RACINGLINE TURBO INLET ELBOW FOR 2.0 TSI EA888.4 EVO Engine 300PS/310PS/320PS GOLF 8 R, GOLF 8 GTI CLUBSPORT, AUDI S3 8Y – VWR120010

SKU: VWR120010
In Stock

د.إ1,320.00

Upon placing the order, we will get in touch with you to confirm the availability information.

For Instant Enquiry and More Details, Please Click Here

In Stock
Add to Wishlist
Add to Wishlist

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist
Low Prices

Price match guarantee

Guaranteed Fitment.

Always the correct part

In-House Experts.

We know our products

Wide Product Selection

Endless Possibilities

Category:

Description

FOR 2.0TSI EA888.4 ‘HIGHER OUTPUT’ 300/310/320PS (CONTINENTAL TURBO)

Release power with the 2.0 TSI gen 4 Turbo Inlet System. A significantly enlarged airflow path from intake straight into turbo.

For the Continental turbo (higher output) 300/310/320PS engines such as Golf 8 R, Golf 8 GTI CS, Audi S3 8Y.

WHAT THE TURBO INLET SYSTEM DOES.

Our new Turbo Inlet System for the 300-320PS MQB ‘EVO’ cars such as Golf 8R, GTI CS, Audi S3 8Y etc is a matched package of our much larger diameter, free flowing Turbo 90 Inlet paired with reinforced Silicone Turbo Inlet Hose for much higher airflow between intake and turbo.

  • The factory inlet forces the airflow to pass through the restrictive plastic ‘bellows’ pipe, before tapering right down to run through a tight and restrictive plastic turbo inlet – in other words, terrible for flow. 
  • The RacingLine Turbo Inlet System replaces this pipework with a larger diameter smooth-flowing silicon hose mated to a larger diameter thin-wall free flowing intake elbow.
  • The internal diameter of the Turbo 90 Inlet is massively increased from 74mm on the factory part right up to 84mm.
  • It’s by combining the two parts of the kit that’s allowed us to enlarge the diameter of both the Inlet and the Hose so much – and so give the maximum possible gains.
  • Put simply, without it, you’re wasting much of the potential of your high-flow intake system without fitting this Turbo Inlet System. An essential upgrade!
CONFIRMED APPLICATIONS
>
VW Golf 8 GTI Clubsport
2020+
>
VW Golf 8 R
2020+
>
VW Arteon R 2.0 TSI 320ps
2020+
>
VW T-Roc R 2.0 TSI EA888.4
2021+
>
Audi S3 8Y
2020+
>
Audi SQ2 (facelift EA888.4)
2021+

Additional information

Brand

Racingline

Make

Audi, Golf GTI, Golf R, S3, SQ2, Volkswagen

Model Year

2020, 2021, 2022, 2023

Reviews

There are no reviews yet.

Be the first to review “RACINGLINE TURBO INLET ELBOW FOR 2.0 TSI EA888.4 EVO Engine 300PS/310PS/320PS GOLF 8 R, GOLF 8 GTI CLUBSPORT, AUDI S3 8Y – VWR120010”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsRACINGLINE TURBO INLET ELBOW FOR 2.0 TSI EA888.4 EVO Engine 300PS/310PS/320PS GOLF 8 R, GOLF 8 GTI CLUBSPORT, AUDI S3 8Y - VWR120010 removeTHE TURBO SYSTEM TTE700 EVO EA855 2.5 TFSI UPGRADE TURBOCHARGER -SW10032.1 removeCTS TURBO B8/B8.5 AUDI A4/A5/ALLROAD/Q5 2.0T CHARGE PIPE -CTS-IT-267 removeCTS TURBO MK6 GOLF R TURBO OUTLET PIPE (TOP) -CTS-IT-110 removeCTS TURBO AUDI/VW 7-SPEED DSG/S-TRONIC DQ381 TURBO OUTLET PIPE (MK7.5, 8V.2, 8S.2) -CTS-IT-277 removeRACINGLINE TURBO MUFFLER DELETE FOR 2.0 TSI GOLF R, GTI, AUDI S3, TT for EA888.3 - VWR16 G7DEL remove
NameRACINGLINE TURBO INLET ELBOW FOR 2.0 TSI EA888.4 EVO Engine 300PS/310PS/320PS GOLF 8 R, GOLF 8 GTI CLUBSPORT, AUDI S3 8Y - VWR120010 removeTHE TURBO SYSTEM TTE700 EVO EA855 2.5 TFSI UPGRADE TURBOCHARGER -SW10032.1 removeCTS TURBO B8/B8.5 AUDI A4/A5/ALLROAD/Q5 2.0T CHARGE PIPE -CTS-IT-267 removeCTS TURBO MK6 GOLF R TURBO OUTLET PIPE (TOP) -CTS-IT-110 removeCTS TURBO AUDI/VW 7-SPEED DSG/S-TRONIC DQ381 TURBO OUTLET PIPE (MK7.5, 8V.2, 8S.2) -CTS-IT-277 removeRACINGLINE TURBO MUFFLER DELETE FOR 2.0 TSI GOLF R, GTI, AUDI S3, TT for EA888.3 - VWR16 G7DEL remove
Image
SKUVWR120010SW10032.1CTS-IT-267CTS-IT-110CTS-IT-277VWR16G7TDEL
Rating
Priceد.إ1,320.00د.إ18,600.00د.إ740.00د.إ1,200.00د.إ950.00د.إ500.00
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

DescriptionUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereThis product will be in stock and available for purchase.  
Content

FOR 2.0TSI EA888.4 'HIGHER OUTPUT' 300/310/320PS (CONTINENTAL TURBO)

Release power with the 2.0 TSI gen 4 Turbo Inlet System. A significantly enlarged airflow path from intake straight into turbo.

For the Continental turbo (higher output) 300/310/320PS engines such as Golf 8 R, Golf 8 GTI CS, Audi S3 8Y.

WHAT THE TURBO INLET SYSTEM DOES.

Our new Turbo Inlet System for the 300-320PS MQB 'EVO' cars such as Golf 8R, GTI CS, Audi S3 8Y etc is a matched package of our much larger diameter, free flowing Turbo 90 Inlet paired with reinforced Silicone Turbo Inlet Hose for much higher airflow between intake and turbo.

  • The factory inlet forces the airflow to pass through the restrictive plastic 'bellows' pipe, before tapering right down to run through a tight and restrictive plastic turbo inlet - in other words, terrible for flow. 
  • The RacingLine Turbo Inlet System replaces this pipework with a larger diameter smooth-flowing silicon hose mated to a larger diameter thin-wall free flowing intake elbow.
  • The internal diameter of the Turbo 90 Inlet is massively increased from 74mm on the factory part right up to 84mm.
  • It's by combining the two parts of the kit that's allowed us to enlarge the diameter of both the Inlet and the Hose so much - and so give the maximum possible gains.
  • Put simply, without it, you’re wasting much of the potential of your high-flow intake system without fitting this Turbo Inlet System. An essential upgrade!
CONFIRMED APPLICATIONS
>
VW Golf 8 GTI Clubsport
2020+
>
VW Golf 8 R
2020+
>
VW Arteon R 2.0 TSI 320ps
2020+
>
VW T-Roc R 2.0 TSI EA888.4
2021+
>
Audi S3 8Y
2020+
>
Audi SQ2 (facelift EA888.4)
2021+

TTE700 EVO UPGRADE TURBOCHARGER FOR RS3 8V.2 & 8Y / TTRS 8S DAZA, DNWA, DNWC

A TTE700 Is an original RS3 8V.2/TTRS 8S turbocharger that we the THETURBOENGINEERS Rework to make amazing performance yet still plug & play fitting with an upgrade inlet. To make a TTE700 the compressor wheel is exchanged for a TTE milled aluminum wheel with state-of-the-art geometry, 7+7 blade, and of a much larger size, so producing extra power. Equally, we change the original exhaust turbine for a far larger but very lightweight 9 blade TTE designed the turbine for lower exhaust gas backpressure giving greater performance. We also fitted a TTE motorsport upgrade bearing system for durability. Boost response as always is focused on when we were designing this unit and it does not disappoint.

If ordering new, we use the latest generation of BorgWarner original turbochargers with the latest spec Audi thermal heat isolation shielding on the exhaust manifold & turbine housing to lower engine bay temperatures and ensure the best performance and safety.

Please note if you send an older generation turbo, without the original AUDI thermal shielding for the "upgrade" process, we will rework your turbo and return without the shielding, unless you buy the extra thermal Isolation process.  Depending on stock availability we may substitute TTE thermal shielding and give AUDI original thermal shielding instead. 

Equilibrium

Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled and then the CHRA are dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with a serial numbered balance test result document.

Features :  

  • TTE Billet Milled 7+7 Blade, 63mm Inlet compressor
  • TTE 9 Blade High-flow Low-mass turbine
  • TTE Upgrade bearing pack
  • Genuine BorgWarner Turbocharger as the base part
  • Genuine BorgWarner actuator
  • Thermally shielded exhaust manifold and housing
  • CNC Optimized Compressor Cover Machining Clearances
  • Plug and Play Installation
  • 600+ depending on fuel (link here for required upgrade injectors)
  • Single parts finely balanced then components assembled and core high-speed VSR balanced
  • Supplied with a balance test result document
  • Software recalibration is required
  • Proven TheTurboEngineers quality
  • Made in Germany

From time to time when buying new, we might supply the upgrade TTE thermal isolation free of charge if AUDI OEM heat shielded units are not avalible.

 
Make Model Submodel Engine
Audi 8S TTRS Quattro 2.5T
Audi RS3 8V (2018+) 2.5T
 
CTS Turbo is proud to introduce high-flow charge pipe upgrade for 2.0TFSI Audi A4/A5/Allroad and Q5. This aluminum pipe will replace a restrictive plastic charged air pressure pipe located on the left side on the vehicle. It removes the factory “air charge pulsation damper” for maximum flow and sound! Our charge pipe allows for easy installation of water-methanol injection via integrated 1/8″ NPT bung. Features:
  • 2.5″ mandrel bent aluminum construction
  • CNC machined MAP sensor bung
  • 1/8″ NPT bung for water/meth injection nozzle
  • Black powdercoat for long lasting finish
  • Direct replacement for OE pressure pipe: 8K0145673AJ
  • Compatible with factory or aftermarket intercooler hoses
Fitment
  • 2009-2016 Audi B8/B8.5 All-Road 2.0T
  • 2009-2016 Audi B8/B8.5 A4 FWD 1.8T – ROW Market
  • 2009-2016 Audi B8/B8.5 A4 2.0T
  • 2009-2016 Audi B8/B8.5 A5 2.0T
  • 2008-2017 Audi 8R Q5 2.0T
Not for late 2016+ ROW B8.5 Audi A4/A5 with Gen3 engines.
Make Model Year Generation
AUDI A4 2009 - 2016 B8/8.5
AUDI A5 2009 - 2016 B8/8.5
The CTS Turbo Golf R Turbo Outlet Pipe (TOP) is designed to replace the narrow ‘pancake’ pipe that comes as factory equipment on your vehicle. Our Turbo Outlet Pipe features 2.25″ diameter aluminum tube for optimized flow.  The CNC machined billet mating flange makes connecting this TOP to your FMIC literally a snap.  The billet anodized turbo to TOP connector, 2.25″ coupler and premium clamps top this package off.  If you’re looking for a simple bolt-on modification that will optimize flow and increase power, then this part is for you. Product Details: ·         2.25” Mandrel bent tube ·         CNC machined turbo discharge flange ·         CNC machined FMIC mating flange ·         4-Ply silicon connectors with stainless steel clamps ·         Black powder coated finish ·         Laser cut mounting bracket ·         Designed for fitment on cars with factory K04 turbo This part fits: ·         Any VAG vehicle that is equipped with K04 turbo from the factory (Audi S3 (8P), Audi TT-S (MK2), VW Golf R (MK6), VW GTI ED30 (MK5), VW GTI ED35 (MK6), VW Scirocco R (MK3), Seat Cupra R, etc)
Make Model Year Generation
VW GOLF R 2012 - 2013 MK6
CTS Turbo is pleased to release our high flow turbo outlet pipe for 7-speed DSG MQB vehicles such a MK7.5 VW Golf R and 8V.2 Audi S3 and 8S Audi TT-S.  The factory turbo outlet pipe is constructed from flimsy plastic and is quite narrow, which results in an extreme airflow restriction. The CTS Turbo high flow turbo outlet pipe kit is constructed from mandrel-bent 60mm aluminum tubing. A custom 5-ply silicon coupler makes installation simple! The CTS Turbo high flow turbo outlet pipe kit also replaces all the factory charge piping between the turbocharger compressor housing and factory intercooler. Product Details:
  • 60mm aluminum piping with CTS logo
  • 5-ply silicon coupler
  • Factory mounting points are used for perfect fitment
  • Durable black powdercoat finish
  • For 7-speed DSG/S-tronic transmissions only
  • Compatible with factory and upgraded turbos
  • Compatible with factory and upgraded intakes
  • Compatible with factory and upgraded intercoolers
Parts Included:
  • Upper turbo outlet silicon
  • Lower turbo outlet pipe
  • 2 clamps
  • Installation hardware
Fitment:
  • 2018+ VW Golf R DSG 7-speed
  • 2018+ Audi S3 S-Tronic 7-speed
  • 2018+ Audi TT-S S-Tronic 7-speed
Compatible with vehicles without SAI only.
Make Model Year Generation
AUDI S3 2017 - 2020 8V
AUDI TTS 2018 - 2021 8S
VW GOLF R 2018 - 2020 MK7/7.5
TURBO MUFFLER DELETE For VWG 2.0 TSI EA888 gen.3
A smooth, turbulence-free air path exiting your turbo with the RacingLine 2.0 TSI Turbo Muffler Delete.
For MQB-platform car using the 1.8T and 2.0T EA888 TSI Engines with the IHI IS20 or IS38 turbo.
WHAT THE TURBO MUFFLER DELETE DOES.

Our Turbo Muffler Delete is a sleek single billet design which replaces the restrictive, power-robbing compressor outlet with a smooth, turbulence free air path exiting the turbo.

  • The standard part is located on the outlet of the turbo compressor and is simply designed to reduce engine bay acoustics.
  • Whilst it subdues the harmonic noises generated by the turbo, it also adds in disruptive turbulence to the airflow right where you don't want it.  
  • By replacing the standard part with our maximum diameter Turbo Muffler Delete, you’ll replace this unwanted restriction with a smooth CFD-developed uninterrupted air path
  • The result: noticeably better boost response giving a little more power and throttle reaction, all the while being able to actually hear your turbo working.
CONFIRMED APPLICATIONS
>
VW Golf 7 & 7.5 GTI & Clubsport
2013-2020
>
VW Golf 7 & 7.5 R
2013-2020
>
VW Golf 7 & 7.5 1.8 TSI
2013-2020
>
VW Passat 2.0 TSI B8
2015+
>
VW Arteon 2.0 TSI
2017+
>
VW T-Roc R 2.0 TSI
2019+
>
VW Tiguan II 2.0 TSI
2016+
>
VW Jetta / GLI 7
2018+
>
Audi S1 2.0 TFSI
2015-2018
>
Audi S3 8V
2013-2020
>
Audi A3 2.0 TSI / 1.8 TSI 8V
2013-2020
>
Audi TT 2.0 TSI 8S
2014+
>
Audi TTS 2.0 TSI 8S
2015+
>
Audi SQ2
2018+
>
Audi Q3 45 TFSI 2.0 TSI
2018+
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Brand

Racingline

Make

Audi, Golf GTI, Golf R, S3, SQ2, Volkswagen

Model Year

2020, 2021, 2022, 2023

Brand

The Turbo Engineer

Make

Audi, RS3, TTRS

Model Year

2015, 2016, 2017, 2018, 2019, 2020

Brand

CTS Turbo

Make

A4, A5, Audi

Model Year

2011, 2012, 2013, 2014, 2015, 2016

Brand

CTS Turbo

Make

Golf R, Volkswagen

Model Year

2012, 2013

Brand

CTS Turbo

Make

Audi, Golf R, S3, TTS, Volkswagen

Model Year

2017, 2018, 2019, 2020, 2021

Brand

Racingline

Make

A3, Audi, Golf GTI, Golf R, Q3, S3, SQ2, TT, TTS, Volkswagen

Model Year

2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020