Mishimoto Performance Charge Pipe Kit, Fits BMW G8X M3/M4 2021+ – MMICP-G80-21
د.إ2,900.00
Upon placing the order, we will get in touch with you to confirm the availability information.
For Instant Enquiry and More Details, Please Click Here
Did you like this product? Add to favorites now and follow the product.
Description
The venerable S58 found in the G8X M3 and M4 follows BMW’s tried and true formula of six cylinders in a row sending power to the back wheels for maximum tire-torturing fun. From the factory, the S58 cranks out up to 503 horsepower and 479 lb.-ft. of torque, but the two turbos tucked next to the engine whisper a tale of limitless possibilities with every shove of the throttle. If you can’t hear them, it might be time to let them whisper a little louder with this performance charge pipe from Mishimoto.
The stock M3/M4 charge pipe has the crucial job of transporting boost from both turbos to the intake manifold and intercooler so it can be turned into power by the engine. Looking at the stock charge pipe, however, you might not think BMW thought this was particularly important. Two rubber hoses carry that precious boost out of the turbos and into an (ugly) plastic merge before it enters the intercooler. Some owners are already seeing cracks and failures of this plastic merge on M3s and M4s pushing more boost. Luckily, Mishimoto has a solution.
The Mishimoto G8X M3/M4 performance charge pipe replaces the stock rubber and plastic with robust silicone and cast aluminum for a charge pipe that’s stronger and 27% less restrictive than stock. Our charge pipe retains the flexibility of the stock front section but replaces the stock rubber hoses with durable silicone for greater heat and pressure tolerance. The plastic merge has been replaced with cast aluminum for a significant durability upgrade, while the transitions have been smoothed to allow improved flow to support future performance upgrades.
This performance charge pipe is a direct fit for your 2021+ BMW G8X M3/M4 and is backed by our Mishimoto Lifetime Warranty for a lifetime of letting your legend breathe free. So, if you’re ready to unleash the limitless potential of your M3 or M4, this Mishimoto performance charge pipe is for you.
| APPLICATIONS | 2021+ BMW G8X M3/M4 |
|---|---|
| ENGINE CODES | S58 |
| CHASSIS CODES | G80 G82 G83 |
| MAXIMUM RECOMMENDED BOOST PRESSURE (PSI) | 60 |
| MAXIMUM RECOMMENDED HORSEPOWER | 1000 |
| OVERALL LENGTH (IN) | 25 |
| OVERALL HEIGHT (IN) | 9 |
| OVERALL WIDTH (IN) | 22 |
Additional information
| Brand | Mishimoto |
|---|---|
| Make | BMW, M3, M4 |
| Model Year | 2020, 2021, 2022, 2023, 2024 |
Quick Comparison
| Settings | Mishimoto Performance Charge Pipe Kit, Fits BMW G8X M3/M4 2021+ - MMICP-G80-21 remove | CTS TURBO B9 AUDI A4, A5, ALLROAD 1.8T/2.0T CHARGE PIPE SET (TURBO OUTLET AND THROTTLE PIPE -CTS-IT-291 remove | TTE IS38RACE IHI UPGRADE TURBOCHARGER -TTE10354 remove | THE TURBO ENGINEER TE700 2.5TFSI CZGB / CEPA / CEPB UPGRADE TURBOCHARGER -TTE10033.1 remove | CTS TURBO BMW F-SERIES M140I/M240I/340I/440I B58 GEN1 TURBO INLET PIPE -CTS-HW-506 remove | RACINGLINE TURBO INLET ELBOW FOR 2.0 TSI EA888.4 EVO Engine 300PS/310PS/320PS GOLF 8 R, GOLF 8 GTI CLUBSPORT, AUDI S3 8Y - VWR120010 remove | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | Mishimoto Performance Charge Pipe Kit, Fits BMW G8X M3/M4 2021+ - MMICP-G80-21 remove | CTS TURBO B9 AUDI A4, A5, ALLROAD 1.8T/2.0T CHARGE PIPE SET (TURBO OUTLET AND THROTTLE PIPE -CTS-IT-291 remove | TTE IS38RACE IHI UPGRADE TURBOCHARGER -TTE10354 remove | THE TURBO ENGINEER TE700 2.5TFSI CZGB / CEPA / CEPB UPGRADE TURBOCHARGER -TTE10033.1 remove | CTS TURBO BMW F-SERIES M140I/M240I/340I/440I B58 GEN1 TURBO INLET PIPE -CTS-HW-506 remove | RACINGLINE TURBO INLET ELBOW FOR 2.0 TSI EA888.4 EVO Engine 300PS/310PS/320PS GOLF 8 R, GOLF 8 GTI CLUBSPORT, AUDI S3 8Y - VWR120010 remove | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Image |  |  |  |  |  |  | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| SKU | MMICP-G80-21 | CTS-IT-291 | TTE10354 | TTE10033.1 | CTS-HW-506 | VWR120010 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rating | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Price | د.إ2,900.00 | د.إ970.00 | د.إ7,900.00 | د.إ18,600.00 | د.إ650.00 | د.إ1,320.00 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Stock | In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Availability | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Add to cart | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Content |
The venerable S58 found in the G8X M3 and M4 follows BMW's tried and true formula of six cylinders in a row sending power to the back wheels for maximum tire-torturing fun. From the factory, the S58 cranks out up to 503 horsepower and 479 lb.-ft. of torque, but the two turbos tucked next to the engine whisper a tale of limitless possibilities with every shove of the throttle. If you can't hear them, it might be time to let them whisper a little louder with this performance charge pipe from Mishimoto.
The stock M3/M4 charge pipe has the crucial job of transporting boost from both turbos to the intake manifold and intercooler so it can be turned into power by the engine. Looking at the stock charge pipe, however, you might not think BMW thought this was particularly important. Two rubber hoses carry that precious boost out of the turbos and into an (ugly) plastic merge before it enters the intercooler. Some owners are already seeing cracks and failures of this plastic merge on M3s and M4s pushing more boost. Luckily, Mishimoto has a solution.
The Mishimoto G8X M3/M4 performance charge pipe replaces the stock rubber and plastic with robust silicone and cast aluminum for a charge pipe that's stronger and 27% less restrictive than stock. Our charge pipe retains the flexibility of the stock front section but replaces the stock rubber hoses with durable silicone for greater heat and pressure tolerance. The plastic merge has been replaced with cast aluminum for a significant durability upgrade, while the transitions have been smoothed to allow improved flow to support future performance upgrades.
This performance charge pipe is a direct fit for your 2021+ BMW G8X M3/M4 and is backed by our Mishimoto Lifetime Warranty for a lifetime of letting your legend breathe free. So, if you're ready to unleash the limitless potential of your M3 or M4, this Mishimoto performance charge pipe is for you.
| At CTS Turbo we are proud to announce our new intercooler charge pipes for the B9 Audi A4, A5, AllRoad 1.8T/2.0T.
The OEM charge piping uses a rubber hose as turbo outlet connection and plastic cold-side pipes with a flow-impeding “resonator”. Factory piping is not optimized for performance; so we had to step in and make our charge pipe set of 2.5″ aluminum mandrel-bent tube. Our parts replace soft turbo outlet hose and the small resonated plastic throttle body pipe.
All of the components included in the CTS charge pipe set work flawlessly together to provide increased efficiency, horsepower and torque throughout the entire power-band. By removing the restricting resonator on the cold-side piping, you can enjoy a slight increase in turbo sound!
Product Details:
| TTE IS38Race IHI Turbocharger
Many of our customers have been asking for a motorsport IS38 turbocharger, Well here it is!
TTE IS38Race Turbocharger is based on the Original Genuine IHI IS38 turbocharger for the EA888.3 2.0TSI VAG Engine, not a cheap aftermarket clone IS38 turbo that are available from others and not disclosed.
A TTE IS38Race has a TTE upgrade performance bearing pack and motorsport balanced TTE core using the IHI Bearing housing and IHI IS38 turbine and Genuine IHI IS38 compressor wheel giving a reliable performance at higher boost levels as used on Stage 1 & 2 software calibrations from all software providers. We also include our TTE CNC silencer delete, removing the original baffle internals and fitting a new billet straight through section to improve the flow and enhance the sound.
This is a direct swap from a standard IS38 so no remap or special calibration required vs standard is38 software.
Precisely balancing the IS38Race turbocharger is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts balance machine, then components are assembled and then the CHRA is dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. A balance report document is supplied with your TTE IS38Race for your reassurance.
Product Highlights:
 | AUDI TTRS 8J / RS3 8P, 8V.1 / RS Q3 CZGB / CEPA / CEPB 2.5TFSI TTE700 UPGRADE TURBOCHARGER Introducing our TTE700 performance turbocharger based on the original EA855 DAZA turbocharger to new higher output specification for fitment to the older generation cars. Offering an upgrade to over 600PS on pump petrol. Engineered & Enhanced At the core of our TTE700 is a much larger TTE compressor wheel, chosen because it is highly efficient and creates an extremely high flow for comparative size. Re-Profiled compressor cover to optimised tolerance to ensure maximum compressor efficiency is given. We CNC mill the exhaust turbine housing to accept a larger turbine and shaft. Special profile 360 deg high-performance motorsport journal bearing is fitted, to remain durable at higher loads with no loss in transient response. The actuator used is sprung OE unitIf ordering new, we use the latest generation of BorgWarner original turbochargers with the latest spec Audi thermal heat isolation shielding on the exhaust manifold & turbine housing to lower engine bay temperatures and ensure the best performance and safety. Please note if you send an older generation turbo, without the original AUDI thermal shielding for the "upgrade" process, we will rework your turbo and return without the shielding, unless you buy the extra thermal Isolation process. Depending on stock availability we may substitute TTE thermal shielding and give AUDI original thermal shielding instead. We cannot upgrade the ORIGINAL K16 CEPA, CEPB OR CZGB Turbo to this stage, Biggest possible for the K16 is the TTE500+ Upgrade Turbocharger Equilibrium Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled and then the CHRA are dynamically balanced, but this time depending on application at up to 250,000 RPM in multiple planes using our in-house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with a serial numbered balance test result document.
| CTS Turbo is proud to release our F-series BMW B58 GEN1 turbo inlet pipe for M140i/M240i/340i/440i.
We designed our inlet to work with our intake system and it is compatible with the OEM intake system. Our inlet will provide more sound and flow compared to stock. This will improve throttle response, more power and reliability.
Simple installation takes 10 minutes and can be done using basic hand tools.
Product features:
| FOR 2.0TSI EA888.4 'HIGHER OUTPUT' 300/310/320PS (CONTINENTAL TURBO)Release power with the 2.0 TSI gen 4 Turbo Inlet System. A significantly enlarged airflow path from intake straight into turbo.
WHAT THE TURBO INLET SYSTEM DOES.Our new Turbo Inlet System for the 300-320PS MQB 'EVO' cars such as Golf 8R, GTI CS, Audi S3 8Y etc is a matched package of our much larger diameter, free flowing Turbo 90 Inlet paired with reinforced Silicone Turbo Inlet Hose for much higher airflow between intake and turbo.
CONFIRMED APPLICATIONS
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight | N/A | N/A | N/A | N/A | N/A | N/A | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|
Related products
Copyright 2023 © VagLogic Designed by Sunwin Solutions SG
Reviews
There are no reviews yet.