bootmod3 – N63T2 ECU Tuning for BMW M550i / 750i (G-Series)

bootmod3 N63T2 ECU tuning is a performance calibration developed for BMW vehicles equipped with the twin-turbocharged N63T2 V8 engine. The software recalibrates the factory engine control unit through the vehicle’s OBD interface, optimizing boost pressure, ignition timing and fuel delivery to significantly improve horsepower, torque and overall throttle response while maintaining smooth drivability.

The tuning package includes optimized off-the-shelf performance maps designed for different fuel grades and performance setups. Stage-based calibrations provide substantial improvements in acceleration and power delivery across the entire RPM range depending on fuel type and configuration.

Typical performance gains vary depending on the fuel used. Stage 1 calibrations can deliver approximately 14–19% increases in horsepower and up to around 27% torque gains, while Stage 2 calibrations can achieve up to roughly 24–31% horsepower increases and over 30% torque gains when using higher-octane fuels or ethanol blends such as E30.

Advanced tuning controls allow adjustment of various engine parameters including boost targets, throttle mapping, rev limiter settings, speed limiter removal and exhaust burble configuration. The software also supports custom calibrations for vehicles equipped with upgraded hardware such as larger turbochargers, intercoolers, intake systems or high-flow exhaust components.

Additional capabilities include real-time monitoring and detailed data logging of engine parameters, enabling analysis of vehicle performance and helping optimize tuning setups while maintaining safe engine operation.

• F22 / F23 (2014+) > 230i
• F22 / F23 (2014+) > 230i xDrive
• F22 / F23 (2014+) > M240i
• F22 / F23 (2014+) > M240i xDrive
• F30 / F31 / F34 (2012-2019) > 330i
• F30 / F31 / F34 (2012-2019) > 330i xDrive
• F30 / F31 / F34 (2012-2019) > 340i
• F30 / F31 / F34 (2012-2019) > 340i xDrive
• F32 / F33 / F36 (2014-2020) > 430i
• F32 / F33 / F36 (2014-2020) > 430i xDrive
• F32 / F33 / F36 (2014-2020) > 440i
• F32 / F33 / F36 (2014-2020) > 440i xDrive

• G20 (2019+) > 330i
• G20 (2019+) > 330i xDrive
• G20 (2019+) > M340i
• G20 (2019+) > M340i xDrive
• G80 (2021+) > M3
• G80 (2021+) > M3 Competition RWD
• G80 (2021+) > M3 xDrive Competition
• G82 / G83 (2021+) > M4
• G82 / G83 (2021+) > M4 Competition RWD
• G82 / G83 (2021+) > M4 xDrive Competition
• G30 (2017+) > 530i
• G30 (2017+) > 530i xDrive
• G30 (2017+) > 540i
• G30 (2017+) > 540i xDrive
• G12 (2016+) > 740i
• G12 (2016+) > 740i xDrive
• G01 X3 (2018+) > X3 M40i
• G01 X3 (2018+) > X3 xDrive30i
• G02 X4 (2019+) > X4 M40i
• G02 X4 (2019+) > X4 xDrive30i
• G05 X5 (2019+) > X5 xDrive40i
• G29 Z4 (2019+) > Z4 M40i
• G29 Z4 (2019+) > Z4 sDrive30i

• A90/A91 (2020+) > Supra 2.0
• A90/A91 (2020+) > Supra 3.0

• F54 (2016+) > Clubman, Clubman S and JCW
• F55 (2015+) > Hatchback/Hardtop (4 door), S and JCW
• F56 (2016+) > Hatchback/Hardtop, S and JCW
• F57 (2016+) > Convertible, Convertible S and JCW
• F60 (2017+) > Countryman, Countryman S, All4 and JCW

bootmod3 N20/N26 ECU tuning is a performance calibration designed for BMW vehicles equipped with the turbocharged N20 and N26 four-cylinder engines. The software recalibrates the factory engine control unit through the vehicle’s OBD interface, optimizing boost pressure, ignition timing and fuel delivery to increase horsepower, torque and throttle response while maintaining factory drivability.

The tuning package includes optimized performance maps developed for various fuel grades and performance setups. Stage-based calibrations provide noticeable improvements in acceleration and overall power delivery across the entire RPM range. Depending on fuel type and configuration, Stage 1 calibrations can deliver approximately 16–18% horsepower and 20–22% torque gains, while Stage 2 calibrations can reach around 20–22% horsepower and up to 25% torque increases.

Advanced engine tuning controls allow adjustment of key performance parameters including boost targets, throttle mapping, exhaust burble configuration, rev limiter settings and speed limiter removal. Additional features support flex-fuel configurations when paired with a compatible ethanol sensor, allowing the engine calibration to automatically adapt to different ethanol fuel blends.

The system also supports custom performance calibrations for vehicles equipped with upgraded hardware such as larger intercoolers, high-flow downpipes, intake systems or turbocharger upgrades. Integrated data logging and monitoring capabilities allow detailed analysis of engine performance parameters to assist with further optimization and safe operation.

Power gains of up to 100hp on a stock vehicle without the risks of flashing!

JB4 Features & Benefits

Vehicle Fitment

What is a JB4?

The JB4 is a plug & play tune available for turbocharged vehicles. The JB4 tuner installs between your car's sensors and its DME/ECU (computer) and manipulates vehicle performance through these connections making your vehicle much faster. While it's not the only tuning system that operates this way the JB4 separates itself from the competition with much more advanced connection points and processing including CANbus, fuel & spark control, Bluetooth to your smartphone, and a variety of innovative and advanced features not possible with any other system. BMS regularly publishes free mapping and firmware updates adding performance and features as ongoing development allows. In addition, the JB4 system is not VIN-locked to your vehicle and can quickly be removed and swapped between cars or resold at a later time. Often imitated but never duplicated the JB4 has been the gold standard in plug and play turbocharged performance tuning for over a decade.

FEMTO ECU Bench Unlock & Tuning Service

We provide professional FEMTO ECU bench unlock service performed in our garage using certified tools and secure procedures. This is a permanent unlock solution allowing immediate OBD flashing once completed.

Supported Vehicles (MDG1 / DME8 ECUs):
BMW models equipped with B46, B47, B48, B57, B58, S58, N63 and S63 engines.
BMW M models including S58 platforms.
MINI Cooper models with supported ECUs.
Rolls Royce models with supported MDG1 ECUs.
Toyota Supra A90 / A91.
INEOS Grenadier.

Model years may vary depending on ECU type and software version. Please provide your VIN number to confirm compatibility before proceeding.

Pricing:
1 ECU – AED 2300
2 ECUs – AED 4500

Our technical team will review your vehicle details and confirm compatibility before starting the service. For unsupported vehicles or special cases, please contact us directly.