bootmod3 – N13 ECU Tuning for BMW 114i / 116i / 118i / 316i / 320i

bootmod3 N13 ECU tuning is a performance calibration designed for BMW vehicles equipped with the turbocharged N13 four-cylinder engine. The software recalibrates the factory engine control unit through the vehicle’s OBD interface, optimizing boost pressure, ignition timing and fuel delivery to increase horsepower, torque and overall throttle response while maintaining smooth drivability.

The tuning package includes optimized off-the-shelf performance maps designed for different fuel grades and hardware configurations. These calibrations improve engine output and acceleration across the entire RPM range while maintaining factory safety systems and engine protections.

Stage-based calibrations provide noticeable gains in engine performance depending on fuel type and vehicle configuration. Stage 1 and Stage 2 maps are available, including aggressive exhaust burble variants, allowing drivers to select different performance profiles suited to their driving style and vehicle modifications.

Advanced tuning controls allow adjustment of various engine parameters including boost targets, throttle mapping, rev limiter configuration, speed limiter removal and exhaust burble settings. The system also supports custom performance calibrations for vehicles equipped with upgraded hardware such as larger intercoolers, intake systems, downpipes or turbocharger upgrades.

Integrated data logging and engine monitoring functions allow users to analyze numerous engine parameters during operation, helping optimize tuning setups and maintain safe engine performance.

• F22 / F23 (2014+) > 230i
• F22 / F23 (2014+) > 230i xDrive
• F22 / F23 (2014+) > M240i
• F22 / F23 (2014+) > M240i xDrive
• F30 / F31 / F34 (2012-2019) > 330i
• F30 / F31 / F34 (2012-2019) > 330i xDrive
• F30 / F31 / F34 (2012-2019) > 340i
• F30 / F31 / F34 (2012-2019) > 340i xDrive
• F32 / F33 / F36 (2014-2020) > 430i
• F32 / F33 / F36 (2014-2020) > 430i xDrive
• F32 / F33 / F36 (2014-2020) > 440i
• F32 / F33 / F36 (2014-2020) > 440i xDrive

• G20 (2019+) > 330i
• G20 (2019+) > 330i xDrive
• G20 (2019+) > M340i
• G20 (2019+) > M340i xDrive
• G80 (2021+) > M3
• G80 (2021+) > M3 Competition RWD
• G80 (2021+) > M3 xDrive Competition
• G82 / G83 (2021+) > M4
• G82 / G83 (2021+) > M4 Competition RWD
• G82 / G83 (2021+) > M4 xDrive Competition
• G30 (2017+) > 530i
• G30 (2017+) > 530i xDrive
• G30 (2017+) > 540i
• G30 (2017+) > 540i xDrive
• G12 (2016+) > 740i
• G12 (2016+) > 740i xDrive
• G01 X3 (2018+) > X3 M40i
• G01 X3 (2018+) > X3 xDrive30i
• G02 X4 (2019+) > X4 M40i
• G02 X4 (2019+) > X4 xDrive30i
• G05 X5 (2019+) > X5 xDrive40i
• G29 Z4 (2019+) > Z4 M40i
• G29 Z4 (2019+) > Z4 sDrive30i

• A90/A91 (2020+) > Supra 2.0
• A90/A91 (2020+) > Supra 3.0

• F54 (2016+) > Clubman, Clubman S and JCW
• F55 (2015+) > Hatchback/Hardtop (4 door), S and JCW
• F56 (2016+) > Hatchback/Hardtop, S and JCW
• F57 (2016+) > Convertible, Convertible S and JCW
• F60 (2017+) > Countryman, Countryman S, All4 and JCW

bootmod3 B48/B46 ECU tuning is a performance calibration developed for MINI vehicles equipped with the turbocharged B46 and B48 four-cylinder engines. The software recalibrates the factory engine control unit through the vehicle’s OBD interface, optimizing boost pressure, ignition timing and fuel delivery to deliver significant increases in horsepower, torque and throttle response while maintaining smooth drivability.

The tuning package includes a range of optimized off-the-shelf performance maps designed for different fuel grades and hardware configurations. Stage-based calibrations provide noticeable improvements in acceleration and power delivery across the entire RPM range, with gains depending on fuel type and engine compression ratio. High-compression B48 models can achieve up to approximately 54% horsepower and 50% torque increases on Stage 2 calibrations, while low-compression variants also benefit from measurable improvements in both power and torque.

Advanced tuning controls allow modification of various engine parameters including boost targets, throttle sensitivity, exhaust burble configuration, cold-start behavior, rev limiter settings and speed limiter removal. Additional features support flex-fuel calibrations, allowing the engine to adapt to different ethanol fuel blends such as E30, E50 or full E85 when equipped with compatible supporting hardware.

The system also supports custom calibrations for vehicles equipped with upgraded hardware such as larger intercoolers, high-flow downpipes, intake systems or turbocharger upgrades. Extensive engine monitoring and diagnostic data logging allow detailed analysis of engine parameters to assist with performance optimization and safe tuning adjustments.

FEMTO ECU Bench Unlock & Tuning Service

We provide professional FEMTO ECU bench unlock service performed in our garage using certified tools and secure procedures. This is a permanent unlock solution allowing immediate OBD flashing once completed.

Supported Vehicles (MDG1 / DME8 ECUs):
BMW models equipped with B46, B47, B48, B57, B58, S58, N63 and S63 engines.
BMW M models including S58 platforms.
MINI Cooper models with supported ECUs.
Rolls Royce models with supported MDG1 ECUs.
Toyota Supra A90 / A91.
INEOS Grenadier.

Model years may vary depending on ECU type and software version. Please provide your VIN number to confirm compatibility before proceeding.

Pricing:
1 ECU – AED 2300
2 ECUs – AED 4500

Our technical team will review your vehicle details and confirm compatibility before starting the service. For unsupported vehicles or special cases, please contact us directly.

bootmod3 N63TU ECU tuning is a performance calibration developed for BMW vehicles equipped with the twin-turbocharged N63TU V8 engine. The software recalibrates the factory engine control unit through the vehicle’s OBD interface, optimizing boost pressure, ignition timing and fuel delivery to deliver significant improvements in horsepower, torque and throttle response while maintaining factory drivability.

The tuning package includes optimized performance maps designed for different fuel grades and hardware configurations. Stage-based calibrations provide noticeable increases in engine output and stronger acceleration across the entire RPM range depending on fuel type and supporting modifications.

Advanced tuning features allow adjustment of various engine parameters such as boost targets, throttle mapping, rev limiter configuration, speed limiter removal and exhaust burble settings. These controls allow drivers to tailor engine behavior to suit different driving conditions and performance goals.

The system also supports custom performance calibrations for vehicles equipped with upgraded hardware such as high-flow downpipes, larger intercoolers, intake systems or upgraded turbochargers. Integrated data logging and monitoring capabilities provide detailed insight into engine parameters during operation, helping optimize performance and maintain safe engine operation during tuning sessions.