Forge Motorsport Intercooler for Audi A4 2.0 TSI 2021- FMINT26
د.إ3,910.00
Upon placing the order, we will get in touch with you to confirm the availability information.
For Instant Enquiry and More Details, Please Click Here
In Stock
Did you like this product? Add to favorites now and follow the product.
Add to Wishlist
Add to Wishlist
Description
- Hand fabricated in the UK
- Stepped core design
- 139% capacity increase over the OEM intercooler
- Gains of 5bhp (see description for more information)
- Gains of up to 10NM (see description for more information)
- Lifetime warranty
FMINT26 is our intercooler upgrade for the Audi A4 TFSI 2020 onwards and replaces the OEM part 8W0 145 805 AD. Our objective as always was to improve and maximise the cooling efficiency to increase the vehicles performance as well as manufacture a product to the highest standard. Utilising our highly skilled CAD team and fabrication department we went to work designing an intercooler which would occupy the original space without the need to modify the vehicle, while at the same time design a product with a greater capacity core for the optimum performance.
Utilising our industry leading bar and plate design alongside Solidworks CAD and flow simulation design (Computational Fluid Dynamics – CFD) to develop a smooth flowing end tank design. The sheet metal construction was chosen to help with heat dissipation along with its weight saving properties. The bar and plate core has over 139% more volume and an increase of frontal surface area over 38% (over the stock cooler). This cleaver design manages to increase volume without any modification to the vehicle, FMINT26 is a direct fit.
We have teamed up with our good friends at Avon Tuning for the development of this project. We used their vehicle and Dimsport 4WD hydraulically linked Dyno for testing. We saw gains of 5bhp of power and 5.2Nm of torque on a vehicle running standard software, but this only tells half the story, it’s where the gains are made that’s most important. From 3000rpm is where the improvements start to happen and consistently grow all the way to the rev limiter. It this area where the TFSI engine feels its weakest in stock form so with the addition our intercooler this is a welcome improvement. Adding Stage one software and an aftermarket exhaust system will really unlock the full potential of the intercooler and the Audis engine power unit. IATs (inlet air temperatures) were logged, and we saw consistent improvement here also.
FMINT26 is finished in our black anti-corrosion powder coating which not only helps preserve this intercooler from harsh environments it also aids its thermal properties and as with all Forge Motorsport fabricated products this intercooler has the legendary Forge Lifetime warranty.
Compatible Vehicles :
Additional information
| Brand | Forge Motorsport |
|---|---|
| Make | A4, Audi |
| Model Year | 2021 |
Be the first to review “Forge Motorsport Intercooler for Audi A4 2.0 TSI 2021- FMINT26”
Quick Comparison
| Settings | Forge Motorsport Intercooler for Audi A4 2.0 TSI 2021- FMINT26 remove | CTS TURBO CHARGE PIPE UPGRADE KIT FOR BMW G20/G29/G05/G07/G11 AND A90 TOYOTA SUPRA B58C 3.0L - CTS-IT-349 remove | Forge Motorsport High Flow Discharge Pipe for 1.8T and 2.0T VAG Engines - FMMK7DP remove | Forge Motorsport Intercooler for VW Golf MK8/Audi S3 - FMINT24 remove | CTS TURBO AUDI/VW 6-SPEED MANUAL & DSG/S-TRONIC DQ250 TURBO OUTLET PIPE (GTI/GOLF R/A3/S3/TT) 2015+ MQB MODELS -CTS-IT-275 remove | CTS TURBO MK7/7.5 THROTTLE PIPE (GTI/GOLF R/GOLF GTI/A3/S3/TT) 2015+ MQB MODELS -CTS-IT-280 remove | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | Forge Motorsport Intercooler for Audi A4 2.0 TSI 2021- FMINT26 remove | CTS TURBO CHARGE PIPE UPGRADE KIT FOR BMW G20/G29/G05/G07/G11 AND A90 TOYOTA SUPRA B58C 3.0L - CTS-IT-349 remove | Forge Motorsport High Flow Discharge Pipe for 1.8T and 2.0T VAG Engines - FMMK7DP remove | Forge Motorsport Intercooler for VW Golf MK8/Audi S3 - FMINT24 remove | CTS TURBO AUDI/VW 6-SPEED MANUAL & DSG/S-TRONIC DQ250 TURBO OUTLET PIPE (GTI/GOLF R/A3/S3/TT) 2015+ MQB MODELS -CTS-IT-275 remove | CTS TURBO MK7/7.5 THROTTLE PIPE (GTI/GOLF R/GOLF GTI/A3/S3/TT) 2015+ MQB MODELS -CTS-IT-280 remove | ||||||||||||||||||||||||||||||||||||
| Image |  |  |  |  |  |  | ||||||||||||||||||||||||||||||||||||
| SKU | FMINT26 | CTS-IT-349 | FMMK7DP | FMINT24 | CTS-IT-275 | CTS-IT-280 | ||||||||||||||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||||||||||||||
| Price | د.إ3,910.00 | د.إ1,300.00 | د.إ1,050.00 | د.إ4,190.00 | د.إ900.00 | د.إ950.00 | ||||||||||||||||||||||||||||||||||||
| Stock | In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| ||||||||||||||||||||||||||||||||||||
| Availability | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock | ||||||||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||||||||||||||
| Description | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | ||||||||||||||||||||||||||||||||||||
| Content |
FMINT26 is our intercooler upgrade for the Audi A4 TFSI 2020 onwards and replaces the OEM part 8W0 145 805 AD. Our objective as always was to improve and maximise the cooling efficiency to increase the vehicles performance as well as manufacture a product to the highest standard. Utilising our highly skilled CAD team and fabrication department we went to work designing an intercooler which would occupy the original space without the need to modify the vehicle, while at the same time design a product with a greater capacity core for the optimum performance.
We have teamed up with our good friends at Avon Tuning for the development of this project. We used their vehicle and Dimsport 4WD hydraulically linked Dyno for testing. We saw gains of 5bhp of power and 5.2Nm of torque on a vehicle running standard software, but this only tells half the story, it’s where the gains are made that’s most important. From 3000rpm is where the improvements start to happen and consistently grow all the way to the rev limiter. It this area where the TFSI engine feels its weakest in stock form so with the addition our intercooler this is a welcome improvement. Adding Stage one software and an aftermarket exhaust system will really unlock the full potential of the intercooler and the Audis engine power unit. IATs (inlet air temperatures) were logged, and we saw consistent improvement here also.
FMINT26 is finished in our black anti-corrosion powder coating which not only helps preserve this intercooler from harsh environments it also aids its thermal properties and as with all Forge Motorsport fabricated products this intercooler has the legendary Forge Lifetime warranty.
Compatible Vehicles : | CTS Turbo is proud to announce the release of the high-flow aluminum charge pipe for new generations of B58C engines in G-series BMW 3.0T engines and A90 Toyota Supra 3.0T
The CTS Charge Pipe Kit offers more air flow than a factory pipe, OE-like fitment and peace of mind at any boost level. Our charge pipe kit will also improve the reliability of your B58C engine over the plastic stock part.
You’ll notice an increase in throttle response and a decrease in turbo lag. It’s is a must for vehicles tuned to run higher than stock boost level.
Product Details:
| Designed as a direct replacement for the OEM plastic discharge pipe (Part No. 5Q0145840) used on 1.8T and 2.0T engines found in various VW, Audi, Seat and Skoda models.
Full mandrel bent single piece hard pipe with larger bore size for increased flow. This ensures high amounts of air are discharged from the turbo charger and therefore releasing the full potential of your engines capabilities. Unlike the OEM discharge pipe that is prone to failure from increased boost or many heat cycles, the Forge Motorsport high flow discharge pipe will not crack or fail - ever. This is backed up by our no quibble Lifetime warranty.
.jpg)
In the box:
Hard pipe
Silicone Hose
Hose Clamps
*NOT COMPATIBLE WITH 7-SPEED DSG MODELS
Compatible Vehicles : | FMINT24 is a performance intercooler for the MQB platforms with the EA888 GEN4 Engine. Produced, designed, and tested, at our headquarters in Gloucester UK. Throughout the development process we have strived to improve the efficiency and performance of the EA888 GEN4 engine. Our project brief was to develop an intercooler that utilised all of the available space in the original position of the OEM intercooler, and to ensure the inlet air temperature is reduced, without any negative effects on the boost pressure or engine and transmission cooling.
In the MQB chassis the intercooler housing is particularly restricted and confined to a small amount of space, due to it not only housing the intercooler, but also the radiator and air conditioning condenser. The front panel in theory is a sandwich pack that houses the auxiliary cooling components. This means in order to increase the size of the intercooler without paying detriment to the performance of the surrounding items, and with also having very little extra space available, that it can be very difficult to execute the perfect blend of a high flow intercooler within such a close proximity.
Why do we test different cores? Here at Forge Motorsport, when developing an intercooler, we will test several different cores for each application. For example, a bar and plate style core, a tube and fin style core along with different fin pitches and heights, as well as changing the internal fin pitches/shapes and density within the tube; thus enabling us to fine tune the amount of pressure drop the intercooler produces. Pressure drop is not always a bad thing, as our testing and research has proven on various projects. This is because the pressurized air velocity is being stalled by the pressure drop within the cooler thus allowing more time to cool the air within the cooler itself, as air passes through the non-pressurized face of the core, that is open to the atmosphere.
Dyno Results
Testing was completed using Performance Remap in Gloucester with their VTEC 4-wheel drive dynamometer. This was to ensure all our data has been achieved with results as accurately as possible by an independent tuner. As you can see from the dyno results below, peak power was increased from stock by 11bhp and 20nm of torque at 5500RPM with the Forge Motorsport performance intercooler installed.
The best news is that there are significant torque gains throughout the rev range, meaning that the car power will pick up quicker and pull the whole way through to redline, including an impressive gain in BHP from 5000 RPM TO 6500 RPM. Gains on vehicles with re calibrated software and further hardware performance parts can be expected to be a lot higher due to the substantial drop in IATS when FMINT24 is installed.
During our extensive testing, we let the car heat soak on the dyno until the radiator fans tripped on and off (which gives an inlet temperature of around 40°C). We then did a dyno pull from this point which gives a more consistent result and reflects real-world driving conditions more accurately. You can easily see the Forge intercooler cools much quicker and delivers a much greater drop in temperature compared to OEM.
Why do we try to decrease IAT's? (Inlet Air Temperature) Temperature and volume of air supplied to your vehicles engine that is compressed by the turbo charger has a better effect on performance when cool as this is to provide the engine with more oxygen (denser air), thus improving the combustion in each cylinder. In addition, by regulating and reducing the air temperature, it also increases the reliability of an engine by keeping the AFRs (Air Fuel Ratios) in each cylinder at a safe level, which in turn, can increase an engines power due to the air being cooler. A bigger bang is then created within the cylinder, providing the correct amount of fuel is added. This can equate to an increase in BHP and torque.
The Forge Motorsport intercooler is a perfect performance enhancing product that fits directly to the OEM mounting points, making for an easy install, in a relatively short period of time. No cutting of any components is needed, making the installation reversible if the vehicle needs to be returned to stock at any time in the future. The core and end tanks are finished in our black textured anti corrosion coating that also aids with its thermal properties and keeps the product looking that bit stealthier or OEM+.
The Forge Motorsport lifetime warranty on all hardware products shows the trust we have in the quality of our products while they are being enjoyed on your pride and joy.
Compatible Vehicles : | CTS Turbo is pleased to release our high flow turbo outlet pipe kit for GTI/Golf R/Golf/GLI/A3/S3/TT 2015+ MQB Models. The factory turbo outlet pipe is constructed from flimsy plastic and is quite narrow, which results in an extreme airflow restriction. The CTS Turbo high flow turbo outlet pipe kit is constructed from mandrel bent 2.5″ aluminum tubing. The CTS Turbo high flow turbo outlet pipe kit also replaces all the factory charge piping between the turbocharge compressor housing and factory intercooler.
Product Details:
| CTS Turbo is pleased to offer the ultimate high flow throttle pipe kit for the MQB model range vehicles. The OEM Charge pipping leaves something to be desired with inefficient bends, and blockages not optimized for performance. The CTS Turbo throttle pipe increases the entire diameter to 2.5″ allowing for increased flow and greater performance. The integrated water methanol bung (1/8″ NPT) allows for simple and straight forward installation of kits from Snow Performance. All of the components included in the CTS throttle pipe kit work flawlessly together to provide increased efficiency, horsepower, and torque throughout the entire power band and an aggressive race inspired sound.
Product Details:
| ||||||||||||||||||||||||||||||||||||
| Weight | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|
Related products
Recently Viewed Products
Copyright 2023 © VagLogic Designed by Sunwin Solutions SG
Reviews
There are no reviews yet.