RACINGLINE OIL COOLER SYSTEM 2.0 TSI EA888 Gen.3 ENGINES – VWR18G700
د.إ2,780.00
This product will be in stock and available for purchase.
In Stock
Did you like this product? Add to favorites now and follow the product.
Add to Wishlist
Add to Wishlist
Description
Racingline MQB VW Golf ‘R’/GTI 2.0 TSI OIL COOLER
FOR EA888 gen.3 & gen.4 ENGINES
The higher your power, the harder you drive, the more important it is to protect your oil with this Oil Cooler by RacingLine.
Racingline’s Oil Cooler kit is a complete ready to install package. An essential for any hard-driven Golf Mk7 GTI or ‘R’ running high power levels, hot climates or on the track.
Of course, adding power generates more heat to disperse. Significantly increased oil temperatures mean only one thing: a decrease in the ability for your engine to stay properly lubricated.
The new Racingline kit solves this problem: by adding in an additional air to oil cooler positioned right in the airflow in front of the car, oil temperatures are reduced by around 15-20ºc (of course this varies dependent on factors such as how the car is being driven, ambient temperatures and state of tune).
Unlike many oil cooler kits, this keeps the factory Oil to Water cooler in position – effectively doubling up on your cooling. As oil passes through the new cooler first, that means less heat transfer back into your car’s water coolant circuit too.
WHY FIT AN OIL COOLER KIT?
Our Oil Cooler Kit is an essential fit for any hard-driven MQB or MQB ‘Evo’ 2.0 TSI car running high power levels or in hot climates. It’s a complete ready to install package, using a clever sandwich plate design for straightforward and reliable installation.
Adding power to these 2.0 TSI engines generates more heat to disperse. Significantly increased oil temperatures means only one thing: a decrease in the ability for your engine to stay properly lubricated. At the same time, it’s really important not to over-cool the oil; our 10-row kit is perfect.
- Under hard driving, the stock oil cooler is easily overwhelmed. Failures start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade – losing its lubrication properties.
- The RacingLine kit solves this problem: by adding in an additional air to oil cooler positioned right in the airflow in the front of the car, oil temperatures are reduced by around 15 – 20 degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune).
- Our kit retains the factory oil to water cooler and adds to it with the front-mounted cooler – doubling up your cooling capability with less heat transfer into the water system.
- As the oil moves away from the heat inside the engine, its temperature drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.
- Supplied as a complete kit with every part ready for install.
What’s in the kit?
– Oil Cooler mounting brackets
– AN10 ‘210 Series’ Nylon braided feed and return lines
– Billet CNC oil cooler sandwich plate
– AN10 ’10-Row’ Oil Cooler Core
– Billet oil filter housing with removable drop in filter
– Fitting kit consisting of all necessary nuts, bolts, washers and rubber mountings
CONFIRMED APPLICATIONS
|
>
|
VW Golf 8 GTI
|
2020+
|
|
>
|
VW Golf 8 GTI Clubsport
|
2020+
|
|
>
|
VW Golf 8 R
|
2020+
|
|
>
|
VW Golf 7 & 7.5 GTI & Clubsport
|
2013-2020
|
|
>
|
VW Golf 7 & 7.5 R
|
2013-2020
|
|
>
|
VW Golf 7 & 7.5 1.8 TSI
|
2013-2020
|
|
>
|
VW Passat 2.0 TSI B8
|
2015+
|
|
>
|
VW Arteon 2.0 TSI
|
2017+
|
|
>
|
VW T-Roc R 2.0 TSI
|
2019+
|
|
>
|
VW Tiguan II 2.0 TSI
|
2016+
|
|
>
|
VW Jetta / GLI 7
|
2018+
|
|
|
|
|
|
>
|
Audi S3 8Y
|
2020+
|
|
>
|
Audi A3 2.0 TSI 8Y
|
2020+
|
|
>
|
Audi S3 8V
|
2013-2020
|
|
>
|
Audi A3 2.0 TSI / 1.8 TSI 8V
|
2013-2020
|
|
>
|
Audi TT 2.0 TSI 8S
|
2014+
|
|
>
|
Audi TTS 2.0 TSI 8S
|
2015+
|
|
>
|
Audi SQ2
|
2018+
|
Additional information
| Brand | Racingline |
|---|---|
| Make | A3, Audi, Golf GTI, Golf R, S3, SQ2, TT, TTS, Volkswagen |
| Model Year | 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 |
Be the first to review “RACINGLINE OIL COOLER SYSTEM 2.0 TSI EA888 Gen.3 ENGINES – VWR18G700”
Quick Comparison
| Settings | RACINGLINE OIL COOLER SYSTEM 2.0 TSI EA888 Gen.3 ENGINES – VWR18G700 remove | RACINGLINE MQB INTERCOOLER SYSTEM Golf R, S3/TTS – VWR14G700 remove | Snow Performance - Boost Cooler Stage 2E Power-Max - SP10250 remove | Forge Motorsport Intercooler for VW Golf MK8/Audi S3 - FMINT24 remove | RACINGLINE 2.0 TSI DSG OIL COOLER - MQB DQ250 6-SPEED VWR29G7250 remove | AIRTEC MOTORSPORT FRONT MOUNT INTERCOOLER FOR AUDI RS3 8Y - ATINTVAG43 remove | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | RACINGLINE OIL COOLER SYSTEM 2.0 TSI EA888 Gen.3 ENGINES – VWR18G700 remove | RACINGLINE MQB INTERCOOLER SYSTEM Golf R, S3/TTS – VWR14G700 remove | Snow Performance - Boost Cooler Stage 2E Power-Max - SP10250 remove | Forge Motorsport Intercooler for VW Golf MK8/Audi S3 - FMINT24 remove | RACINGLINE 2.0 TSI DSG OIL COOLER - MQB DQ250 6-SPEED VWR29G7250 remove | AIRTEC MOTORSPORT FRONT MOUNT INTERCOOLER FOR AUDI RS3 8Y - ATINTVAG43 remove | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Image |  |  |  |  |  |  | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| SKU | VWR18G700 | VWR14G700 | SP10250 | FMINT24 | VWR29G7250 | ATINTVAG43 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rating | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Price | د.إ2,780.00 | د.إ4,200.00 | د.إ2,500.00 | د.إ4,190.00 | د.إ3,200.00 | د.إ5,800.00 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Stock | In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Availability | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Add to cart | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description | This product will be in stock and available for purchase. | This product will be in stock and available for purchase. | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Content | Racingline MQB VW Golf ‘R’/GTI 2.0 TSI OIL COOLER
|
|
>
|
VW Golf 8 GTI
|
2020+
|
|
>
|
VW Golf 8 GTI Clubsport
|
2020+
|
|
>
|
VW Golf 8 R
|
2020+
|
|
>
|
VW Golf 7 & 7.5 GTI & Clubsport
|
2013-2020
|
|
>
|
VW Golf 7 & 7.5 R
|
2013-2020
|
|
>
|
VW Golf 7 & 7.5 1.8 TSI
|
2013-2020
|
|
>
|
VW Passat 2.0 TSI B8
|
2015+
|
|
>
|
VW Arteon 2.0 TSI
|
2017+
|
|
>
|
VW T-Roc R 2.0 TSI
|
2019+
|
|
>
|
VW Tiguan II 2.0 TSI
|
2016+
|
|
>
|
VW Jetta / GLI 7
|
2018+
|
|
|
|
|
|
>
|
Audi S3 8Y
|
2020+
|
|
>
|
Audi A3 2.0 TSI 8Y
|
2020+
|
|
>
|
Audi S3 8V
|
2013-2020
|
|
>
|
Audi A3 2.0 TSI / 1.8 TSI 8V
|
2013-2020
|
|
>
|
Audi TT 2.0 TSI 8S
|
2014+
|
|
>
|
Audi TTS 2.0 TSI 8S
|
2015+
|
|
>
|
Audi SQ2
|
2018+
|
Delivering lovely cool intake air temperatures for your 2.0 TSI EA888 gen3 MQB car. Again and again and again.The factory intercooler on the MQB-platform cars has proved to be unable to cope with the demands of higher power, hard driven cars, showing up as serious power losses during hard driving as air temperatures soar
WHAT IT DOES?
The factory intercooler on the MQB-platform cars has proved to be unable to cope with the demands of higher power, hard driven cars, showing up as serious power losses during hard driving as air temperatures soar.
- Our massive 'plate & bar' Intercooler System is the best performing intercooler upgrade on offer for the MQB-platform Golf 7 GTI, R and Audi S3.
- By consistently reducing intake air temperatures (IAT), heat soak is minimised delivering increased performance again and again. No need for the recovery cool-down times needed for the production intercooler.
- Our development focussed on finding the ‘sweet spot’ of maximum IAT cooling versus minimum pressure loss. This has allowed us to achieve increased size without increased lag.
- This race-proven cooler really is essential for every stage of tuning on any high performance MQB-platform car.
MAXIMUM CORE SIZE
The massive 'plate & bar' intercooler unit features a high-speed core using extra tall internal tubes for maximum boost flow.
SOPHISTICATED CORE
Highly effective aluminium plate & bar construction, developed following rigorous testing to optimise core dimensions, fin density, and pipe flow.
SMOOTH END TANKS
Cast construction for minimal turbulence and restriction delivering maximum flow across the entire core depth.
CONFIRMED APPLICATIONS
Some trimming to the plastic front panel may required for fitment:
|
>
|
VW Golf 7 & 7.5 GTI & Clubsport
|
2013-2020
|
|
>
|
VW Golf 7 & 7.5 R
|
2013-2020
|
|
>
|
VW Golf 7 & 7.5 1.8 TSI
|
2013-2020
|
|
>
|
VW Passat 2.0 TSI B8
|
2015+
|
|
>
|
VW Arteon 2.0 TSI
|
2017+
|
|
>
|
VW T-Roc R 2.0 TSI
|
2019+
|
|
>
|
VW Tiguan II 2.0 TSI
|
2016+
|
|
>
|
VW Jetta / GLI 7
|
2018+
|
|
|
|
|
|
>
|
Audi S3 8V
|
2013-2020
|
|
>
|
Audi A3 2.0 TSI / 1.8 TSI 8V
|
2013-2020
|
|
>
|
Audi TT 2.0 TSI 8S
|
2014+
|
|
>
|
Audi TTS 2.0 TSI 8S
|
2015+
|
|
>
|
Audi SQ2
|
2018+
|
- Boost pressure-dependent injection control - Optimal for all centrifugal compressors (Procharger, Vortech) and large turbochargers
- Higher boost pressure and/or more aggressive ignition without knocking combustion - additional power up to 25% possible.
- Dual Stage technology for maximum efficiency in all load ranges
- Octane booster, 116 octane racing fuel performance possible with regular gas
- Earlier ignition timing or compression without knocking combustion. Up to 25% more power possible.
- More power and torque with simultaneous reduction of the thermal load on engines that have already been modified, e.g. by chip tuning, NOS or LPG/autogas.
- Effective intake air cooling, compensation of power losses at higher outside temperatures
- Reduction of the specific fuel consumption.
- Deposit-free combustion chamber and intake tract, without formation of oil carbon.
- Easy installation
Why do we test different cores?
Here at Forge Motorsport, when developing an intercooler, we will test several different cores for each application. For example, a bar and plate style core, a tube and fin style core along with different fin pitches and heights, as well as changing the internal fin pitches/shapes and density within the tube; thus enabling us to fine tune the amount of pressure drop the intercooler produces. Pressure drop is not always a bad thing, as our testing and research has proven on various projects. This is because the pressurized air velocity is being stalled by the pressure drop within the cooler thus allowing more time to cool the air within the cooler itself, as air passes through the non-pressurized face of the core, that is open to the atmosphere.
Dyno Results
Testing was completed using Performance Remap in Gloucester with their VTEC 4-wheel drive dynamometer. This was to ensure all our data has been achieved with results as accurately as possible by an independent tuner. As you can see from the dyno results below, peak power was increased from stock by 11bhp and 20nm of torque at 5500RPM with the Forge Motorsport performance intercooler installed.
The best news is that there are significant torque gains throughout the rev range, meaning that the car power will pick up quicker and pull the whole way through to redline, including an impressive gain in BHP from 5000 RPM TO 6500 RPM. Gains on vehicles with re calibrated software and further hardware performance parts can be expected to be a lot higher due to the substantial drop in IATS when FMINT24 is installed.
During our extensive testing, we let the car heat soak on the dyno until the radiator fans tripped on and off (which gives an inlet temperature of around 40°C). We then did a dyno pull from this point which gives a more consistent result and reflects real-world driving conditions more accurately. You can easily see the Forge intercooler cools much quicker and delivers a much greater drop in temperature compared to OEM.
Why do we try to decrease IAT's? (Inlet Air Temperature)
Temperature and volume of air supplied to your vehicles engine that is compressed by the turbo charger has a better effect on performance when cool as this is to provide the engine with more oxygen (denser air), thus improving the combustion in each cylinder. In addition, by regulating and reducing the air temperature, it also increases the reliability of an engine by keeping the AFRs (Air Fuel Ratios) in each cylinder at a safe level, which in turn, can increase an engines power due to the air being cooler. A bigger bang is then created within the cylinder, providing the correct amount of fuel is added. This can equate to an increase in BHP and torque.
The Forge Motorsport intercooler is a perfect performance enhancing product that fits directly to the OEM mounting points, making for an easy install, in a relatively short period of time. No cutting of any components is needed, making the installation reversible if the vehicle needs to be returned to stock at any time in the future. The core and end tanks are finished in our black textured anti corrosion coating that also aids with its thermal properties and keeps the product looking that bit stealthier or OEM+.
The Forge Motorsport lifetime warranty on all hardware products shows the trust we have in the quality of our products while they are being enjoyed on your pride and joy.
Compatible Vehicles :
Racingline Performance DSG Oil Cooler System for MQB DQ250 (6 Speed Only) - VWR29G7250
Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade – losing its lubrication properties.
- When this happens, the DSG will protect itself and begin to lower the torque, increase shift times and in extreme circumstances even loose gear selection.
- The RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15 – 20 degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune).
- The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler – doubling up your cooling capability when it’s needed with less heat transfer into the water system.
- Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.
What’s included in the kit
- Oil cooler mounting brackets
- AN10 210 series Nylon braided feed and return line
- Billet CNC thermostatic adaptor block
- Replacement, low-profile oil/water cooler
- AN10 10-row oil/air cooler core
- Fitting kit containing all necessary nuts, bolts, washers and rubber mounting bobbins
Why fit a DSG Cooler Kit?
Our unique DSG Oil Cooler Kit is an essential fit for any hard-driven MQB 2.0 TSI car running high power levels or in hot climates. It’s a complete ready to install package, using a clever sandwich plate design for straightforward and completely reliable installation.
Transferring more power and torque through the DSG gearbox generates ever more heat to dissipate. Significantly increased oil temperatures means only one thing: a decrease in the ability for your DSG box to stay properly cooled, eventually causing power drop and gear selection issues.
- Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade – losing its lubrication properties.
- When this happens, the DSG will protect itself and begin to lower the torque, increase shift times and in extreme circumstances even loose gear selection.
- The RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15 – 20 degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune).
- The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler – doubling up your cooling capability when it’s needed with less heat transfer into the water system.
- Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.
CONFIRMED APPLICATIONS
VWR29G7250 / DQ250 6-SPEED GEARBOXES ONLY *
*not for US-spec DQ250 with Secondary Air Intake (SAI) system
|
>
|
VW Golf 7 & 7.5 GTI & Clubsport
|
2013-2020
|
|
>
|
VW Golf 7 & 7.5 R
|
2013-2020
|
|
>
|
VW Golf 7 & 7.5 1.8 TSI
|
2013-2020
|
|
>
|
VW Passat 2.0 TSI B8
|
2015+
|
|
>
|
VW Arteon 2.0 TSI
|
2017+
|
|
>
|
VW T-Roc R 2.0 TSI
|
2019+
|
|
>
|
VW Tiguan II 2.0 TSI
|
2016+
|
|
>
|
VW Jetta / GLI 7
|
2018+
|
|
|
|
|
|
>
|
Audi S3 8V
|
2013-2020
|
|
>
|
Audi A3 2.0 TSI / 1.8 TSI 8V
|
2013-2020
|
|
>
|
Audi TT 2.0 TSI 8S
|
2014+
|
|
>
|
Audi TTS 2.0 TSI 8S
|
2015+
|
|
>
|
Audi SQ2
|
2018+
|
- Specifically designed for the 8Y RS3 model
- 108% increase in overall capacity in comparison to original
- 125% increase in frontal area over standard
- Huge increase in cooling ability
- Reduced charge temperatures
- Incorporated crash bar design
- High-flow, moulded one-piece cast end tanks
- Powder coated black finish
- Includes fittings and fixtures
- Detailed fitting guide included
| Brand | Racingline |
|---|---|
| Make | A3, Audi, Golf GTI, Golf R, S3, SQ2, TT, TTS, Volkswagen |
| Model Year | 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 |
| Brand | Racingline |
|---|---|
| Make | A3, Audi, Golf GTI, Golf R, S3, SQ2, TT, TTS, Volkswagen |
| Model Year | 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 |
| Brand | Snow Performance |
|---|---|
| Make | AMG C63, AMG E63, AMG G63, AMG GT/GTS/GTR/GTC, AMG S63, Audi, Golf GTI, Golf R, Mercedes-Benz, R8, RS3, RS4, RS5, RS6, RS7, S3, S4, S5, S6, S7, S8, Supra, Toyota, Volkswagen |
| Model Year | 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 |
| Brand | Forge Motorsport |
|---|---|
| Make | Audi, Golf GTI, Golf R, S3, Volkswagen |
| Model Year | 2020, 2021, 2022, 2023 |
| Brand | Racingline |
|---|---|
| Make | A3, Audi, Golf GTI, Golf R, S3, SQ2, TT, TTS, Volkswagen |
| Model Year | 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 |
| Brand | Airtec Motorsport |
|---|---|
| Make | Audi, RS3 |
| Model Year | 2022, 2023 |
Related products
Copyright 2023 © VagLogic Designed by Sunwin Solutions SG
Reviews
There are no reviews yet.