CTS TURBO VW MQB MK8 GTI/GOLF R DIRECT FIT INTERCOOLER -CTS-20T-MK8-DF
د.إ3,900.00
Upon placing the order, we will get in touch with you to confirm the availability information.
For Instant Enquiry and More Details, Please Click Here
In Stock
Did you like this product? Add to favorites now and follow the product.
Add to Wishlist
Add to Wishlist
Description
This is the CTS Turbo Direct-Fit intercooler upgrade for VW MQB MK8 GOLF GTI/GOLF R with updated BLACK finish.
It is important to upgrade your intercooler to keep the AIT low and your car running at it’s best. Heat soak from stock or inferior intercoolers will rob you of performance and could lead to pinging/timing pull.
CTS Turbo premium intercooler upgrade is a direct replacement for your factory intercooler. Our intercooler allows you to keep the charged air cold and keep your power consistent. High flowing core allows for minimal pressure drop and allows air to pass through to the radiator.
Silicone hoses are included!
Features:
- High-density bar-and-plate core with cast end tanks, capable of supporting 600whp.
- Airflow directing fins are cast into the end tanks to help with even air distribution inside the intercooler.
- Fully compatible with Adaptive Cruise Control (ACC) and Frontal Collision Warning system Collision Warning system to be adapted by VW after install).
- One of the largest intercooler cores on the market with complete direct fitment.
- CAD engineered for excellent performance and perfect fitment.
- High-pass core allows outside air to get to radiator without issue.
Fitment:
- 2022 MK8 Golf GTI
- 2022 MK8 Golf R
| Make | Model | Year | Generation |
|---|---|---|---|
| VW | GOLF R | 2022 | MK8 |
| VW | GTI | 2022 | MK8 |
Additional information
| Brand | CTS Turbo |
|---|---|
| Make | Golf GTI, Golf R, Volkswagen |
| Model Year | 2022 |
Be the first to review “CTS TURBO VW MQB MK8 GTI/GOLF R DIRECT FIT INTERCOOLER -CTS-20T-MK8-DF”
Quick Comparison
| Settings | CTS TURBO VW MQB MK8 GTI/GOLF R DIRECT FIT INTERCOOLER -CTS-20T-MK8-DF remove | CTS MK6 GOLF R 2.0T DIRECT FIT FMIC KIT -CTS-20T-GR-DF remove | Forge Motorsport Intercooler for VW Golf MK8/Audi S3 - FMINT24 remove | VRSF HD Intercooler Upgrade Kit for 12-18 F20 & F30 228i, M235i, M2, 328i, 335i, 428i, 435i N20 N26 N47 N55 -103030 remove | AIRTEC MOTORSPORT FRONT MOUNT INTERCOOLER FOR AUDI RS3 8Y - ATINTVAG43 remove | RACINGLINE MQB INTERCOOLER SYSTEM Golf R, S3/TTS – VWR14G700 remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | CTS TURBO VW MQB MK8 GTI/GOLF R DIRECT FIT INTERCOOLER -CTS-20T-MK8-DF remove | CTS MK6 GOLF R 2.0T DIRECT FIT FMIC KIT -CTS-20T-GR-DF remove | Forge Motorsport Intercooler for VW Golf MK8/Audi S3 - FMINT24 remove | VRSF HD Intercooler Upgrade Kit for 12-18 F20 & F30 228i, M235i, M2, 328i, 335i, 428i, 435i N20 N26 N47 N55 -103030 remove | AIRTEC MOTORSPORT FRONT MOUNT INTERCOOLER FOR AUDI RS3 8Y - ATINTVAG43 remove | RACINGLINE MQB INTERCOOLER SYSTEM Golf R, S3/TTS – VWR14G700 remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Image |  |  |  |  |  |  | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| SKU | CTS-20T-MK8-DF | CTS-20T-GR-DF | FMINT24 | 103030 | ATINTVAG43 | VWR14G700 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Price | د.إ3,900.00 | د.إ4,210.00 | د.إ4,190.00 | د.إ2,150.00 | د.إ5,800.00 | د.إ4,200.00 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Stock | In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Availability | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | This product will be in stock and available for purchase. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Content | This is the CTS Turbo Direct-Fit intercooler upgrade for VW MQB MK8 GOLF GTI/GOLF R with updated BLACK finish.
It is important to upgrade your intercooler to keep the AIT low and your car running at it’s best. Heat soak from stock or inferior intercoolers will rob you of performance and could lead to pinging/timing pull.
CTS Turbo premium intercooler upgrade is a direct replacement for your factory intercooler. Our intercooler allows you to keep the charged air cold and keep your power consistent. High flowing core allows for minimal pressure drop and allows air to pass through to the radiator.
Silicone hoses are included!
Features:
| The CTS MK6 2.0T Direct Fit FMIC Kit is designed as a drop in replacement for the OEM front mounted intercooler (FMIC). That means you can install this kit without any trimming or modification of the bumper. The OEM FMIC is adequate for stock boost levels, however once boost levels are increased by way of ECU upgrades/chipping the OEM FMIC struggles to keep the charged air temperatures in check. Higher charged air temperatures can result in boost cut and timing pull, both reducing the amount of power your vehicle produces.
The CTS direct fit FMIC uses a high efficiency bar and plate intercooler core, which aids in reducing pressure drop. Reducing pressure drop means that your turbo will not have to work as hard to make a given level of boost. If your turbo makes 30psi of boost pressure in the turbocharger, and your intercooler has a 10psi pressure drop then the boost measured by your ECU would be (30psi – 10psi) = 20psi. With an efficient FMIC like the CTS direct fit FMIC your turbo does not have to work as hard to reach desired boost levels. This is beneficial in two ways, the turbo life expectancy is increased due to more efficient operation, and boost leaving the turbocharger is cooler and more dense resulting in more power to the ground.
Product Details:
– Efficient bar and plate construction
– Direct bolt-in installation
– 4-ply silicon hoses and billet adapter to turbo outlet pipe
– High quality stainless steel clamps
– Low pressure drop
– Maintains factory mounting points
– No trimming of bumper or crash supports
– Rated for power levels in excess of 600HP
– Core dimensions: 23.00 Length x 2.00″ Tall x 16.5″ Height
– Cast aluminium end tanks with mounting points that are CAST into the end tank, NOT welded like inferior intercoolers
Fitment:
2012-2013 VW Golf R 2.0T
| FMINT24 is a performance intercooler for the MQB platforms with the EA888 GEN4 Engine. Produced, designed, and tested, at our headquarters in Gloucester UK. Throughout the development process we have strived to improve the efficiency and performance of the EA888 GEN4 engine. Our project brief was to develop an intercooler that utilised all of the available space in the original position of the OEM intercooler, and to ensure the inlet air temperature is reduced, without any negative effects on the boost pressure or engine and transmission cooling.
In the MQB chassis the intercooler housing is particularly restricted and confined to a small amount of space, due to it not only housing the intercooler, but also the radiator and air conditioning condenser. The front panel in theory is a sandwich pack that houses the auxiliary cooling components. This means in order to increase the size of the intercooler without paying detriment to the performance of the surrounding items, and with also having very little extra space available, that it can be very difficult to execute the perfect blend of a high flow intercooler within such a close proximity.
Why do we test different cores? Here at Forge Motorsport, when developing an intercooler, we will test several different cores for each application. For example, a bar and plate style core, a tube and fin style core along with different fin pitches and heights, as well as changing the internal fin pitches/shapes and density within the tube; thus enabling us to fine tune the amount of pressure drop the intercooler produces. Pressure drop is not always a bad thing, as our testing and research has proven on various projects. This is because the pressurized air velocity is being stalled by the pressure drop within the cooler thus allowing more time to cool the air within the cooler itself, as air passes through the non-pressurized face of the core, that is open to the atmosphere.
Dyno Results
Testing was completed using Performance Remap in Gloucester with their VTEC 4-wheel drive dynamometer. This was to ensure all our data has been achieved with results as accurately as possible by an independent tuner. As you can see from the dyno results below, peak power was increased from stock by 11bhp and 20nm of torque at 5500RPM with the Forge Motorsport performance intercooler installed.
The best news is that there are significant torque gains throughout the rev range, meaning that the car power will pick up quicker and pull the whole way through to redline, including an impressive gain in BHP from 5000 RPM TO 6500 RPM. Gains on vehicles with re calibrated software and further hardware performance parts can be expected to be a lot higher due to the substantial drop in IATS when FMINT24 is installed.
During our extensive testing, we let the car heat soak on the dyno until the radiator fans tripped on and off (which gives an inlet temperature of around 40°C). We then did a dyno pull from this point which gives a more consistent result and reflects real-world driving conditions more accurately. You can easily see the Forge intercooler cools much quicker and delivers a much greater drop in temperature compared to OEM.
Why do we try to decrease IAT's? (Inlet Air Temperature) Temperature and volume of air supplied to your vehicles engine that is compressed by the turbo charger has a better effect on performance when cool as this is to provide the engine with more oxygen (denser air), thus improving the combustion in each cylinder. In addition, by regulating and reducing the air temperature, it also increases the reliability of an engine by keeping the AFRs (Air Fuel Ratios) in each cylinder at a safe level, which in turn, can increase an engines power due to the air being cooler. A bigger bang is then created within the cylinder, providing the correct amount of fuel is added. This can equate to an increase in BHP and torque.
The Forge Motorsport intercooler is a perfect performance enhancing product that fits directly to the OEM mounting points, making for an easy install, in a relatively short period of time. No cutting of any components is needed, making the installation reversible if the vehicle needs to be returned to stock at any time in the future. The core and end tanks are finished in our black textured anti corrosion coating that also aids with its thermal properties and keeps the product looking that bit stealthier or OEM+.
The Forge Motorsport lifetime warranty on all hardware products shows the trust we have in the quality of our products while they are being enjoyed on your pride and joy.
Compatible Vehicles : | VRSF F Chassis Performance Intercooler Upgrade Kitfor your 2012 – 2016 BMW 228i, M235i, 328i, 335i, 428i & 435i with the N20, N26 & N55 EngineReplace your inefficient factory intercooler with a VRSF upgraded intercooler kit to get the most out of your N20, N26 & N55 BMW. Our intercoolers are designed to be the best performing, direct bolt on intercoolers available for your BMW with special attention to quality and performance while maintaining a reasonable price. Each VRSF intercooler includes our proprietary High Density fin pack which results in higher HP gains compared to the other guys, mainly due to our incredibly dense internal and external fin pack. Our core was engineered to offer a greater overall surface area for increased heat absorption as well as dissipation.VRSF HD Intercooler CoreThe most important component of any intercooler is the core. The core cools the charged air from the turbo before it enters the engine and the OEM BMW tube and fin intercooler is designed to support low boost levels and air flow. When tuned, airflow and boost levels are increased significantly. This causes the OEM intercooler to heat soak and reduces HP and increases the chance of pre-detonation. We remedy this problem with our proprietary, high density bar and plate intercooler core which utilizes a staggered and offset internal and external fin pack. The VRSF HD core has been carefully balanced to provide the the best intake temperature reduction while maintaining minimal pressure drop. The VRSF HD core is also much more durable than the OEM tube and fin core, with a better ability to withstand rocks and other debris. The VRSF 5″ Performance HD & 6.5″ Competition HD Intercoolers are comprised of an incredibly dense fin pack both internally and externally. It’s not uncommon to see intake temperatures drop at the end of a 3rd gear pull due to the larger overall internal and external surface area. You can expect to see an intake temperature reduction on a stock turbo, full bolt on car during a 3rd gear pull which is why the VRSF HD is THE best option for your N55. Please note that the HD fin pack is now standard at no extra charge! The VRSF 5″ Performance HD is capable of supporting up to 600whp whereas the 6.5″ Competition HD is capable of supporting up to 800whp.Installation & ConstructionWe include everything required to replace the OEM intercooler. All VRSF intercoolers feature tabs that allow the retention of the factory fan shroud and our CFD optimized cast end tanks are designed to work with both the OEM intercooler piping as well as any aftermarket charge pipe that adapts to the OEM FMIC. After each intercooler is pressure tested, we then apply a thermal dispersant coating which ensure a leak free experience along with superior protection against the elements. Our intercoolers fit both Left Hand Drive (LHD) & Right Hand Drive (RHD) Models as well as all XI models.Features
| Freshly developed at AIRTEC HQ in the UK, we’re proud to launch our uprated front mount intercooler kit with integrated crash bar design (replaces the stock crash bar) aimed at modified Audi RS3 8Y owners who want the very highest level of cooling efficiency, power and performance for track or fast road use.
Our solution to increasing the intercooler’s size and performance within the confines of the limited space behind the bumper is based upon a much larger taller stepped core design. This offers a huge 108% increase in overall capacity in comparison to the original intercooler, as well as colossal 125% increase in frontal area over standard, which allows it to make the most of the air flow provided. Together with our high-flow, moulded one-piece cast end tanks to ensure flow is directed correctly and efficiently, the AIRTEC Motorsport intercooler offers much greater efficiency and volume over standard and by integrating the crash bar into the design, the intercooler makes full use of the vehicle’s entire front grille area while still retaining the towing eye feature.
Available in a high-quality powder coated black finish, the comprehensive kit is a direct replacement and attaches to the original boost pipes and clips. It comes complete with all fixtures and fittings, as well as detailed fitting instructions.
Its proven cooling efficiency makes it an essential modification for all modified Audi RS3s.
Dimensions:
OEM intercooler:
Width: 640mm
Height: 163mm
Depth: 80mm
Capacity: 8.3 litres
Front area: 1,043cm²
AIRTEC Motorsport intercooler:
Width: 627mm
Height: 375mm
Depth: 100mm to 50mm stepped core
Capacity: 17.3 litres
Front area: 2,351cm²
Features:
|
Delivering lovely cool intake air temperatures for your 2.0 TSI EA888 gen3 MQB car. Again and again and again.The factory intercooler on the MQB-platform cars has proved to be unable to cope with the demands of higher power, hard driven cars, showing up as serious power losses during hard driving as air temperatures soar
WHAT IT DOES?The factory intercooler on the MQB-platform cars has proved to be unable to cope with the demands of higher power, hard driven cars, showing up as serious power losses during hard driving as air temperatures soar.
 MAXIMUM CORE SIZE The massive 'plate & bar' intercooler unit features a high-speed core using extra tall internal tubes for maximum boost flow.  SOPHISTICATED CORE Highly effective aluminium plate & bar construction, developed following rigorous testing to optimise core dimensions, fin density, and pipe flow.  SMOOTH END TANKS Cast construction for minimal turbulence and restriction delivering maximum flow across the entire core depth. CONFIRMED APPLICATIONSSome trimming to the plastic front panel may required for fitment:
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|
Related products
Recently Viewed Products
Copyright 2023 © VagLogic Designed by Sunwin Solutions SG
Reviews
There are no reviews yet.