TTE IS38RACE IHI UPGRADE TURBOCHARGER -TTE10354

SKU: TTE10354
In Stock

د.إ7,900.00

Upon placing the order, we will get in touch with you to confirm the availability information.

For Instant Enquiry and More Details, Please Click Here

In Stock
Add to Wishlist
Add to Wishlist

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist
Low Prices

Price match guarantee

Guaranteed Fitment.

Always the correct part

In-House Experts.

We know our products

Wide Product Selection

Endless Possibilities

Category:

Description

TTE IS38Race IHI Turbocharger

 

Many of our customers have been asking for a motorsport IS38 turbocharger, Well here it is!

TTE IS38Race Turbocharger is based on the Original Genuine IHI IS38 turbocharger for the EA888.3 2.0TSI VAG Engine, not a cheap aftermarket clone IS38 turbo that are available from others and not disclosed.

A TTE IS38Race has a TTE upgrade performance bearing pack and motorsport balanced TTE core using the IHI Bearing housing and IHI IS38 turbine and Genuine IHI IS38 compressor wheel giving a reliable performance at higher boost levels as used on Stage 1 & 2 software calibrations from all software providers.  We also include our TTE CNC silencer delete, removing the original baffle internals and fitting a new billet straight through section to improve the flow and enhance the sound.

This is a direct swap from a standard IS38 so no remap or special calibration required vs standard is38 software.  

Precisely balancing the IS38Race turbocharger is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts balance machine, then components are assembled and then the CHRA is dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. A balance report document is supplied with your TTE IS38Race for your reassurance.

 

 

Product Highlights:

  • Original IS38 Genuine IHI turbocharger as the base part
  • Original Genuine actuator (TTE calibrated)
  • Original Genuine diverter valve
  • Original Genuine IHI Boost silencer
  • Original Genuine IHI IS38 compressor
  • Original Genuine IHI IS38 turbine
  • TTE Upgrade Reinforced bearing pack
  • TTE Silencer delete 
  • Plug and Play installation as IS38 turbocharger
  • Single parts finely balanced then components assembled and core high-speed VSR balanced
  • Supplied with a balance test result document
  • Perfect choice for stock software or all IS38 2.0 TSI ECU stage 1 or 2 & 2+ calibrations (APR, BEVO, DVX, JDE, UNITRONIC, MRC, REVO, REVLIMIT, ETUNER, & Many More)
  • Proven TheTurboEngineers quality
  • Made in Germany

IF SENDING A TURBOCHARGER BE SURE TO CHECK IS AN OEM GENUINE IHI IS38

Please check out our TTE HEAT SHIELD ISOLATION ADD-ON option that’s available.  

iso

Additional information

Brand

The Turbo Engineer

Make

Audi, Golf R, S3, Volkswagen

Model Year

2015, 2016, 2017, 2018, 2019, 2020

Reviews

There are no reviews yet.

Be the first to review “TTE IS38RACE IHI UPGRADE TURBOCHARGER -TTE10354”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsTTE IS38RACE IHI UPGRADE TURBOCHARGER -TTE10354 removeRACINGLINE TURBO INLET ELBOW FOR 2.0 TSI EA888.4 245PS GOLF 8 GTI, LEON CUPRA FW, AUDI A3 8Y - VWR120003 removeTHE TURBO SYSTEM TTE700 EVO EA855 2.5 TFSI UPGRADE TURBOCHARGER -SW10032.1 removeCTS TURBO B8/B8.5 AUDI A4/A5/ALLROAD/Q5 2.0T CHARGE PIPE -CTS-IT-267 removeCTS TURBO BMW F80/82/83/87 M2C/M3/M4 S55 J-PIPE THROTTLE BODY PIPE -CTS-IT-312 removeCTS TURBO B9 AUDI S4/S5 3.0T CHARGE PIPE KIT -CTS-IT-292 remove
NameTTE IS38RACE IHI UPGRADE TURBOCHARGER -TTE10354 removeRACINGLINE TURBO INLET ELBOW FOR 2.0 TSI EA888.4 245PS GOLF 8 GTI, LEON CUPRA FW, AUDI A3 8Y - VWR120003 removeTHE TURBO SYSTEM TTE700 EVO EA855 2.5 TFSI UPGRADE TURBOCHARGER -SW10032.1 removeCTS TURBO B8/B8.5 AUDI A4/A5/ALLROAD/Q5 2.0T CHARGE PIPE -CTS-IT-267 removeCTS TURBO BMW F80/82/83/87 M2C/M3/M4 S55 J-PIPE THROTTLE BODY PIPE -CTS-IT-312 removeCTS TURBO B9 AUDI S4/S5 3.0T CHARGE PIPE KIT -CTS-IT-292 remove
Image
SKUTTE10354VWR120003SW10032.1CTS-IT-267CTS-IT-312CTS-IT-292
Rating
Priceد.إ7,900.00د.إ1,320.00د.إ18,600.00د.إ740.00د.إ715.00د.إ1,095.00
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

DescriptionUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here
ContentTTE IS38Race IHI Turbocharger   Many of our customers have been asking for a motorsport IS38 turbocharger, Well here it is! TTE IS38Race Turbocharger is based on the Original Genuine IHI IS38 turbocharger for the EA888.3 2.0TSI VAG Engine, not a cheap aftermarket clone IS38 turbo that are available from others and not disclosed. A TTE IS38Race has a TTE upgrade performance bearing pack and motorsport balanced TTE core using the IHI Bearing housing and IHI IS38 turbine and Genuine IHI IS38 compressor wheel giving a reliable performance at higher boost levels as used on Stage 1 & 2 software calibrations from all software providers.  We also include our TTE CNC silencer delete, removing the original baffle internals and fitting a new billet straight through section to improve the flow and enhance the sound. This is a direct swap from a standard IS38 so no remap or special calibration required vs standard is38 software.   Precisely balancing the IS38Race turbocharger is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts balance machine, then components are assembled and then the CHRA is dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. A balance report document is supplied with your TTE IS38Race for your reassurance.     Product Highlights:
  • Original IS38 Genuine IHI turbocharger as the base part
  • Original Genuine actuator (TTE calibrated)
  • Original Genuine diverter valve
  • Original Genuine IHI Boost silencer
  • Original Genuine IHI IS38 compressor
  • Original Genuine IHI IS38 turbine
  • TTE Upgrade Reinforced bearing pack
  • TTE Silencer delete 
  • Plug and Play installation as IS38 turbocharger
  • Single parts finely balanced then components assembled and core high-speed VSR balanced
  • Supplied with a balance test result document
  • Perfect choice for stock software or all IS38 2.0 TSI ECU stage 1 or 2 & 2+ calibrations (APR, BEVO, DVX, JDE, UNITRONIC, MRC, REVO, REVLIMIT, ETUNER, & Many More)
  • Proven TheTurboEngineers quality
  • Made in Germany
IF SENDING A TURBOCHARGER BE SURE TO CHECK IS AN OEM GENUINE IHI IS38 Please check out our TTE HEAT SHIELD ISOLATION ADD-ON option that’s available.   iso
FOR 2.0TSI EA888.4 'LOWER OUTPUT' 245PS / 207PS (GARRETT TURBO)
Release power with the 2.0 TSI gen 4 Turbo Inlet System. A significantly enlarged airflow path from intake straight into turbo.

For the Garrett turbo (lower output) 245ps engines such as Golf 8 GTI.
WHAT THE TURBO INLET SYSTEM DOES?

Our new Turbo Inlet System for the 245PS & 207PS MQB 'EVO' cars such as Golf 8 GTI is a matched package of our much larger diameter, free flowing Turbo 90 Inlet paired with reinforced Silicone Turbo Inlet Hose for much higher airflow between intake and turbo.

  • The factory inlet forces the airflow to pass through the restrictive plastic 'bellows' pipe, before tapering right down to run through a tight and restrictive plastic turbo inlet - in other words, terrible for flow. 
  • The RacingLine Turbo Inlet System replaces this pipework with a larger diameter smooth-flowing silicon hose mated to a larger diameter thin-wall free flowing intake elbow.
  • The internal diameter of the Turbo 90 Inlet is massively increased from 62.5mm on the factory part right up to 76mm.
  • It's by combining the two parts of the kit that's allowed us to enlarge the diameter of both the Inlet and the Hose so much - and so give the maximum possible gains.
  • Put simply, without it, you’re wasting much of the potential of your high-flow intake system without fitting this Turbo Inlet System. An essential upgrade!
CONFIRMED APPLICATIONS
>
VW Golf 8 GTI
2020+
>
Audi A1 Competition 207PS 40TFSI GB
2021+
>
Audi A3 2.0 TSI 8Y
2020+
>
Audi TT 45 TFSI 8S EA888.4
2021+

TTE700 EVO UPGRADE TURBOCHARGER FOR RS3 8V.2 & 8Y / TTRS 8S DAZA, DNWA, DNWC

A TTE700 Is an original RS3 8V.2/TTRS 8S turbocharger that we the THETURBOENGINEERS Rework to make amazing performance yet still plug & play fitting with an upgrade inlet. To make a TTE700 the compressor wheel is exchanged for a TTE milled aluminum wheel with state-of-the-art geometry, 7+7 blade, and of a much larger size, so producing extra power. Equally, we change the original exhaust turbine for a far larger but very lightweight 9 blade TTE designed the turbine for lower exhaust gas backpressure giving greater performance. We also fitted a TTE motorsport upgrade bearing system for durability. Boost response as always is focused on when we were designing this unit and it does not disappoint.

If ordering new, we use the latest generation of BorgWarner original turbochargers with the latest spec Audi thermal heat isolation shielding on the exhaust manifold & turbine housing to lower engine bay temperatures and ensure the best performance and safety.

Please note if you send an older generation turbo, without the original AUDI thermal shielding for the "upgrade" process, we will rework your turbo and return without the shielding, unless you buy the extra thermal Isolation process.  Depending on stock availability we may substitute TTE thermal shielding and give AUDI original thermal shielding instead. 

Equilibrium

Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled and then the CHRA are dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with a serial numbered balance test result document.

Features :  

  • TTE Billet Milled 7+7 Blade, 63mm Inlet compressor
  • TTE 9 Blade High-flow Low-mass turbine
  • TTE Upgrade bearing pack
  • Genuine BorgWarner Turbocharger as the base part
  • Genuine BorgWarner actuator
  • Thermally shielded exhaust manifold and housing
  • CNC Optimized Compressor Cover Machining Clearances
  • Plug and Play Installation
  • 600+ depending on fuel (link here for required upgrade injectors)
  • Single parts finely balanced then components assembled and core high-speed VSR balanced
  • Supplied with a balance test result document
  • Software recalibration is required
  • Proven TheTurboEngineers quality
  • Made in Germany

From time to time when buying new, we might supply the upgrade TTE thermal isolation free of charge if AUDI OEM heat shielded units are not avalible.

 
Make Model Submodel Engine
Audi 8S TTRS Quattro 2.5T
Audi RS3 8V (2018+) 2.5T
 
CTS Turbo is proud to introduce high-flow charge pipe upgrade for 2.0TFSI Audi A4/A5/Allroad and Q5. This aluminum pipe will replace a restrictive plastic charged air pressure pipe located on the left side on the vehicle. It removes the factory “air charge pulsation damper” for maximum flow and sound! Our charge pipe allows for easy installation of water-methanol injection via integrated 1/8″ NPT bung. Features:
  • 2.5″ mandrel bent aluminum construction
  • CNC machined MAP sensor bung
  • 1/8″ NPT bung for water/meth injection nozzle
  • Black powdercoat for long lasting finish
  • Direct replacement for OE pressure pipe: 8K0145673AJ
  • Compatible with factory or aftermarket intercooler hoses
Fitment
  • 2009-2016 Audi B8/B8.5 All-Road 2.0T
  • 2009-2016 Audi B8/B8.5 A4 FWD 1.8T – ROW Market
  • 2009-2016 Audi B8/B8.5 A4 2.0T
  • 2009-2016 Audi B8/B8.5 A5 2.0T
  • 2008-2017 Audi 8R Q5 2.0T
Not for late 2016+ ROW B8.5 Audi A4/A5 with Gen3 engines.
Make Model Year Generation
AUDI A4 2009 - 2016 B8/8.5
AUDI A5 2009 - 2016 B8/8.5
Introducing the CTS TURBO J-Pipe forBMW F80, F82, F83 M3/M4 and F87 M2 COMPETITION (S55). The plastic OEM chargepipe is prone to failure at STOCK boost levels. CTS Turbo J-Pipe offers more air flow into the throttle body and a fully-welded solid design. OE fitment and peace of mind at any boost level. We added two meth bungs for those who are wanting to use water-methanol injection. Measuring at consistent 3″ ID, this is the largest throttle body j-pipe on the market. You’ll notice an increase in throttle response and a decrease in turbo lag. Product Details:
  • 3″ J-pipe for uninterrupted flow
  • 3D CAD designed and flow tested
  • Billet CNC Aluminum Flange
  • T6061 Mandrel Bent Aluminium Pipe
  • Beautiful Black Powdercoat Finish with CTS logo
  • 4-ply silicon connector
  • Stainless Steel Clamps
  • Laser-etched CTS Turbo Logo
  • 2 Water Methanol Bungs (with plugs)
  • New throttle body o-ring and installation hardware

Fitment:

  •  2015-2020 BMW M3 & M4 with the S55 engine (F80, F82, F83)
  • 2018-current BMW M2 Competition with the S55 engine (F87)
  • Compatible with factory or aftermarket intercoolers. Fits manual and DCT transmissions, LHD and RHD vehicles.
Make Model Year Generation
BMW M2C 2018 - 2021 F87
BMW M3 2014 - 2020 F80
BMW M4 2015 - 2020 F82
CTS Turbo is excited to announce the release of the B9 Audi S4/S5 3.0T TFSI charge pipe upgrade kit. Factory pipe that connects intercooler to the throttle body is made of brittle plastic. It’s wise to replace it with an all-aluminum high flowing CTS Turbo charge pipe. Our 2.5″ charge pipe kit will increase flow and improve the reliability of your B9 Audi S4/S5. You’ll notice an increase in throttle response and a decrease in turbo lag. Two water/methanol bungs provide an easy way to install injection nozzles. Product Details
  • 2.5″ mandrel-bent aluminum piping
  • Billet throttle body inlet adapter
  • Precision CNC machined MAP sensor flange
  • Robust Black Powdercoated Finish
  • 4 ply silicon connector
  • Stainless Steel Clamps
  • 2 x 1/8″ NPT Water-Methanol Bungs with plugs
  • Compatible with factory and CTS Turbo intercoolers (may be compatible with other aftermarket intercoolers)
  • Replaces OE 8W0145673AQ, 8W0145673AE
Fitment
  • 2018 – current B9/B9.5 Audi S4 3.0T Turbo
  • 2018 – current B9/B9.5 Audi S5 3.0T Turbo
Make Model Year Generation
AUDI S4 2018 - 2021 B9
AUDI S5 2018 - 2021 B9
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Brand

The Turbo Engineer

Make

Audi, Golf R, S3, Volkswagen

Model Year

2015, 2016, 2017, 2018, 2019, 2020

Brand

Racingline

Make

A1, A3, Audi, Golf GTI, TT, Volkswagen

Model Year

2020, 2021, 2022, 2023

Brand

The Turbo Engineer

Make

Audi, RS3, TTRS

Model Year

2015, 2016, 2017, 2018, 2019, 2020

Brand

CTS Turbo

Make

A4, A5, Audi

Model Year

2011, 2012, 2013, 2014, 2015, 2016

Brand

CTS Turbo

Make

M2, M3, M4

Model Year

2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021

Brand

CTS Turbo

Make

Audi, S4, S5

Model Year

2018, 2019, 2020, 2021