Mishimoto Performance Charge Pipe Kit, Fits BMW G8X M3/M4 2021+ – MMICP-G80-21
د.إ2,900.00
Upon placing the order, we will get in touch with you to confirm the availability information.
For Instant Enquiry and More Details, Please Click Here
Did you like this product? Add to favorites now and follow the product.
Description
The venerable S58 found in the G8X M3 and M4 follows BMW’s tried and true formula of six cylinders in a row sending power to the back wheels for maximum tire-torturing fun. From the factory, the S58 cranks out up to 503 horsepower and 479 lb.-ft. of torque, but the two turbos tucked next to the engine whisper a tale of limitless possibilities with every shove of the throttle. If you can’t hear them, it might be time to let them whisper a little louder with this performance charge pipe from Mishimoto.
The stock M3/M4 charge pipe has the crucial job of transporting boost from both turbos to the intake manifold and intercooler so it can be turned into power by the engine. Looking at the stock charge pipe, however, you might not think BMW thought this was particularly important. Two rubber hoses carry that precious boost out of the turbos and into an (ugly) plastic merge before it enters the intercooler. Some owners are already seeing cracks and failures of this plastic merge on M3s and M4s pushing more boost. Luckily, Mishimoto has a solution.
The Mishimoto G8X M3/M4 performance charge pipe replaces the stock rubber and plastic with robust silicone and cast aluminum for a charge pipe that’s stronger and 27% less restrictive than stock. Our charge pipe retains the flexibility of the stock front section but replaces the stock rubber hoses with durable silicone for greater heat and pressure tolerance. The plastic merge has been replaced with cast aluminum for a significant durability upgrade, while the transitions have been smoothed to allow improved flow to support future performance upgrades.
This performance charge pipe is a direct fit for your 2021+ BMW G8X M3/M4 and is backed by our Mishimoto Lifetime Warranty for a lifetime of letting your legend breathe free. So, if you’re ready to unleash the limitless potential of your M3 or M4, this Mishimoto performance charge pipe is for you.
| APPLICATIONS | 2021+ BMW G8X M3/M4 |
|---|---|
| ENGINE CODES | S58 |
| CHASSIS CODES | G80 G82 G83 |
| MAXIMUM RECOMMENDED BOOST PRESSURE (PSI) | 60 |
| MAXIMUM RECOMMENDED HORSEPOWER | 1000 |
| OVERALL LENGTH (IN) | 25 |
| OVERALL HEIGHT (IN) | 9 |
| OVERALL WIDTH (IN) | 22 |
Additional information
| Brand | Mishimoto |
|---|---|
| Make | BMW, M3, M4 |
| Model Year | 2020, 2021, 2022, 2023, 2024 |
Quick Comparison
| Settings | Mishimoto Performance Charge Pipe Kit, Fits BMW G8X M3/M4 2021+ - MMICP-G80-21 remove | CTS TURBO B9 A4/A5 SILICONE TURBO INLET HOSE -CTS-SIL-083 remove | THE TURBO ENGINEER TE700 2.5TFSI CZGB / CEPA / CEPB UPGRADE TURBOCHARGER -TTE10033.1 remove | CTS TURBO BMW M5/M6 F10/F12/F13 S63 CHARGE PIPE UPGRADE KIT -CTS-IT-820 remove | CTS TURBO THROTTLE BODY INLET KIT FOR 8V.2/8S AUDI RS3/TT-RS (2018-2020) -CTS-IT-932 remove | TTE IS38RACE IHI UPGRADE TURBOCHARGER -TTE10354 remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | Mishimoto Performance Charge Pipe Kit, Fits BMW G8X M3/M4 2021+ - MMICP-G80-21 remove | CTS TURBO B9 A4/A5 SILICONE TURBO INLET HOSE -CTS-SIL-083 remove | THE TURBO ENGINEER TE700 2.5TFSI CZGB / CEPA / CEPB UPGRADE TURBOCHARGER -TTE10033.1 remove | CTS TURBO BMW M5/M6 F10/F12/F13 S63 CHARGE PIPE UPGRADE KIT -CTS-IT-820 remove | CTS TURBO THROTTLE BODY INLET KIT FOR 8V.2/8S AUDI RS3/TT-RS (2018-2020) -CTS-IT-932 remove | TTE IS38RACE IHI UPGRADE TURBOCHARGER -TTE10354 remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Image |  |  |  |  |  |  | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| SKU | MMICP-G80-21 | CTS-SIL-083 | TTE10033.1 | CTS-IT-820 | CTS-IT-932 | TTE10354 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Price | د.إ2,900.00 | د.إ425.00 | د.إ18,600.00 | د.إ1,020.00 | د.إ1,740.00 | د.إ7,900.00 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Stock | In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Availability | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Content |
The venerable S58 found in the G8X M3 and M4 follows BMW's tried and true formula of six cylinders in a row sending power to the back wheels for maximum tire-torturing fun. From the factory, the S58 cranks out up to 503 horsepower and 479 lb.-ft. of torque, but the two turbos tucked next to the engine whisper a tale of limitless possibilities with every shove of the throttle. If you can't hear them, it might be time to let them whisper a little louder with this performance charge pipe from Mishimoto.
The stock M3/M4 charge pipe has the crucial job of transporting boost from both turbos to the intake manifold and intercooler so it can be turned into power by the engine. Looking at the stock charge pipe, however, you might not think BMW thought this was particularly important. Two rubber hoses carry that precious boost out of the turbos and into an (ugly) plastic merge before it enters the intercooler. Some owners are already seeing cracks and failures of this plastic merge on M3s and M4s pushing more boost. Luckily, Mishimoto has a solution.
The Mishimoto G8X M3/M4 performance charge pipe replaces the stock rubber and plastic with robust silicone and cast aluminum for a charge pipe that's stronger and 27% less restrictive than stock. Our charge pipe retains the flexibility of the stock front section but replaces the stock rubber hoses with durable silicone for greater heat and pressure tolerance. The plastic merge has been replaced with cast aluminum for a significant durability upgrade, while the transitions have been smoothed to allow improved flow to support future performance upgrades.
This performance charge pipe is a direct fit for your 2021+ BMW G8X M3/M4 and is backed by our Mishimoto Lifetime Warranty for a lifetime of letting your legend breathe free. So, if you're ready to unleash the limitless potential of your M3 or M4, this Mishimoto performance charge pipe is for you.
| Turning up the boost in your car increases wear on your stock rubber turbo inlet hose. Eliminate cracking, stretching and deformation with this CTS Turbo B9 A4/A5 Silicone Turbo Inlet Hose. Increased rigidity and higher flow mean less restriction and more power.
Mounting clamps are included.
Product Features:
– Increased Flow
– Improved Sound
– Reduce Turbo Spool Time
– No Modification Required
| AUDI TTRS 8J / RS3 8P, 8V.1 / RS Q3 CZGB / CEPA / CEPB 2.5TFSI TTE700 UPGRADE TURBOCHARGER Introducing our TTE700 performance turbocharger based on the original EA855 DAZA turbocharger to new higher output specification for fitment to the older generation cars. Offering an upgrade to over 600PS on pump petrol. Engineered & Enhanced At the core of our TTE700 is a much larger TTE compressor wheel, chosen because it is highly efficient and creates an extremely high flow for comparative size. Re-Profiled compressor cover to optimised tolerance to ensure maximum compressor efficiency is given. We CNC mill the exhaust turbine housing to accept a larger turbine and shaft. Special profile 360 deg high-performance motorsport journal bearing is fitted, to remain durable at higher loads with no loss in transient response. The actuator used is sprung OE unitIf ordering new, we use the latest generation of BorgWarner original turbochargers with the latest spec Audi thermal heat isolation shielding on the exhaust manifold & turbine housing to lower engine bay temperatures and ensure the best performance and safety. Please note if you send an older generation turbo, without the original AUDI thermal shielding for the "upgrade" process, we will rework your turbo and return without the shielding, unless you buy the extra thermal Isolation process. Depending on stock availability we may substitute TTE thermal shielding and give AUDI original thermal shielding instead. We cannot upgrade the ORIGINAL K16 CEPA, CEPB OR CZGB Turbo to this stage, Biggest possible for the K16 is the TTE500+ Upgrade Turbocharger Equilibrium Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled and then the CHRA are dynamically balanced, but this time depending on application at up to 250,000 RPM in multiple planes using our in-house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with a serial numbered balance test result document.
| The OEM plastic charge pipes that are prone to failing when going beyond stock boost levels. Our charge pipes are mandrel bent aluminum tubing with 1/8′ NPT bungs for water injection.
Features:
Fitment:
BMW F10 M5 S63 2012-2016
BMW F12/F13 S63 M6 2012-2016
| Now fully compatible with all 2018-2020 Audi RS3/TTRS 2.5T DAZA and DNWA engines, this is one kit to fit them all!
CTS Turbo is proud to announce our improved 8V, 8V.2/8S Audi RS3/TTRS Throttle Body Inlet Kit for DAZA and DNWA
Our high flow throttle body inlet is designed it to be larger, but also more aerodynamic than the stock part. Our inlet has a 56% internal volume increase over the stock inlet. Using the latest CAD software, the shape of the inlet tract was flow optimized and cast from aluminum for best performance. All critical parts were CNC machined to ensure perfect fitment and performance.
We have also included our machined throttle body spacer from with two additional ports for boost reference and methanol injection; as well and a high-flow 2.75″ throttle inlet pipe. Custom-made silicone couplers and t-bolt clamps allow for seamless, easy installation.
Features:
| TTE IS38Race IHI Turbocharger
Many of our customers have been asking for a motorsport IS38 turbocharger, Well here it is!
TTE IS38Race Turbocharger is based on the Original Genuine IHI IS38 turbocharger for the EA888.3 2.0TSI VAG Engine, not a cheap aftermarket clone IS38 turbo that are available from others and not disclosed.
A TTE IS38Race has a TTE upgrade performance bearing pack and motorsport balanced TTE core using the IHI Bearing housing and IHI IS38 turbine and Genuine IHI IS38 compressor wheel giving a reliable performance at higher boost levels as used on Stage 1 & 2 software calibrations from all software providers. We also include our TTE CNC silencer delete, removing the original baffle internals and fitting a new billet straight through section to improve the flow and enhance the sound.
This is a direct swap from a standard IS38 so no remap or special calibration required vs standard is38 software.
Precisely balancing the IS38Race turbocharger is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts balance machine, then components are assembled and then the CHRA is dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. A balance report document is supplied with your TTE IS38Race for your reassurance.
Product Highlights:
 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|
Related products
Copyright 2023 © VagLogic Designed by Sunwin Solutions SG
Reviews
There are no reviews yet.