Brand

The Turbo Engineer
Make

Audi, RS3, TTRS
Model Year

2015, 2016, 2017, 2018, 2019, 2020

THE TURBO SYSTEM TTE700 EVO EA855 2.5 TFSI UPGRADE TURBOCHARGER -SW10032.1

SKU: SW10032.1
In Stock

د.إ18,600.00

Upon placing the order, we will get in touch with you to confirm the availability information.

For Instant Enquiry and More Details, Please Click Here

In Stock
Add to Wishlist
Add to Wishlist

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist
Low Prices

Price match guarantee

Guaranteed Fitment.

Always the correct part

In-House Experts.

We know our products

Wide Product Selection

Endless Possibilities

Category:

Description

TTE700 EVO UPGRADE TURBOCHARGER FOR RS3 8V.2 & 8Y / TTRS 8S DAZA, DNWA, DNWC

A TTE700 Is an original RS3 8V.2/TTRS 8S turbocharger that we the THETURBOENGINEERS Rework to make amazing performance yet still plug & play fitting with an upgrade inlet. To make a TTE700 the compressor wheel is exchanged for a TTE milled aluminum wheel with state-of-the-art geometry, 7+7 blade, and of a much larger size, so producing extra power. Equally, we change the original exhaust turbine for a far larger but very lightweight 9 blade TTE designed the turbine for lower exhaust gas backpressure giving greater performance. We also fitted a TTE motorsport upgrade bearing system for durability. Boost response as always is focused on when we were designing this unit and it does not disappoint.

If ordering new, we use the latest generation of BorgWarner original turbochargers with the latest spec Audi thermal heat isolation shielding on the exhaust manifold & turbine housing to lower engine bay temperatures and ensure the best performance and safety.

Please note if you send an older generation turbo, without the original AUDI thermal shielding for the “upgrade” process, we will rework your turbo and return without the shielding, unless you buy the extra thermal Isolation process.  Depending on stock availability we may substitute TTE thermal shielding and give AUDI original thermal shielding instead. 

Equilibrium

Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled and then the CHRA are dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with a serial numbered balance test result document.

Features :  

  • TTE Billet Milled 7+7 Blade, 63mm Inlet compressor
  • TTE 9 Blade High-flow Low-mass turbine
  • TTE Upgrade bearing pack
  • Genuine BorgWarner Turbocharger as the base part
  • Genuine BorgWarner actuator
  • Thermally shielded exhaust manifold and housing
  • CNC Optimized Compressor Cover Machining Clearances
  • Plug and Play Installation
  • 600+ depending on fuel (link here for required upgrade injectors)
  • Single parts finely balanced then components assembled and core high-speed VSR balanced
  • Supplied with a balance test result document
  • Software recalibration is required
  • Proven TheTurboEngineers quality
  • Made in Germany

From time to time when buying new, we might supply the upgrade TTE thermal isolation free of charge if AUDI OEM heat shielded units are not avalible.

 

Make Model Submodel Engine
Audi 8S TTRS Quattro 2.5T
Audi RS3 8V (2018+) 2.5T

 

Additional information

Brand

The Turbo Engineer
Make

Audi, RS3, TTRS
Model Year

2015, 2016, 2017, 2018, 2019, 2020

Reviews

There are no reviews yet.

Be the first to review “THE TURBO SYSTEM TTE700 EVO EA855 2.5 TFSI UPGRADE TURBOCHARGER -SW10032.1”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsTHE TURBO SYSTEM TTE700 EVO EA855 2.5 TFSI UPGRADE TURBOCHARGER -SW10032.1 removeRACINGLINE R600 Hi-Flow TURBO INLET ELBOW FOR EA888 Gen3 2.0 TSI - VWR12G7R600ITINLET removeRACINGLINE TURBO MUFFLER DELETE FOR 2.0 TSI GOLF R, GTI, AUDI S3, TT for EA888.3 - VWR16 G7DEL removeCTS TURBO THROTTLE BODY INLET KIT FOR 8V.2/8S AUDI RS3/TT-RS (2018-2020) -CTS-IT-932 removeCTS TURBO B9 AUDI SQ5 3.0T CHARGE PIPE -CTS-IT-294 removeCTS TURBO B8/B8.5 AUDI A4/A5/ALLROAD/Q5 2.0T CHARGE PIPE -CTS-IT-267 remove
NameTHE TURBO SYSTEM TTE700 EVO EA855 2.5 TFSI UPGRADE TURBOCHARGER -SW10032.1 removeRACINGLINE R600 Hi-Flow TURBO INLET ELBOW FOR EA888 Gen3 2.0 TSI - VWR12G7R600ITINLET removeRACINGLINE TURBO MUFFLER DELETE FOR 2.0 TSI GOLF R, GTI, AUDI S3, TT for EA888.3 - VWR16 G7DEL removeCTS TURBO THROTTLE BODY INLET KIT FOR 8V.2/8S AUDI RS3/TT-RS (2018-2020) -CTS-IT-932 removeCTS TURBO B9 AUDI SQ5 3.0T CHARGE PIPE -CTS-IT-294 removeCTS TURBO B8/B8.5 AUDI A4/A5/ALLROAD/Q5 2.0T CHARGE PIPE -CTS-IT-267 remove
Image
SKUSW10032.1VWR12G7R600ITINLETVWR16G7TDELCTS-IT-932CTS-IT-294CTS-IT-267
Rating
Priceد.إ18,600.00د.إ600.00د.إ500.00د.إ1,740.00د.إ1,260.00د.إ740.00
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

DescriptionUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereThis product will be in stock and available for purchase.  This product will be in stock and available for purchase.  Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here
Content

TTE700 EVO UPGRADE TURBOCHARGER FOR RS3 8V.2 & 8Y / TTRS 8S DAZA, DNWA, DNWC

A TTE700 Is an original RS3 8V.2/TTRS 8S turbocharger that we the THETURBOENGINEERS Rework to make amazing performance yet still plug & play fitting with an upgrade inlet. To make a TTE700 the compressor wheel is exchanged for a TTE milled aluminum wheel with state-of-the-art geometry, 7+7 blade, and of a much larger size, so producing extra power. Equally, we change the original exhaust turbine for a far larger but very lightweight 9 blade TTE designed the turbine for lower exhaust gas backpressure giving greater performance. We also fitted a TTE motorsport upgrade bearing system for durability. Boost response as always is focused on when we were designing this unit and it does not disappoint.

If ordering new, we use the latest generation of BorgWarner original turbochargers with the latest spec Audi thermal heat isolation shielding on the exhaust manifold & turbine housing to lower engine bay temperatures and ensure the best performance and safety.

Please note if you send an older generation turbo, without the original AUDI thermal shielding for the "upgrade" process, we will rework your turbo and return without the shielding, unless you buy the extra thermal Isolation process.  Depending on stock availability we may substitute TTE thermal shielding and give AUDI original thermal shielding instead. 

Equilibrium

Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled and then the CHRA are dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with a serial numbered balance test result document.

Features :  

  • TTE Billet Milled 7+7 Blade, 63mm Inlet compressor
  • TTE 9 Blade High-flow Low-mass turbine
  • TTE Upgrade bearing pack
  • Genuine BorgWarner Turbocharger as the base part
  • Genuine BorgWarner actuator
  • Thermally shielded exhaust manifold and housing
  • CNC Optimized Compressor Cover Machining Clearances
  • Plug and Play Installation
  • 600+ depending on fuel (link here for required upgrade injectors)
  • Single parts finely balanced then components assembled and core high-speed VSR balanced
  • Supplied with a balance test result document
  • Software recalibration is required
  • Proven TheTurboEngineers quality
  • Made in Germany

From time to time when buying new, we might supply the upgrade TTE thermal isolation free of charge if AUDI OEM heat shielded units are not avalible.

 
Make Model Submodel Engine
Audi 8S TTRS Quattro 2.5T
Audi RS3 8V (2018+) 2.5T
 
THIN-WALL 2.0 TSI TURBO 90 INLET.
The 2.0 TSI Turbo Inlet is an essential addition to your airflow package - ultra-thin-wall, double O-ring flow from intake straight into turbo.
WHAT THE 2.0 TSI TURBO INLET DOES.

A simple fitment, the ultra-thin-wall VWR High-Flow Turbo 90 Inlet is a large diameter, free flowing intake elbow, delicately CNC machined from aluminium billet to replace the small and restrictive plastic factory inlet.

  • The factory inlet forces the airflow to taper right down to pass through a tight and restrictive bend - in other words, terrible for flow. 
  • The RacingLine Turbo 90 is the thinnest-wall construction on the market for highest flow. Twin O-rings ensure the perfect seal. Some of our rivals' less carefully-machined, or even thick cast versions rob valuable airflow.
  • Put simply, without it, you’re wasting much of the potential of your high-flow intake system without fitting the Turbo 90. An essential upgrade!
CONFIRMED APPLICATIONS
>
VW Golf 7 & 7.5 GTI & Clubsport
2013-2020
>
VW Golf 7 & 7.5 R
2013-2020
>
VW Golf 7 & 7.5 1.8 TSI
2013-2020
>
VW Passat 2.0 TSI B8
2015+
>
VW Arteon 2.0 TSI
2017+
>
VW T-Roc R 2.0 TSI
2019+
>
VW Tiguan II 2.0 TSI
2016+
>
VW Jetta / GLI 7
2018+
>
Audi S1 2.0 TFSI
2015-2018
>
Audi A1 2.0 40TFSI GB
2019-2021
>
Audi S3 8V
2013-2020
>
Audi A3 2.0 TSI / 1.8 TSI 8V
2013-2020
>
Audi TT 2.0 TSI 8S
2014+
>
Audi TTS 2.0 TSI 8S
2015+
>
Audi SQ2
2018+
>
Audi Q3 45 TFSI 2.0 TSI
2018+
TURBO MUFFLER DELETE For VWG 2.0 TSI EA888 gen.3
A smooth, turbulence-free air path exiting your turbo with the RacingLine 2.0 TSI Turbo Muffler Delete.
For MQB-platform car using the 1.8T and 2.0T EA888 TSI Engines with the IHI IS20 or IS38 turbo.
WHAT THE TURBO MUFFLER DELETE DOES.

Our Turbo Muffler Delete is a sleek single billet design which replaces the restrictive, power-robbing compressor outlet with a smooth, turbulence free air path exiting the turbo.

  • The standard part is located on the outlet of the turbo compressor and is simply designed to reduce engine bay acoustics.
  • Whilst it subdues the harmonic noises generated by the turbo, it also adds in disruptive turbulence to the airflow right where you don't want it.  
  • By replacing the standard part with our maximum diameter Turbo Muffler Delete, you’ll replace this unwanted restriction with a smooth CFD-developed uninterrupted air path. 
  • The result: noticeably better boost response giving a little more power and throttle reaction, all the while being able to actually hear your turbo working.
CONFIRMED APPLICATIONS
>
VW Golf 7 & 7.5 GTI & Clubsport
2013-2020
>
VW Golf 7 & 7.5 R
2013-2020
>
VW Golf 7 & 7.5 1.8 TSI
2013-2020
>
VW Passat 2.0 TSI B8
2015+
>
VW Arteon 2.0 TSI
2017+
>
VW T-Roc R 2.0 TSI
2019+
>
VW Tiguan II 2.0 TSI
2016+
>
VW Jetta / GLI 7
2018+
>
Audi S1 2.0 TFSI
2015-2018
>
Audi S3 8V
2013-2020
>
Audi A3 2.0 TSI / 1.8 TSI 8V
2013-2020
>
Audi TT 2.0 TSI 8S
2014+
>
Audi TTS 2.0 TSI 8S
2015+
>
Audi SQ2
2018+
>
Audi Q3 45 TFSI 2.0 TSI
2018+
Now fully compatible with all 2018-2020 Audi RS3/TTRS 2.5T DAZA and DNWA engines, this is one kit to fit them all! CTS Turbo is proud to announce our improved 8V, 8V.2/8S Audi RS3/TTRS Throttle Body Inlet Kit for DAZA and DNWA Our high flow throttle body inlet is designed it to be larger, but also more aerodynamic than the stock part. Our inlet has a 56% internal volume increase over the stock inlet. Using the latest CAD software, the shape of the inlet tract was flow optimized and cast from aluminum for best performance. All critical parts were CNC machined to ensure perfect fitment and performance. We have also included our machined throttle body spacer from with two additional ports for boost reference and methanol injection; as well and a high-flow 2.75″ throttle inlet pipe. Custom-made silicone couplers and t-bolt clamps allow for seamless, easy installation. Features:
  • CAD optimized for maximum flow, 56% larger than factory
  • Cast aluminum throttle body elbow, billet aluminum spacer
  • CNC machined in house for perfect fitment
  • Direct replacement for factory parts between the cold side of the intercooler and the throttle body
  • HP gain of up to 20hp on stock turbo, even more with big turbo upgrades
  • Compatible with factory intake, CTS Turbo intakes and most other popular intakes (not compatible with Eventuri intake)
  • Compatible with factory and aftermarket intercoolers
  • Includes a large-bore 2.75″ charge pipe and custom silicone couplers
  • Two extra 1/8″ NPT bungs on the charge pipe for watermeth nozzles
  • Compatible with 1-bolt and 2-bolt pressure sensors
  • DV flange is based on factory design
  • Includes hoses and fittings to install on 2019+ DNWA engines
Fitment:
  • 8V and 8V.2 Audi RS3 (2018-2020) – DAZA and DNWA models
  • 8S Audi TT-RS (2018-2020) – DAZA and DNWA models
Old part number: CTS-HW-373-KIT, CTS-HW-373
Make Model Year Generation
AUDI RS3 2018 - 2020 8V
AUDI TTRS 2018 - 2020 8S
CTS Turbo is excited to announce the release of the B9 Audi SQ5 3.0T TFSI charge pipe upgrade kit. Factory pipe that connects the intercooler to the throttle body is made of brittle plastic. It’s wise to replace it with an all-aluminum high flowing CTS Turbo charge pipe. Our 2.5″ charge pipe kit will increase flow and improve the reliability of your B9 Audi SQ5. You’ll notice an increase in throttle response and a decrease in turbo lag. Two water/methanol bung provide an easy way to install injection nozzle. Product Details
  • 2.5″ mandrel-bent aluminum piping
  • Billet throttle body inlet adapter
  • Precision CNC machined MAP sensor flange
  • Robust Black Powdercoated Finish
  • 4 ply silicon connector
  • Stainless Steel Clamps
  • 2 x 1/8″ NPT Water-Methanol Bung with plug
  • Compatible with factory and CTS Turbo intercoolers (may be compatible with other aftermarket intercoolers)
FITMENT:
    • B9/B9.5 2018-2023 SQ5 3.0T
Make Model Year Generation
AUDI SQ5 2018 - 2020 B9
AUDI SQ5 2021 B9.5
AUDI SQ5 2022 - 2023 B9
CTS Turbo is proud to introduce high-flow charge pipe upgrade for 2.0TFSI Audi A4/A5/Allroad and Q5. This aluminum pipe will replace a restrictive plastic charged air pressure pipe located on the left side on the vehicle. It removes the factory “air charge pulsation damper” for maximum flow and sound! Our charge pipe allows for easy installation of water-methanol injection via integrated 1/8″ NPT bung. Features:
  • 2.5″ mandrel bent aluminum construction
  • CNC machined MAP sensor bung
  • 1/8″ NPT bung for water/meth injection nozzle
  • Black powdercoat for long lasting finish
  • Direct replacement for OE pressure pipe: 8K0145673AJ
  • Compatible with factory or aftermarket intercooler hoses
Fitment
  • 2009-2016 Audi B8/B8.5 All-Road 2.0T
  • 2009-2016 Audi B8/B8.5 A4 FWD 1.8T – ROW Market
  • 2009-2016 Audi B8/B8.5 A4 2.0T
  • 2009-2016 Audi B8/B8.5 A5 2.0T
  • 2008-2017 Audi 8R Q5 2.0T
Not for late 2016+ ROW B8.5 Audi A4/A5 with Gen3 engines.
Make Model Year Generation
AUDI A4 2009 - 2016 B8/8.5
AUDI A5 2009 - 2016 B8/8.5
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Brand

The Turbo Engineer
Make

Audi, RS3, TTRS
Model Year

2015, 2016, 2017, 2018, 2019, 2020
Brand

Racingline
Make

A1, A3, Audi, Golf GTI, Golf R, Q3, S1, S3, SQ2, TT, TTS, Volkswagen
Model Year

2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Brand

Racingline
Make

A3, Audi, Golf GTI, Golf R, Q3, S3, SQ2, TT, TTS, Volkswagen
Model Year

2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Brand

CTS Turbo
Make

Audi, RS3, TTRS
Model Year

2018, 2019, 2020
Brand

CTS Turbo
Make

Audi, SQ5
Model Year

2018, 2019, 2020, 2021, 2022, 2023
Brand

CTS Turbo
Make

A4, A5, Audi
Model Year

2011, 2012, 2013, 2014, 2015, 2016