THE TURBO SYSTEM TTE700 EVO EA855 2.5 TFSI UPGRADE TURBOCHARGER -SW10032.1
د.إ18,600.00
Upon placing the order, we will get in touch with you to confirm the availability information.
For Instant Enquiry and More Details, Please Click Here
Did you like this product? Add to favorites now and follow the product.
Description
TTE700 EVO UPGRADE TURBOCHARGER FOR RS3 8V.2 & 8Y / TTRS 8S DAZA, DNWA, DNWC
A TTE700 Is an original RS3 8V.2/TTRS 8S turbocharger that we the THETURBOENGINEERS Rework to make amazing performance yet still plug & play fitting with an upgrade inlet. To make a TTE700 the compressor wheel is exchanged for a TTE milled aluminum wheel with state-of-the-art geometry, 7+7 blade, and of a much larger size, so producing extra power. Equally, we change the original exhaust turbine for a far larger but very lightweight 9 blade TTE designed the turbine for lower exhaust gas backpressure giving greater performance. We also fitted a TTE motorsport upgrade bearing system for durability. Boost response as always is focused on when we were designing this unit and it does not disappoint.
If ordering new, we use the latest generation of BorgWarner original turbochargers with the latest spec Audi thermal heat isolation shielding on the exhaust manifold & turbine housing to lower engine bay temperatures and ensure the best performance and safety.
Please note if you send an older generation turbo, without the original AUDI thermal shielding for the “upgrade” process, we will rework your turbo and return without the shielding, unless you buy the extra thermal Isolation process. Depending on stock availability we may substitute TTE thermal shielding and give AUDI original thermal shielding instead.
Equilibrium
Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled and then the CHRA are dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with a serial numbered balance test result document.
Features :
- TTE Billet Milled 7+7 Blade, 63mm Inlet compressor
- TTE 9 Blade High-flow Low-mass turbine
- TTE Upgrade bearing pack
- Genuine BorgWarner Turbocharger as the base part
- Genuine BorgWarner actuator
- Thermally shielded exhaust manifold and housing
- CNC Optimized Compressor Cover Machining Clearances
- Plug and Play Installation
- 600+ depending on fuel (link here for required upgrade injectors)
- Single parts finely balanced then components assembled and core high-speed VSR balanced
- Supplied with a balance test result document
- Software recalibration is required
- Proven TheTurboEngineers quality
- Made in Germany
From time to time when buying new, we might supply the upgrade TTE thermal isolation free of charge if AUDI OEM heat shielded units are not avalible.
| Make | Model | Submodel | Engine |
|---|---|---|---|
| Audi | 8S TTRS | Quattro | 2.5T |
| Audi | RS3 | 8V (2018+) | 2.5T |
Additional information
| Brand | The Turbo Engineer |
|---|---|
| Make | Audi, RS3, TTRS |
| Model Year | 2015, 2016, 2017, 2018, 2019, 2020 |
Quick Comparison
| Settings | THE TURBO SYSTEM TTE700 EVO EA855 2.5 TFSI UPGRADE TURBOCHARGER -SW10032.1 remove | CTS TURBO B9 AUDI SQ5 3.0T CHARGE PIPE -CTS-IT-294 remove | CTS TURBO BMW F80/82/83/87 M2C/M3/M4 S55 J-PIPE THROTTLE BODY PIPE -CTS-IT-312 remove | CTS TURBO B9 AUDI S4/S5 3.0T CHARGE PIPE KIT -CTS-IT-292 remove | CTS TURBO B9 AUDI A4, A5, ALLROAD 1.8T/2.0T CHARGE PIPE SET (TURBO OUTLET AND THROTTLE PIPE -CTS-IT-291 remove | CTS TURBO MQB GEN3 1.8T/2.0T AND TFSI GEN2 1.8T/2.0T TURBO MUFFLER DELETE remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | THE TURBO SYSTEM TTE700 EVO EA855 2.5 TFSI UPGRADE TURBOCHARGER -SW10032.1 remove | CTS TURBO B9 AUDI SQ5 3.0T CHARGE PIPE -CTS-IT-294 remove | CTS TURBO BMW F80/82/83/87 M2C/M3/M4 S55 J-PIPE THROTTLE BODY PIPE -CTS-IT-312 remove | CTS TURBO B9 AUDI S4/S5 3.0T CHARGE PIPE KIT -CTS-IT-292 remove | CTS TURBO B9 AUDI A4, A5, ALLROAD 1.8T/2.0T CHARGE PIPE SET (TURBO OUTLET AND THROTTLE PIPE -CTS-IT-291 remove | CTS TURBO MQB GEN3 1.8T/2.0T AND TFSI GEN2 1.8T/2.0T TURBO MUFFLER DELETE remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Image |  |  |  |  |  |  | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| SKU | SW10032.1 | CTS-IT-294 | CTS-IT-312 | CTS-IT-292 | CTS-IT-291 | CTS-HW-0199 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Price | د.إ18,600.00 | د.إ1,260.00 | د.إ715.00 | د.إ1,095.00 | د.إ970.00 | د.إ450.00 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Stock | In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Availability | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Content | TTE700 EVO UPGRADE TURBOCHARGER FOR RS3 8V.2 & 8Y / TTRS 8S DAZA, DNWA, DNWC A TTE700 Is an original RS3 8V.2/TTRS 8S turbocharger that we the THETURBOENGINEERS Rework to make amazing performance yet still plug & play fitting with an upgrade inlet. To make a TTE700 the compressor wheel is exchanged for a TTE milled aluminum wheel with state-of-the-art geometry, 7+7 blade, and of a much larger size, so producing extra power. Equally, we change the original exhaust turbine for a far larger but very lightweight 9 blade TTE designed the turbine for lower exhaust gas backpressure giving greater performance. We also fitted a TTE motorsport upgrade bearing system for durability. Boost response as always is focused on when we were designing this unit and it does not disappoint. If ordering new, we use the latest generation of BorgWarner original turbochargers with the latest spec Audi thermal heat isolation shielding on the exhaust manifold & turbine housing to lower engine bay temperatures and ensure the best performance and safety. Please note if you send an older generation turbo, without the original AUDI thermal shielding for the "upgrade" process, we will rework your turbo and return without the shielding, unless you buy the extra thermal Isolation process. Depending on stock availability we may substitute TTE thermal shielding and give AUDI original thermal shielding instead. Equilibrium Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled and then the CHRA are dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with a serial numbered balance test result document. Features :
From time to time when buying new, we might supply the upgrade TTE thermal isolation free of charge if AUDI OEM heat shielded units are not avalible.
| CTS Turbo is excited to announce the release of the B9 Audi SQ5 3.0T TFSI charge pipe upgrade kit. Factory pipe that connects the intercooler to the throttle body is made of brittle plastic. It’s wise to replace it with an all-aluminum high flowing CTS Turbo charge pipe.
Our 2.5″ charge pipe kit will increase flow and improve the reliability of your B9 Audi SQ5. You’ll notice an increase in throttle response and a decrease in turbo lag.
Two water/methanol bung provide an easy way to install injection nozzle.
Product Details
FITMENT:
| Introducing the CTS TURBO J-Pipe forBMW F80, F82, F83 M3/M4 and F87 M2 COMPETITION (S55).
The plastic OEM chargepipe is prone to failure at STOCK boost levels.
CTS Turbo J-Pipe offers more air flow into the throttle body and a fully-welded solid design. OE fitment and peace of mind at any boost level. We added two meth bungs for those who are wanting to use water-methanol injection.
Measuring at consistent 3″ ID, this is the largest throttle body j-pipe on the market. You’ll notice an increase in throttle response and a decrease in turbo lag.
Product Details:
Fitment:
| CTS Turbo is excited to announce the release of the B9 Audi S4/S5 3.0T TFSI charge pipe upgrade kit. Factory pipe that connects intercooler to the throttle body is made of brittle plastic. It’s wise to replace it with an all-aluminum high flowing CTS Turbo charge pipe.
Our 2.5″ charge pipe kit will increase flow and improve the reliability of your B9 Audi S4/S5. You’ll notice an increase in throttle response and a decrease in turbo lag.
Two water/methanol bungs provide an easy way to install injection nozzles.
Product Details
| At CTS Turbo we are proud to announce our new intercooler charge pipes for the B9 Audi A4, A5, AllRoad 1.8T/2.0T.
The OEM charge piping uses a rubber hose as turbo outlet connection and plastic cold-side pipes with a flow-impeding “resonator”. Factory piping is not optimized for performance; so we had to step in and make our charge pipe set of 2.5″ aluminum mandrel-bent tube. Our parts replace soft turbo outlet hose and the small resonated plastic throttle body pipe.
All of the components included in the CTS charge pipe set work flawlessly together to provide increased efficiency, horsepower and torque throughout the entire power-band. By removing the restricting resonator on the cold-side piping, you can enjoy a slight increase in turbo sound!
Product Details:
| CTS Turbo is proud to release our high flow Turbo Muffler delete for 1.8T and 2.0T engines equipped with IHI Turbochargers (see application guide below). This is another original product brought to you by our engineers and in-house fabrication team.
The CTS Turbo Muffler delete is a one-piece design, made using precision CAD tools and is CNC machining in house. Cast from 6061 aircraft grade aluminum.
Our Turbo Muffler delete replaces the restrictive, power robbing OEM Turbo Muffler, which is designed to reduce turbocharger harmonic noise.
Our kit installs in 30 minutes with standard hand tools and fits perfectly.
For those of you that want optimal power and boost response, this TMD is your answer.
Features:
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|
Related products
Copyright 2023 © VagLogic Designed by Sunwin Solutions SG
Reviews
There are no reviews yet.