Brand

CTS Turbo
Make

Golf R, Volkswagen
Model Year

2012, 2013

CTS MK6 GOLF R 2.0T DIRECT FIT FMIC KIT -CTS-20T-GR-DF

SKU: CTS-20T-GR-DF
In Stock

د.إ4,210.00

Upon placing the order, we will get in touch with you to confirm the availability information.

For Instant Enquiry and More Details, Please Click Here

In Stock
Add to Wishlist
Add to Wishlist

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist
Low Prices

Price match guarantee

Guaranteed Fitment.

Always the correct part

In-House Experts.

We know our products

Wide Product Selection

Endless Possibilities

Category:

Description

The CTS MK6 2.0T Direct Fit FMIC Kit is designed as a drop in replacement for the OEM front mounted intercooler (FMIC).  That means you can install this kit without any trimming or modification of the bumper.  The OEM FMIC is adequate for stock boost levels, however once boost levels are increased by way of ECU upgrades/chipping the OEM FMIC struggles to keep the charged air temperatures in check.  Higher charged air temperatures can result in boost cut and timing pull, both reducing the amount of power your vehicle produces.

The CTS direct fit FMIC uses a high efficiency bar and plate intercooler core, which aids in reducing pressure drop.  Reducing pressure drop means that your turbo will not have to work as hard to make a given level of boost.  If your turbo makes 30psi of boost pressure in the turbocharger, and your intercooler has a 10psi pressure drop then the boost measured by your ECU would be (30psi – 10psi) = 20psi.  With an efficient FMIC like the CTS direct fit FMIC your turbo does not have to work as hard to reach desired boost levels.  This is beneficial in two ways, the turbo life expectancy is increased due to more efficient operation, and boost leaving the turbocharger is cooler and more dense resulting in more power to the ground.

Product Details:

– Efficient bar and plate construction
– Direct bolt-in installation
– 4-ply silicon hoses and billet adapter to turbo outlet pipe
– High quality stainless steel clamps
– Low pressure drop
– Maintains factory mounting points
– No trimming of bumper or crash supports
– Rated for power levels in excess of 600HP
– Core dimensions: 23.00 Length x 2.00″ Tall x 16.5″ Height
– Cast aluminium end tanks with mounting points that are CAST into the end tank, NOT welded like inferior intercoolers

Fitment:

2012-2013 VW Golf R 2.0T

Make Model Year Generation
VW GOLF R 2012 – 2013 MK6

Additional information

Brand

CTS Turbo
Make

Golf R, Volkswagen
Model Year

2012, 2013

Reviews

There are no reviews yet.

Be the first to review “CTS MK6 GOLF R 2.0T DIRECT FIT FMIC KIT -CTS-20T-GR-DF”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsCTS MK6 GOLF R 2.0T DIRECT FIT FMIC KIT -CTS-20T-GR-DF removeCTS TURBO MK8 GOLF GTI/8Y AUDI A3 TURBO INLET PIPEV -CTS-HW-0513 removeRACINGLINE OIL COOLER SYSTEM 2.0 TSI EA888 Gen.3 ENGINES – VWR18G700 removeCTS TURBO AUDI/VW 6-SPEED MANUAL & DSG/S-TRONIC DQ250 TURBO OUTLET PIPE (GTI/GOLF R/A3/S3/TT) 2015+ MQB MODELS -CTS-IT-275 removeCTS TURBO MK8 GOLF R/ AUDI 8Y S3 TURBO OUTLET PIPE -CTS-IT-956 removeVRSF HD Intercooler Upgrade Kit for 12-18 F20 & F30 228i, M235i, M2, 328i, 335i, 428i, 435i N20 N26 N47 N55 -103030 remove
NameCTS MK6 GOLF R 2.0T DIRECT FIT FMIC KIT -CTS-20T-GR-DF removeCTS TURBO MK8 GOLF GTI/8Y AUDI A3 TURBO INLET PIPEV -CTS-HW-0513 removeRACINGLINE OIL COOLER SYSTEM 2.0 TSI EA888 Gen.3 ENGINES – VWR18G700 removeCTS TURBO AUDI/VW 6-SPEED MANUAL & DSG/S-TRONIC DQ250 TURBO OUTLET PIPE (GTI/GOLF R/A3/S3/TT) 2015+ MQB MODELS -CTS-IT-275 removeCTS TURBO MK8 GOLF R/ AUDI 8Y S3 TURBO OUTLET PIPE -CTS-IT-956 removeVRSF HD Intercooler Upgrade Kit for 12-18 F20 & F30 228i, M235i, M2, 328i, 335i, 428i, 435i N20 N26 N47 N55 -103030 remove
Image
SKUCTS-20T-GR-DFCTS-HW-0513VWR18G700CTS-IT-275CTS-IT-956103030
Rating
Priceد.إ4,210.00د.إ480.00د.إ2,780.00د.إ900.00د.إ980.00د.إ2,150.00
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

Select options

DescriptionUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereThis product will be in stock and available for purchase.  Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here
ContentThe CTS MK6 2.0T Direct Fit FMIC Kit is designed as a drop in replacement for the OEM front mounted intercooler (FMIC).  That means you can install this kit without any trimming or modification of the bumper.  The OEM FMIC is adequate for stock boost levels, however once boost levels are increased by way of ECU upgrades/chipping the OEM FMIC struggles to keep the charged air temperatures in check.  Higher charged air temperatures can result in boost cut and timing pull, both reducing the amount of power your vehicle produces. The CTS direct fit FMIC uses a high efficiency bar and plate intercooler core, which aids in reducing pressure drop.  Reducing pressure drop means that your turbo will not have to work as hard to make a given level of boost.  If your turbo makes 30psi of boost pressure in the turbocharger, and your intercooler has a 10psi pressure drop then the boost measured by your ECU would be (30psi – 10psi) = 20psi.  With an efficient FMIC like the CTS direct fit FMIC your turbo does not have to work as hard to reach desired boost levels.  This is beneficial in two ways, the turbo life expectancy is increased due to more efficient operation, and boost leaving the turbocharger is cooler and more dense resulting in more power to the ground. Product Details: – Efficient bar and plate construction – Direct bolt-in installation – 4-ply silicon hoses and billet adapter to turbo outlet pipe – High quality stainless steel clamps – Low pressure drop – Maintains factory mounting points – No trimming of bumper or crash supports – Rated for power levels in excess of 600HP – Core dimensions: 23.00 Length x 2.00″ Tall x 16.5″ Height – Cast aluminium end tanks with mounting points that are CAST into the end tank, NOT welded like inferior intercoolers Fitment: 2012-2013 VW Golf R 2.0T
Make Model Year Generation
VW GOLF R 2012 - 2013 MK6
CTS Turbo is proud to announce our High-Flow Turbo Inlet made from cast aluminum for the MK8 Golf GTI/8Y Audi A3. Our turbo inlet pipe is compatible with any intake system, be it factory stock or aftermarket. Simple installation takes 10 minutes and can be done using basic hand tools. Upgrade to CTS Turbo High Flow Turbo Inlet and make sure you get the most airflow to your turbo! Product features:
  • Large inside diameter for extremely high flow, perfectly matched to the turbocharger inlet
  • High-density sealing o-ring included
  • Cast aluminum with CNC machined flanges
  • Compatible with any intake system, including stock
  • Simple installation, without any extra parts required
  • Faster turbo spool, more airflow, improved turbo sound!
  • No CEL (check engine light)
Fitment for factory Garrett turbochargers (ROW vehicles may have different years):
  • MK8 Golf GTI EVO4 engine 2021+
  • 8Y Audi A3 EVO4 engine 2022+
NB: not compatible with MK8 VW Golf R or 8Y Audi S3
Make Model Year Generation
AUDI A3 2022 - 2023 8Y
VW GTI 2021 - 2023 MK8

Racingline MQB VW Golf ‘R’/GTI 2.0 TSI OIL COOLER
FOR EA888 gen.3 & gen.4 ENGINES

The higher your power, the harder you drive, the more important it is to protect your oil with this Oil Cooler by RacingLine.
Racingline’s Oil Cooler kit is a complete ready to install package.  An essential for any hard-driven Golf Mk7 GTI or ‘R’ running high power levels, hot climates or on the track. Of course, adding power generates more heat to disperse. Significantly increased oil temperatures mean only one thing: a decrease in the ability for your engine to stay properly lubricated. The new Racingline kit solves this problem: by adding in an additional air to oil cooler positioned right in the airflow in front of the car, oil temperatures are reduced by around 15-20ºc (of course this varies dependent on factors such as how the car is being driven, ambient temperatures and state of tune). Unlike many oil cooler kits, this keeps the factory Oil to Water cooler in position – effectively doubling up on your cooling. As oil passes through the new cooler first, that means less heat transfer back into your car’s water coolant circuit too.

WHY FIT AN OIL COOLER KIT?

Our Oil Cooler Kit is an essential fit for any hard-driven MQB or MQB 'Evo' 2.0 TSI car running high power levels or in hot climates. It's a complete ready to install package, using a clever sandwich plate design for straightforward and reliable installation.

Adding power to these 2.0 TSI engines generates more heat to disperse.  Significantly increased oil temperatures means only one thing: a decrease in the ability for your engine to stay properly lubricated. At the same time, it's really important not to over-cool the oil; our 10-row kit is perfect.

  • Under hard driving, the stock oil cooler is easily overwhelmed. Failures start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade - losing its lubrication properties.
  • The RacingLine kit solves this problem: by adding in an additional air to oil cooler positioned right in the airflow in the front of the car, oil temperatures are reduced by around 15  - 20   degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune).
  • Our kit retains the factory oil to water cooler and adds to it with the front-mounted cooler - doubling up your cooling capability with less heat transfer into the water system.
  • As the oil moves away from the heat inside the engine, its temperature drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.
  • Supplied as a complete kit with every part ready for install.
What’s in the kit?  – Oil Cooler mounting brackets – AN10 ‘210 Series’ Nylon braided feed and return lines – Billet CNC oil cooler sandwich plate – AN10 ’10-Row’ Oil Cooler Core – Billet oil filter housing with removable drop in filter – Fitting kit consisting of all necessary nuts, bolts, washers and rubber mountings
CONFIRMED APPLICATIONS
>
VW Golf 8 GTI
2020+
>
VW Golf 8 GTI Clubsport
2020+
>
VW Golf 8 R
2020+
>
VW Golf 7 & 7.5 GTI & Clubsport
2013-2020
>
VW Golf 7 & 7.5 R
2013-2020
>
VW Golf 7 & 7.5 1.8 TSI
2013-2020
>
VW Passat 2.0 TSI B8
2015+
>
VW Arteon 2.0 TSI
2017+
>
VW T-Roc R 2.0 TSI
2019+
>
VW Tiguan II 2.0 TSI
2016+
>
VW Jetta / GLI 7
2018+
>
Audi S3 8Y
2020+
>
Audi A3 2.0 TSI 8Y
2020+
>
Audi S3 8V
2013-2020
>
Audi A3 2.0 TSI / 1.8 TSI 8V
2013-2020
>
Audi TT 2.0 TSI 8S
2014+
>
Audi TTS 2.0 TSI 8S
2015+
>
Audi SQ2
2018+
CTS Turbo is pleased to release our high flow turbo outlet pipe kit for GTI/Golf R/Golf/GLI/A3/S3/TT 2015+ MQB Models.  The factory turbo outlet pipe is constructed from flimsy plastic and is quite narrow, which results in an extreme airflow restriction. The CTS Turbo high flow turbo outlet pipe kit is constructed from mandrel bent 2.5″ aluminum tubing.  The CTS Turbo high flow turbo outlet pipe kit also replaces all the factory charge piping between the turbocharge compressor housing and factory intercooler. Product Details:
  • Fully compatible with CTS BOSS kits
  • 2.5″ Aluminum piping
  • OEM style pipe bracket
  • High quality tig welds
  • Durable powder coat finish
  • Fits all MQB models (NOT for 7-speed DSG DQ381)
Hardware Included:
  • Upper turbo outlet pipe
  • Lower turbo outlet pipe
  • Silicone coupler
  • 2 x hose clamps
  • Installation hardware
Introducing our high-performance Turbo Outlet Pipe specifically designed for the MK8 Golf R and Audi 8Y S3 models. Engineered to deliver exceptional results, our kit replaces the stock turbo outlet pipe with a more efficient and durable design, resulting in impressive airflow improvements, reduced turbulence, and enhanced overall performance gains. Crafted from mandrel-bent 60mm aluminum tubing, our Turbo Outlet Pipe guarantees optimal airflow without restrictions. This design ensures a smooth and efficient path, allowing the turbocharger to spool up faster and generate increased power. With our custom 5-ply silicone coupler, installation becomes a breeze, providing a hassle-free upgrade experience. We understand the importance of reliability and durability. That’s why our Turbo Outlet Pipe is meticulously engineered using high-quality materials, ensuring long-lasting performance under extreme temperatures and pressures. You can trust our product to withstand the demands of high-performance driving, allowing you to enjoy its benefits for years to come. Upgrade your MK8 Golf R or Audi 8Y S3 with our Turbo Outlet Pipe and unleash the true potential of your vehicle. Experience smoother power delivery and improved performance. Product Details:
  • 60mm aluminum piping with CTS logo
  • 5-ply silicon coupler
  • Factory mounting points are used for perfect fitment
  • Durable black powder coat finish
  • Compatible with factory and upgraded intakes
  • Compatible with factory and upgraded intercooler
Fitment:
  • 2021+ Audi 8Y S3
  • 2021+ MK8 Golf R
Make Model Year Generation
AUDI S3 2021 - 2023 8Y
VW GOLF R 2021 - 2023 MK8

VRSF F Chassis Performance Intercooler Upgrade Kit

for your 2012 – 2016 BMW 228i, M235i, 328i, 335i, 428i & 435i with the N20, N26 & N55 Engine

Replace your inefficient factory intercooler with a VRSF upgraded intercooler kit to get the most out of your N20, N26 & N55 BMW. Our intercoolers are designed to be the best performing, direct bolt on intercoolers available for your BMW with special attention to quality and performance while maintaining a reasonable price. Each VRSF intercooler includes our proprietary High Density fin pack which results in higher HP gains compared to the other guys, mainly due to our incredibly dense internal and external fin pack. Our core was engineered to offer a greater overall surface area for increased heat absorption as well as dissipation.

VRSF HD Intercooler Core

The most important component of any intercooler is the core. The core cools the charged air from the turbo before it enters the engine and the OEM BMW tube and fin intercooler is designed to support low boost levels and air flow. When tuned, airflow and boost levels are increased significantly. This causes the OEM intercooler to heat soak and reduces HP and increases the chance of pre-detonation. We remedy this problem with our proprietary, high density bar and plate intercooler core which utilizes a staggered and offset internal and external fin pack. The VRSF HD core has been carefully balanced to provide the the best intake temperature reduction while maintaining minimal pressure drop. The VRSF HD core is also much more durable than the OEM tube and fin core, with a better ability to withstand rocks and other debris. The VRSF 5″ Performance HD & 6.5″ Competition HD Intercoolers are comprised of an incredibly dense fin pack both internally and externally. It’s not uncommon to see intake temperatures drop at the end of a 3rd gear pull due to the larger overall internal and external surface area. You can expect to see an intake temperature reduction on a stock turbo, full bolt on car during a 3rd gear pull which is why the VRSF HD is THE best option for your N55. Please note that the HD fin pack is now standard at no extra charge! The VRSF 5″ Performance HD is capable of supporting up to 600whp whereas the 6.5″ Competition HD is capable of supporting up to 800whp.

Installation & Construction

We include everything required to replace the OEM intercooler. All VRSF intercoolers feature tabs that allow the retention of the factory fan shroud and our CFD optimized cast end tanks are designed to work with both the OEM intercooler piping as well as any aftermarket charge pipe that adapts to the OEM FMIC. After each intercooler is pressure tested, we then apply a thermal dispersant coating which ensure a leak free experience along with superior protection against the elements. Our intercoolers fit both Left Hand Drive (LHD) & Right Hand Drive (RHD) Models as well as all XI models.

Features

  • Proprietary VRSF HD bar & plate core.
  • CFD optimized cast end tanks.
  • 87% larger than the OEM intercooler.
  • Quick and easy install (less than 1.5 hours)
  • Compatible with both OEM and aftermarket charge pipes.
  • Thermal heat dispersent for added durability.
  • Includes lifetime warranty
This item fits the following N20, N26, N47 & N55 BMWs: 2012 – 2018 F30/F31/F36 BMW 320i & 320xi / 328i & 328xi / 335i & 335xi (Also Fits 316i, 316d, 318d, 320d, 325d, 330d, 335d) 2012 – 2018 F32/F33 BMW 428i & 428xi / 435i & 435xi (Also Fits 420i, 420d, 425d, 430d, 435d) 2014 – 2018 F22/F23 BMW 228i & 228xi / M235i & M235xi (Also Fits 220i, 218d, 220d, 225d) 2012 – 2018 F20/F21 BMW 114i / 116i / 118i / 125i / M135i / 114d / 116d / 118d / 120d / 125d 2016 – 2019 F87 BMW M2 Note: F23/F33 are limited to 5″ Street Only.
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Brand

CTS Turbo
Make

Golf R, Volkswagen
Model Year

2012, 2013
Brand

CTS Turbo
Make

A3, Audi, Golf GTI, Volkswagen
Model Year

2021, 2022, 2023
Brand

Racingline
Make

A3, Audi, Golf GTI, Golf R, S3, SQ2, TT, TTS, Volkswagen
Model Year

2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Brand

CTS Turbo
Make

Audi, Golf GTI, Golf R, S3, Volkswagen
Model Year

2015, 2016, 2017, 2018, 2019
Brand

CTS Turbo
Make

Audi, Golf R, S3, Volkswagen
Model Year

2021, 2022, 2023
Brand

VR Speed Factory
Make

1 Series, 2 Series, 3 Series, 4 Series, BMW, M2
Model Year

2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019