Forge Motorsport Turbo Inlet Adaptor for the VW Golf Mk8 GTI, Audi A1, A3, TT & Cupra – FMTIA6
د.إ900.00
Upon placing the order, we will get in touch with you to confirm the availability information.
For Instant Enquiry and More Details, Please Click Here
In Stock
Did you like this product? Add to favorites now and follow the product.
Add to Wishlist
Add to Wishlist
Description
Suitable for both left and right hand drive – This replaces OEM part number 5WA.129.635
With the success of turbo inlet adaptors for a number of platforms and engine configurations we took the opportunity to further our product range for the VW MK8 GTI. We looked to see if we could improve on the air flow to the turbo charger. On investigation we could see that the OEM turbo adaptor was restrictive and was an area in need for improvement. Therefore, our highly skilled development team got to work designing a solution to maximize the capacity by utilizing our CAD system and physical prototypes.
The OEM plastic turbo inlet includes a ribbed hose that also disturbs the air flow within the inlet tract, this OEM part has a detrimental effect to the engines performance especially when tuned. For the best possible gains, we have included a smooth silicone inlet hose that is included in the kit and meets the forge turbo elbow seamlessly, this product not only enhances the look of your vehicles engine bay the TIA6 inlet elbow and hose increase the volume and air flow significantly, this ensures the transition is as smooth as possible from the inlet tract to the turbo.
Suitable for both left and right hand drive vehicles the turbo elbow is made from cast aluminium and machined to the perfect tolerance to enable a superb fit, this is a product that can be installed in approximately 30 minutes with only a few tools and can easily be accomplished by even the most novice enthusiast.
During independent testing on a stock vehicle we found the throttle response to be increased with a gain of 12NM torque between 2000RPM and 2400RPM while holding noticeable smoother torque figure to just over 3300RPM along with a slight increase of BHP at 5300RPM, These figures can be expected to increase the more the vehicle is tuned and will typically produce a gain of around 7 BHP on stage 1 tuned vehicles this is because at the entry point to the inlet elbow the surface area in increased by 30%.
Combined with our product FMMD6 the turbo charger works more freely and should certainly be considered as one of the first two modifications to carry out on the new 2.0 petrol turbo (TSI) (EA888 GEN4 engine) with the engine code DNP and replaces the OEM part number 5WA.129.635
- The Forge silicone hose in this kit has been designed to include an expensive inner liner of modified silicone known as Fluorosilicone.
- This means the hose is suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist.
- The construction of the hose has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically
- Increased capacity
- No engine check lights (EML)
- Increased air flow
- Lifetime warranty*
Compatible Vehicles :
Additional information
| Brand | Forge Motorsport |
|---|---|
| Make | A1, A3, Audi, Golf GTI, TT, Volkswagen |
| Model Year | 2019, 2020, 2021, 2022, 2023 |
Be the first to review “Forge Motorsport Turbo Inlet Adaptor for the VW Golf Mk8 GTI, Audi A1, A3, TT & Cupra – FMTIA6”
Quick Comparison
| Settings | Forge Motorsport Turbo Inlet Adaptor for the VW Golf Mk8 GTI, Audi A1, A3, TT & Cupra - FMTIA6 remove | TTE IS38RACE IHI UPGRADE TURBOCHARGER -TTE10354 remove | CTS TURBO 8V.2 RS3/ 8S TTRS 2.5T EVO TURBO OUTLET PIPE -CTS-IT-259 remove | CTS TURBO THROTTLE BODY INLET KIT FOR 8V.2/8S AUDI RS3/TT-RS (2018-2020) -CTS-IT-932 remove | CTS TURBO AUDI/VW 7-SPEED DSG/S-TRONIC DQ381 TURBO OUTLET PIPE (MK7.5, 8V.2, 8S.2) -CTS-IT-277 remove | CTS TURBO 8V.2 RS3/ 8S TTRS 2.5T EVO THROTTLE PIPE -CTS-IT-258 remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | Forge Motorsport Turbo Inlet Adaptor for the VW Golf Mk8 GTI, Audi A1, A3, TT & Cupra - FMTIA6 remove | TTE IS38RACE IHI UPGRADE TURBOCHARGER -TTE10354 remove | CTS TURBO 8V.2 RS3/ 8S TTRS 2.5T EVO TURBO OUTLET PIPE -CTS-IT-259 remove | CTS TURBO THROTTLE BODY INLET KIT FOR 8V.2/8S AUDI RS3/TT-RS (2018-2020) -CTS-IT-932 remove | CTS TURBO AUDI/VW 7-SPEED DSG/S-TRONIC DQ381 TURBO OUTLET PIPE (MK7.5, 8V.2, 8S.2) -CTS-IT-277 remove | CTS TURBO 8V.2 RS3/ 8S TTRS 2.5T EVO THROTTLE PIPE -CTS-IT-258 remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Image |  |  |  |  |  |  | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| SKU | FMTIA6 | TTE10354 | CTS-IT-259 | CTS-IT-932 | CTS-IT-277 | CTS-IT-258 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Price | د.إ900.00 | د.إ7,900.00 | د.إ880.00 | د.إ1,740.00 | د.إ950.00 | د.إ880.00 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Stock | In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Availability | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Content | Suitable for both left and right hand drive - This replaces OEM part number 5WA.129.635
With the success of turbo inlet adaptors for a number of platforms and engine configurations we took the opportunity to further our product range for the VW MK8 GTI. We looked to see if we could improve on the air flow to the turbo charger. On investigation we could see that the OEM turbo adaptor was restrictive and was an area in need for improvement. Therefore, our highly skilled development team got to work designing a solution to maximize the capacity by utilizing our CAD system and physical prototypes.
Combined with our product FMMD6 the turbo charger works more freely and should certainly be considered as one of the first two modifications to carry out on the new 2.0 petrol turbo (TSI) (EA888 GEN4 engine) with the engine code DNP and replaces the OEM part number 5WA.129.635
Compatible Vehicles : | TTE IS38Race IHI Turbocharger
Many of our customers have been asking for a motorsport IS38 turbocharger, Well here it is!
TTE IS38Race Turbocharger is based on the Original Genuine IHI IS38 turbocharger for the EA888.3 2.0TSI VAG Engine, not a cheap aftermarket clone IS38 turbo that are available from others and not disclosed.
A TTE IS38Race has a TTE upgrade performance bearing pack and motorsport balanced TTE core using the IHI Bearing housing and IHI IS38 turbine and Genuine IHI IS38 compressor wheel giving a reliable performance at higher boost levels as used on Stage 1 & 2 software calibrations from all software providers. We also include our TTE CNC silencer delete, removing the original baffle internals and fitting a new billet straight through section to improve the flow and enhance the sound.
This is a direct swap from a standard IS38 so no remap or special calibration required vs standard is38 software.
Precisely balancing the IS38Race turbocharger is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts balance machine, then components are assembled and then the CHRA is dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. A balance report document is supplied with your TTE IS38Race for your reassurance.
Product Highlights:
 | The CTS Turbo 8V.2 RS3/8S TTRS 2.5T EVO Turbo Outlet Pipe (TOP) is designed to replace the stock cast ‘pancake’ pipe that comes as factory equipment on your vehicle. Our Turbo Outlet Pipe features 2.50″ diameter CNC bent aluminum tube for optimized flow. If you’re looking for a simple bolt-on modification that will optimize flow, then this part is for you.
Product Details:
– For 8V.2 RS3/ 8S TTRS 2.5T EVO
– 2.5″ flow-optimized CNC bent aluminum pipe
– Robust black powder coating
– CNC machined mounting flange
– Coveted CTS Turbo logo
| Now fully compatible with all 2018-2020 Audi RS3/TTRS 2.5T DAZA and DNWA engines, this is one kit to fit them all!
CTS Turbo is proud to announce our improved 8V, 8V.2/8S Audi RS3/TTRS Throttle Body Inlet Kit for DAZA and DNWA
Our high flow throttle body inlet is designed it to be larger, but also more aerodynamic than the stock part. Our inlet has a 56% internal volume increase over the stock inlet. Using the latest CAD software, the shape of the inlet tract was flow optimized and cast from aluminum for best performance. All critical parts were CNC machined to ensure perfect fitment and performance.
We have also included our machined throttle body spacer from with two additional ports for boost reference and methanol injection; as well and a high-flow 2.75″ throttle inlet pipe. Custom-made silicone couplers and t-bolt clamps allow for seamless, easy installation.
Features:
| CTS Turbo is pleased to release our high flow turbo outlet pipe for 7-speed DSG MQB vehicles such a MK7.5 VW Golf R and 8V.2 Audi S3 and 8S Audi TT-S. The factory turbo outlet pipe is constructed from flimsy plastic and is quite narrow, which results in an extreme airflow restriction. The CTS Turbo high flow turbo outlet pipe kit is constructed from mandrel-bent 60mm aluminum tubing. A custom 5-ply silicon coupler makes installation simple! The CTS Turbo high flow turbo outlet pipe kit also replaces all the factory charge piping between the turbocharger compressor housing and factory intercooler.
Product Details:
| At CTS Turbo we are proud to announce our new throttle pipe for the 8V.2 RS3/8S TTRS 2.5T EVO. The OEM charge piping leaves something to be desired with inefficient bends not optimized for performance. The CTS Turbo throttle pipe allows for increased flow and greater performance. The integrated water methanol bungs allow for simple and straightforward installation of kits from Snow Performance. All of the components included in the CTS throttle pipe kit work flawlessly together to provide increased efficiency, power and torque throughout the entire power band and an aggressive race inspired sound.
Product Details:
– For 8V.2 RS3/ 8S TTRS 2.5T EVO
– CNC bent 2.5″ aluminum piping
– CNC machined MAP flange
– Integrated water methanol bungs with plugs
– Robust black powder coating
– CNC machined mounting flange
– Coveted CTS Turbo logo
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|
Related products
Copyright 2023 © VagLogic Designed by Sunwin Solutions SG
Reviews
There are no reviews yet.