Snow Performance – Boost Cooler Stage 2E Power-Max – SP10250

SKU: SP10250
In Stock

د.إ2,200.00

Upon placing the order, we will get in touch with you to confirm the availability information.

For Instant Enquiry and More Details, Please Click Here

In Stock
Add to Wishlist
Add to Wishlist

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist
Low Prices

Price match guarantee

Guaranteed Fitment.

Always the correct part

In-House Experts.

We know our products

Wide Product Selection

Endless Possibilities

Category:

Description

Boost Cooler water injection can achieve a power increase of up to 10-25% in turbo and supercharged engines without thermally overloading the engine. The charge air temperature is lowered by up to 60°C, the combustion chamber is cooled and the thermal load on already tuned vehicles is effectively reduced.

Water or water/alcohol (methanol or ethanol) is injected at high pressure into the hot charge air in a finely atomised form as soon as the desired starting charge pressure is reached. The evaporating liquid achieves an extremely effective charge air and intercooling, which, among other things, prevents uncontrolled combustion (“knocking”). The effect is demonstrably comparable with 116 octane racing petrol.

The Boost Cooler is unsurpassed in atomisation! The liquid is swirled inside the Hyper-Sonic atomiser nozzle at supersonic speed before being forced through the Venturi orifice. With the included Dual Stage Upgrade, 2 atomiser nozzles are used to inject as early as possible with the primary nozzle and to achieve maximum cooling and performance in peak loads with the switched-on 2nd nozzle.

  • Boost pressure-dependent injection control – Optimal for all centrifugal compressors (Procharger, Vortech) and large turbochargers
  • Higher boost pressure and/or more aggressive ignition without knocking combustion – additional power up to 25% possible.
  • Dual Stage technology for maximum efficiency in all load ranges
  • Octane booster, 116 octane racing fuel performance possible with regular gas
  • Earlier ignition timing or compression without knocking combustion. Up to 25% more power possible.
  • More power and torque with simultaneous reduction of the thermal load on engines that have already been modified, e.g. by chip tuning, NOS or LPG/autogas.
  • Effective intake air cooling, compensation of power losses at higher outside temperatures
  • Reduction of the specific fuel consumption.
  • Deposit-free combustion chamber and intake tract, without formation of oil carbon.
  • Easy installation

Additional information

Brand

Snow Performance

Make

AMG C63, AMG E63, AMG G63, AMG GT/GTS/GTR/GTC, AMG S63, Audi, Golf GTI, Golf R, Mercedes-Benz, R8, RS3, RS4, RS5, RS6, RS7, S3, S4, S5, S6, S7, S8, Supra, Toyota, Volkswagen

Model Year

2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

Reviews

There are no reviews yet.

Be the first to review “Snow Performance – Boost Cooler Stage 2E Power-Max – SP10250”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsSnow Performance - Boost Cooler Stage 2E Power-Max - SP10250 removeBLACK BOOST MERCEDES AMG M157/M278 RACING COOLANT THERMOSTAT -BBTMT002 removeCTS TURBO HIGH-PERFORMANCE RADIATOR FOR VW/AUDI MK7/8V/8S MQB (EA888.3) -CTS-HX-007 removeRACINGLINE 2.0 TSI DSG OIL COOLER - MQB DQ250 6-SPEED VWR29G7250 removeCSF’s New W205 AMG Auxiliary Radiators (CSF #8187) -CSF8187 removeRacingline VWR Oil Cooler Replacement Filter - VWR180001 remove
NameSnow Performance - Boost Cooler Stage 2E Power-Max - SP10250 removeBLACK BOOST MERCEDES AMG M157/M278 RACING COOLANT THERMOSTAT -BBTMT002 removeCTS TURBO HIGH-PERFORMANCE RADIATOR FOR VW/AUDI MK7/8V/8S MQB (EA888.3) -CTS-HX-007 removeRACINGLINE 2.0 TSI DSG OIL COOLER - MQB DQ250 6-SPEED VWR29G7250 removeCSF’s New W205 AMG Auxiliary Radiators (CSF #8187) -CSF8187 removeRacingline VWR Oil Cooler Replacement Filter - VWR180001 remove
Image
SKUSP10250BBTMT002CTS-HX-007VWR29G7250CSF8187VWR180001
Priceد.إ2,200.00د.إ500.00د.إ2,400.00د.إ3,200.00د.إ3,400.00د.إ250.00
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

DescriptionUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereThis product will be in stock and available for purchase.Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereThis product will be in stock and available for purchase. The Oil Cooler Kit includes a pretty special oil filter. The filter element is made from high-flow stainless steel micronic filter cloth – a medical grade material guaranteed to filter out oil contamination better than paper-based filters, all helping to avoid the risk of resultant engine damage.
ContentBoost Cooler water injection can achieve a power increase of up to 10-25% in turbo and supercharged engines without thermally overloading the engine. The charge air temperature is lowered by up to 60°C, the combustion chamber is cooled and the thermal load on already tuned vehicles is effectively reduced. Water or water/alcohol (methanol or ethanol) is injected at high pressure into the hot charge air in a finely atomised form as soon as the desired starting charge pressure is reached. The evaporating liquid achieves an extremely effective charge air and intercooling, which, among other things, prevents uncontrolled combustion ("knocking"). The effect is demonstrably comparable with 116 octane racing petrol. The Boost Cooler is unsurpassed in atomisation! The liquid is swirled inside the Hyper-Sonic atomiser nozzle at supersonic speed before being forced through the Venturi orifice. With the included Dual Stage Upgrade, 2 atomiser nozzles are used to inject as early as possible with the primary nozzle and to achieve maximum cooling and performance in peak loads with the switched-on 2nd nozzle.
  • Boost pressure-dependent injection control - Optimal for all centrifugal compressors (Procharger, Vortech) and large turbochargers
  • Higher boost pressure and/or more aggressive ignition without knocking combustion - additional power up to 25% possible.
  • Dual Stage technology for maximum efficiency in all load ranges
  • Octane booster, 116 octane racing fuel performance possible with regular gas
  • Earlier ignition timing or compression without knocking combustion. Up to 25% more power possible.
  • More power and torque with simultaneous reduction of the thermal load on engines that have already been modified, e.g. by chip tuning, NOS or LPG/autogas.
  • Effective intake air cooling, compensation of power losses at higher outside temperatures
  • Reduction of the specific fuel consumption.
  • Deposit-free combustion chamber and intake tract, without formation of oil carbon.
  • Easy installation
BlackBoost Performance Engineering - Racing Coolant Thermostat. With our BlackBoost Racing Coolant Thermostat the coolant circulation with the radiator is always at 100% open. The factory coolant thermostat opens at 100°C / 212°F. Only for racing application, not recommended be used under very cold weather conditions. Applicable for: all M157 / M278 enginesCTS Turbo is proud to announce our Upgraded Aluminum Radiator for the VW/Audi MQB 1.8TSI and 2.0TSI vehicles. The factory radiator is small and not efficient enough to provide sufficient cooling to tuned engines. We designed our radiator to overcome that problem. CTS Turbo radiator has an increased volume over stock, with a dual-pass core was made to be higher flowing and larger than the factory, but still drop into the stock location using all the factory mounting points. To make things even better, this part will eliminate plastic endtanks that are prone to leaks. Keep your MQB running cool and reliably with CTS Turbo Aluminum Radiator. Features:
  • High Performance aluminum radiator
  • High-efficiency dual-pass core
  • Hand-welded and pressure tested to ensure reliable performance.
  • Plug-n-play replacement for the factory part, no modifications required if installed with factory intercooler.***
Note: Does not fit VW Tiguan or Audi Q3 models. Does not fit Gen3 non-MQB engines. ***Fitment with aftermarket intercoolers and/or charge pipes will require you to clearance the radiator fan shroud, remove the engine harness and coolant hoses from factory mounting location. One crashbar mounting bolt must be cut shorter to allow clearance with AC lines.  
Make Model Year Generation
AUDI A3 2015 - 2020 8V
AUDI S3 2015 - 2020 8V
AUDI TT 2015 - 2021 8J
 
VW GOLF R 2015 - 2020 MK7/7.5
VW GOLF R 2021
VW GTI 2015 - 2020 MK7/7.5
VW GTI 2021 MK8
 

Racingline Performance DSG Oil Cooler System for MQB DQ250 (6 Speed Only) - VWR29G7250

Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade – losing its lubrication properties.

  • When this happens, the DSG will protect itself and begin to lower the torque, increase shift times and in extreme circumstances even loose gear selection.
  • The RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15  – 20   degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune).
  • The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler – doubling up your cooling capability when it’s needed with less heat transfer into the water system.
  • Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.

What’s included in the kit

  • Oil cooler mounting brackets
  • AN10 210 series Nylon braided feed and return line
  • Billet CNC thermostatic adaptor block
  • Replacement, low-profile oil/water cooler
  • AN10 10-row oil/air cooler core
  • Fitting kit containing all necessary nuts, bolts, washers and rubber mounting bobbins
The kit for all MQB cars comes supplied with two bracket kits. One kit is for Audi S3 models, the other is for all Golf 7 and other MQB models. Mounting for the bracket set requires drilling bolt holes through the front crash bar. Part number: VWR29G7250

Why fit a DSG Cooler Kit?

Our unique DSG Oil Cooler Kit is an essential fit for any hard-driven MQB 2.0 TSI car running high power levels or in hot climates. It’s a complete ready to install package, using a clever sandwich plate design for straightforward and completely reliable installation.

Transferring more power and torque through the DSG gearbox generates ever more heat to dissipate.  Significantly increased oil temperatures means only one thing: a decrease in the ability for your DSG box to stay properly cooled, eventually causing power drop and gear selection issues.

  • Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade – losing its lubrication properties.
  • When this happens, the DSG will protect itself and begin to lower the torque, increase shift times and in extreme circumstances even loose gear selection.
  • The RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15  – 20   degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune).
  • The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler – doubling up your cooling capability when it’s needed with less heat transfer into the water system.
  • Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.
CONFIRMED APPLICATIONS

VWR29G7250 / DQ250 6-SPEED GEARBOXES ONLY *

*not for US-spec DQ250 with Secondary Air Intake (SAI) system

>
VW Golf 7 & 7.5 GTI & Clubsport
2013-2020
>
VW Golf 7 & 7.5 R
2013-2020
>
VW Golf 7 & 7.5 1.8 TSI
2013-2020
>
VW Passat 2.0 TSI B8
2015+
>
VW Arteon 2.0 TSI
2017+
>
VW T-Roc R 2.0 TSI
2019+
>
VW Tiguan II 2.0 TSI
2016+
>
VW Jetta / GLI 7
2018+
>
Audi S3 8V
2013-2020
>
Audi A3 2.0 TSI / 1.8 TSI 8V
2013-2020
>
Audi TT 2.0 TSI 8S
2014+
>
Audi TTS 2.0 TSI 8S
2015+
>
Audi SQ2
2018+
The High-Performance All-Aluminum Auxiliary Radiators work in conjunction with the rest of the cooling system to reduce temperatures throughout. This is critical as the Auxiliary Radiators not only help keep engine water temperatures lower, but also are utilized as the heat exchange medium in the air-to-water charge-air coolers for the turbocharger system to reduce intake air temperatures (IATs). Overall, the Auxiliary Radiators larger capacity prolongs the heat soak threshold and assists in keeping temperatures in optimal ranges.

CSF W205 AMG Auxiliary Radiators Features (CSF #8187):

  • Sold Individually – Vehicles With 2 Aux. Radiators Must Purchase Qty. 2
  • 2-Row High-Performance Core Featuring CSF’s B-Tube Technology
  • Core Features Ultra Efficient 6.5mm Tall Fins with a Multi-Louvered Design for Maximum Surface Area Contact
  • Approx. Double the Capacity of OEM (~100% More Capacity – OEM 26mm Core vs. CSF 42mm Core)
  • 100% All-Aluminum TIG-Welded Construction
  • CNC Machined Mounting Brackets and OEM Style “Quick Connect” Inlet/Outlet
  • Includes Detachable Rock Guard
  • Multi-Fit – Fits Both Left & Right Side (For Vehicles With One or Two Auxiliary Radiators)
  • True “Drop-in Fit” Requires No Modifications to Install
  • Individually Leak and Pressure Tested
  • High-Performance Upgrade Suitable for Professional Racing, Street Performance, or OEM Replacement
  • 1 Hour “Mirror Finish” Hand Polish
  • 2 Year Limited Warranty
  • Applications:
    • 17 Mercedes AMG GT – R190 (Fits Left & Right – 2 Per Vehicle)
    • 16-17 Mercedes Benz AMG GT S – R190 (Fits Left & Right – 2 Per Vehicle)
    • 16-21 Mercedes Benz C 63 AMG – W205 (1 Per Vehicle)
    • 15-21 Mercedes Benz C 63 AMG S – W205 (Fits Left & Right – 2 Per Vehicle)
    • 16-19 Mercedes Benz GLE 63 AMG – X292 (Fits Left & Right – 2 Per Vehicle)
    • 16-19 Mercedes Benz GLE 63 AMG S – X292 (Fits Left & Right – 2 Per Vehicle)
    • 17-19 Mercedes Benz GLS 63 AMG – X292 (Fits Left & Right – 2 Per Vehicle)
  • OEM Part Number:
    • Mercedes: 099-500–59-03
Racingline VWR Oil Cooler Replacement Filter - VWR180001
  • 5 times the flow of comparable paper oil filters
  • Consistent filtering across the entire filter surface
  • Magnetic prefiltering to remove microscopic ferrous materials before they reach the filter itself
The filter itself is available separately from all RacingLine dealers for servicing. Whilst this filter has a much longer service life than the factory paper elements do, we recommend as best-practice to change filter with every oil change.
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Brand

Snow Performance

Make

AMG C63, AMG E63, AMG G63, AMG GT/GTS/GTR/GTC, AMG S63, Audi, Golf GTI, Golf R, Mercedes-Benz, R8, RS3, RS4, RS5, RS6, RS7, S3, S4, S5, S6, S7, S8, Supra, Toyota, Volkswagen

Model Year

2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

Brand

Black Boost

Make

AMG CLS63, AMG E63, AMG S63, Mercedes-Benz

Model Year

2011, 2012, 2013, 2014, 2015, 2016

Brand

CTS Turbo

Make

A3, Audi, Golf GTI, Golf R, S3, TT, Volkswagen

Model Year

2015, 2016, 2017, 2018, 2019, 2020, 2021

Brand

Racingline

Make

A3, Audi, Golf GTI, Golf R, S3, SQ2, TT, TTS, Volkswagen

Model Year

2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020

Brand

CSF Radiators

Make

AMG C63, AMG GLE63, AMG GT/GTS/GTR/GTC, Mercedes-Benz

Model Year

2015, 2016, 2017, 2018, 2019, 2020, 2021

Brand

Racingline

Make

Golf GTI, Golf R, Volkswagen

Model Year

2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023