 Audi 8V and 8V.2 (DAZA and DWNA)
  • 2017-2021 Audi TT-RS (DAZA and DWNA)
INSTALLATION GUIDE Does not fit Right Hand Drive vehicles. Coupler to attach intake is not included.

Model Generation:

AUDI RS3 2018 - 2020 8V

AUDITags TTRS 2017 - 2020 8S

This is the CTS Turbo Direct-Fit intercooler upgrade for VW MQB MK8 GOLF GTI/GOLF R with updated BLACK finish. It is important to upgrade your intercooler to keep the AIT low and your car running at it’s best. Heat soak from stock or inferior intercoolers will rob you of performance and could lead to pinging/timing pull. CTS Turbo premium intercooler upgrade is a direct replacement for your factory intercooler. Our intercooler allows you to keep the charged air cold and keep your power consistent. High flowing core allows for minimal pressure drop and allows air to pass through to the radiator. Silicone hoses are included! Features:
  • High-density bar-and-plate core with cast end tanks, capable of supporting 600whp.
  • Airflow directing fins are cast into the end tanks to help with even air distribution inside the intercooler.
  • Fully compatible with Adaptive Cruise Control (ACC) and Frontal Collision Warning system Collision Warning system to be adapted by VW after install).
  • One of the largest intercooler cores on the market with complete direct fitment.
  • CAD engineered for excellent performance and perfect fitment.
  • High-pass core allows outside air to get to radiator without issue.
Fitment:
  • 2022 MK8 Golf GTI
  • 2022 MK8 Golf R
Make Model Year Generation
VW GOLF R 2022 MK8
VW GTI 2022 MK8
CTS Turbo is proud to announce our Upgraded Aluminum Radiator for the VW/Audi MQB 1.8TSI and 2.0TSI vehicles. The factory radiator is small and not efficient enough to provide sufficient cooling to tuned engines. We designed our radiator to overcome that problem. CTS Turbo radiator has an increased volume over stock, with a dual-pass core was made to be higher flowing and larger than the factory, but still drop into the stock location using all the factory mounting points. To make things even better, this part will eliminate plastic endtanks that are prone to leaks. Keep your MQB running cool and reliably with CTS Turbo Aluminum Radiator. Features:
  • High Performance aluminum radiator
  • High-efficiency dual-pass core
  • Hand-welded and pressure tested to ensure reliable performance.
  • Plug-n-play replacement for the factory part, no modifications required if installed with factory intercooler.***
Note: Does not fit VW Tiguan or Audi Q3 models. Does not fit Gen3 non-MQB engines. ***Fitment with aftermarket intercoolers and/or charge pipes will require you to clearance the radiator fan shroud, remove the engine harness and coolant hoses from factory mounting location. One crashbar mounting bolt must be cut shorter to allow clearance with AC lines.  
Make Model Year Generation
AUDI A3 2015 - 2020 8V
AUDI S3 2015 - 2020 8V
AUDI TT 2015 - 2021 8J
 
VW GOLF R 2015 - 2020 MK7/7.5
VW GOLF R 2021
VW GTI 2015 - 2020 MK7/7.5
VW GTI 2021 MK8
 

Racingline Performance DSG Oil Cooler System for MQB DQ250 (6 Speed Only) - VWR29G7250

Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade – losing its lubrication properties.

  • When this happens, the DSG will protect itself and begin to lower the torque, increase shift times and in extreme circumstances even loose gear selection.
  • The RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15  – 20   degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune).
  • The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler – doubling up your cooling capability when it’s needed with less heat transfer into the water system.
  • Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.

What’s included in the kit

  • Oil cooler mounting brackets
  • AN10 210 series Nylon braided feed and return line
  • Billet CNC thermostatic adaptor block
  • Replacement, low-profile oil/water cooler
  • AN10 10-row oil/air cooler core
  • Fitting kit containing all necessary nuts, bolts, washers and rubber mounting bobbins
The kit for all MQB cars comes supplied with two bracket kits. One kit is for Audi S3 models, the other is for all Golf 7 and other MQB models. Mounting for the bracket set requires drilling bolt holes through the front crash bar. Part number: VWR29G7250

Why fit a DSG Cooler Kit?

Our unique DSG Oil Cooler Kit is an essential fit for any hard-driven MQB 2.0 TSI car running high power levels or in hot climates. It’s a complete ready to install package, using a clever sandwich plate design for straightforward and completely reliable installation.

Transferring more power and torque through the DSG gearbox generates ever more heat to dissipate.  Significantly increased oil temperatures means only one thing: a decrease in the ability for your DSG box to stay properly cooled, eventually causing power drop and gear selection issues.

  • Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade – losing its lubrication properties.
  • When this happens, the DSG will protect itself and begin to lower the torque, increase shift times and in extreme circumstances even loose gear selection.
  • The RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15  – 20   degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune).
  • The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler – doubling up your cooling capability when it’s needed with less heat transfer into the water system.
  • Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.
CONFIRMED APPLICATIONS

VWR29G7250 / DQ250 6-SPEED GEARBOXES ONLY *

*not for US-spec DQ250 with Secondary Air Intake (SAI) system

>
VW Golf 7 & 7.5 GTI & Clubsport
2013-2020
>
VW Golf 7 & 7.5 R
2013-2020
>
VW Golf 7 & 7.5 1.8 TSI
2013-2020
>
VW Passat 2.0 TSI B8
2015+
>
VW Arteon 2.0 TSI
2017+
>
VW T-Roc R 2.0 TSI
2019+
>
VW Tiguan II 2.0 TSI
2016+
>
VW Jetta / GLI 7
2018+
>
Audi S3 8V
2013-2020
>
Audi A3 2.0 TSI / 1.8 TSI 8V
2013-2020
>
Audi TT 2.0 TSI 8S
2014+
>
Audi TTS 2.0 TSI 8S
2015+
>
Audi SQ2
2018+
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Brand

Forge Motorsport
Make

A3, Audi, Golf GTI, Golf R, Q2, S3, TT, TTS, Volkswagen
Model Year

2014, 2015, 2016, 2017, 2018, 2019
Brand

Forge Motorsport
Make

Audi, Golf GTI, Golf R, S3, Volkswagen
Model Year

2020, 2021, 2022, 2023
Brand

CTS Turbo
Make

Audi, RS3, TTRS
Model Year

2017, 2018, 2019, 2020
Brand

CTS Turbo
Make

Golf GTI, Golf R, Volkswagen
Model Year

2022
Brand

CTS Turbo
Make

A3, Audi, Golf GTI, Golf R, S3, TT, Volkswagen
Model Year

2015, 2016, 2017, 2018, 2019, 2020, 2021
Brand

Racingline
Make

A3, Audi, Golf GTI, Golf R, S3, SQ2, TT, TTS, Volkswagen
Model Year

2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020