Forge Motorsport Uprated Intercooler for the EA888 2.0 TSI engine – FMMK7FMIC

SKU: FMMK7FMIC
In Stock

د.إ3,990.00

Upon placing the order, we will get in touch with you to confirm the availability information.

For Instant Enquiry and More Details, Please Click Here

In Stock
Add to Wishlist
Add to Wishlist

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist
Low Prices

Price match guarantee

Guaranteed Fitment.

Always the correct part

In-House Experts.

We know our products

Wide Product Selection

Endless Possibilities

Category:

Description

This is our intercooler for the Volkswagen Mk7 Golf, Mk7RTiguanAudi TT MK3 2.0 TSI and S3 8V, as well as the Skoda Kodiaq, fitted with the EA888 2.0 TSI engine. Volkswagen group changed just about everything from the Mk6 to the Mk7 chassis, so this core had to be designed from scratch in order to fit in with the redesigned radiator and condenser.

  • Gains of 16bhp
  • Temperature drops of 25-30°C
  • Reduced turbo lag, increased response
  • Greater overall surface area for greater heat dissipation
  • Utilising a race specification bar and plate construction air core
  • High flow cast end tanks ensuring optimum air transition for cooling efficiency
  • Dyno proven horsepower and torque gains
  • Provides smoother power curve
  • Dimensions: 650x420x50mm
  • Includes necessary hardware and instructions for installation

Designed for performance and reliability, the core fits in the stock location meaning cooling is radically improved over OEM. Our test Golf Mk7 GTI achieved gains of up to 16bhp more* without any other modifications whilst also demonstrating a consistent 25-30°C temperature drop* over stock on the dyno, with all runs performed on the same day with only a 2°C variation in ambient temperature over the runs (in fact it was 2°C hotter when we tested the Forge core). You can also see the temperature drop comparison of the stock and Forge cores in the graph below.

*gains will vary per car model and conditions

The stock core typically increased in temperature by 5°C on each subsequent run, with heat soak becoming a real issue after only three runs. The stock ECU was pulling timing and boost after only one run – typically anything over 40°C inlet temperature will cause the ECU to change ignition timing to suit – and the stock core peaked at 60°C on its first run, where the Forge core was able to get temperatures back under control after each run so that by the end of 4 back to back runs the core temperature had only risen by 4°C.

All of this was achieved on a stock car (it should be noted that although Volkswagen claim 220bhp for this new engine we have seen examples range from 230 to 240bhp completely stock, on the same rolling road). We are confident that the core will continue to deliver a much lower intake charge temperature than stock across all states of tune, as it’s based on our award winning Mk5/Mk6 intercooler which has been fitted with great success on everything from road and track cars, to full blown race and drag cars.

So, what other reasons do you have to purchase this intercooler? All Forge intercoolers are designed and hand fabricated in the UK to ensure perfect quality and fitment. Made in England, guaranteed for life. Combining our decades of experience in motorsport engineering and CAD flow simulation software, we have designed and tested the ultimate intercooler for your vehicle, incorporating the latest technology in bar and plate cores. The intercooler core is then complimented with our high flow end tanks. With the extra intercooler capacity, remapping your vehicle would bring further performance gains.

The core and end tanks are finished in black textured anti corrosion coating, which not only looks superb, but also gives this product added longevity in the harshest of environments. Our intercoolers are tested on the dyno against the stock cooler to measure the gains in power and reduction in temperatures. These tests are repeated until we are confident we can provide an industry leading product!

*Please note – This will not fit Audi S3 facelift 2017 onwards – Some modification to Audi S3 and TTS may be necessary*

⭐ Excellent product, fairly easy to fit, good kit, I also fitted the long inlet pipe. Professional company I would recommend happily, thanks again ⭐­

⭐­ One of the best Intercoolers. I think its better then other Aftermarket IC ⭐

⭐­ Simply high quality product. Ambient temp around 10 degree. During long acceleration temperature falling. We think its the best product in Europe ⭐­

Check out all the reviews here

Compatible Vehicles :

Audi
  • S3
    • 2.0 TSI (8V Chassis)
  • TT
    • Mk3
      • 2.0 TSI 2015 Onwards
  • TTS
    • Mk3 8S (2014-)
Volkswagen
  • Golf
    • MK7
      • GTI
      • GTI Clubsport ED40
      • R
    • MK7.5
      • GTI
      • R
  • Tiguan
    • 2.0 TSI 2017 Onwards

Reviews

There are no reviews yet.

Be the first to review “Forge Motorsport Uprated Intercooler for the EA888 2.0 TSI engine – FMMK7FMIC”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsForge Motorsport Uprated Intercooler for the EA888 2.0 TSI engine - FMMK7FMIC removeForge Motorsport High Flow Discharge Pipe for 1.8T and 2.0T VAG Engines - FMMK7DP removeRACINGLINE REMOTE FILL WASHER REFILL KIT FOR GOLF R and AUDI S3 WITH OIL CATCH CAN KIT VWR13G700RFK removeCTS TURBO MK7/7.5 THROTTLE PIPE (GTI/GOLF R/GOLF GTI/A3/S3/TT) 2015+ MQB MODELS -CTS-IT-280 removeCTS TURBO CHARGE PIPE UPGRADE KIT FOR BMW G20/G29/G05/G07/G11 AND A90 TOYOTA SUPRA B58C 3.0L - CTS-IT-349 removeForge Motorsport Intercooler for VW Golf MK8/Audi S3 - FMINT24 remove
NameForge Motorsport Uprated Intercooler for the EA888 2.0 TSI engine - FMMK7FMIC removeForge Motorsport High Flow Discharge Pipe for 1.8T and 2.0T VAG Engines - FMMK7DP removeRACINGLINE REMOTE FILL WASHER REFILL KIT FOR GOLF R and AUDI S3 WITH OIL CATCH CAN KIT VWR13G700RFK removeCTS TURBO MK7/7.5 THROTTLE PIPE (GTI/GOLF R/GOLF GTI/A3/S3/TT) 2015+ MQB MODELS -CTS-IT-280 removeCTS TURBO CHARGE PIPE UPGRADE KIT FOR BMW G20/G29/G05/G07/G11 AND A90 TOYOTA SUPRA B58C 3.0L - CTS-IT-349 removeForge Motorsport Intercooler for VW Golf MK8/Audi S3 - FMINT24 remove
Image
SKUFMMK7FMICFMMK7DPVWR13G700RFKCTS-IT-280CTS-IT-349FMINT24
Rating
Priceد.إ3,990.00د.إ1,050.00د.إ300.00د.إ950.00د.إ1,300.00د.إ4,190.00
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

DescriptionUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereThis product will be in stock and available for purchase.Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here
ContentThis is our intercooler for the Volkswagen Mk7 Golf, Mk7RTiguanAudi TT MK3 2.0 TSI and S3 8V, as well as the Skoda Kodiaq, fitted with the EA888 2.0 TSI engine. Volkswagen group changed just about everything from the Mk6 to the Mk7 chassis, so this core had to be designed from scratch in order to fit in with the redesigned radiator and condenser.
  • Gains of 16bhp
  • Temperature drops of 25-30°C
  • Reduced turbo lag, increased response
  • Greater overall surface area for greater heat dissipation
  • Utilising a race specification bar and plate construction air core
  • High flow cast end tanks ensuring optimum air transition for cooling efficiency
  • Dyno proven horsepower and torque gains
  • Provides smoother power curve
  • Dimensions: 650x420x50mm
  • Includes necessary hardware and instructions for installation
Designed for performance and reliability, the core fits in the stock location meaning cooling is radically improved over OEM. Our test Golf Mk7 GTI achieved gains of up to 16bhp more* without any other modifications whilst also demonstrating a consistent 25-30°C temperature drop* over stock on the dyno, with all runs performed on the same day with only a 2°C variation in ambient temperature over the runs (in fact it was 2°C hotter when we tested the Forge core). You can also see the temperature drop comparison of the stock and Forge cores in the graph below. *gains will vary per car model and conditions The stock core typically increased in temperature by 5°C on each subsequent run, with heat soak becoming a real issue after only three runs. The stock ECU was pulling timing and boost after only one run – typically anything over 40°C inlet temperature will cause the ECU to change ignition timing to suit – and the stock core peaked at 60°C on its first run, where the Forge core was able to get temperatures back under control after each run so that by the end of 4 back to back runs the core temperature had only risen by 4°C. All of this was achieved on a stock car (it should be noted that although Volkswagen claim 220bhp for this new engine we have seen examples range from 230 to 240bhp completely stock, on the same rolling road). We are confident that the core will continue to deliver a much lower intake charge temperature than stock across all states of tune, as it's based on our award winning Mk5/Mk6 intercooler which has been fitted with great success on everything from road and track cars, to full blown race and drag cars.
So, what other reasons do you have to purchase this intercooler? All Forge intercoolers are designed and hand fabricated in the UK to ensure perfect quality and fitment. Made in England, guaranteed for life. Combining our decades of experience in motorsport engineering and CAD flow simulation software, we have designed and tested the ultimate intercooler for your vehicle, incorporating the latest technology in bar and plate cores. The intercooler core is then complimented with our high flow end tanks. With the extra intercooler capacity, remapping your vehicle would bring further performance gains. The core and end tanks are finished in black textured anti corrosion coating, which not only looks superb, but also gives this product added longevity in the harshest of environments. Our intercoolers are tested on the dyno against the stock cooler to measure the gains in power and reduction in temperatures. These tests are repeated until we are confident we can provide an industry leading product! *Please note - This will not fit Audi S3 facelift 2017 onwards - Some modification to Audi S3 and TTS may be necessary* ⭐ Excellent product, fairly easy to fit, good kit, I also fitted the long inlet pipe. Professional company I would recommend happily, thanks again ⭐­ ⭐­ One of the best Intercoolers. I think its better then other Aftermarket IC ⭐ ⭐­ Simply high quality product. Ambient temp around 10 degree. During long acceleration temperature falling. We think its the best product in Europe ⭐­ Check out all the reviews here
Compatible Vehicles :
Audi
  • S3
    • 2.0 TSI (8V Chassis)
  • TT
    • Mk3
      • 2.0 TSI 2015 Onwards
  • TTS
    • Mk3 8S (2014-)
Volkswagen
  • Golf
    • MK7
      • GTI
      • GTI Clubsport ED40
      • R
    • MK7.5
      • GTI
      • R
  • Tiguan
    • 2.0 TSI 2017 Onwards
Designed as a direct replacement for the OEM plastic discharge pipe (Part No. 5Q0145840) used on 1.8T and 2.0T engines found in various VW, Audi, Seat and Skoda models. Full mandrel bent single piece hard pipe with larger bore size for increased flow. This ensures high amounts of air are discharged from the turbo charger and therefore releasing the full potential of your engines capabilities. Unlike the OEM discharge pipe that is prone to failure from increased boost or many heat cycles, the Forge Motorsport high flow discharge pipe will not crack or fail - ever. This is backed up by our no quibble Lifetime warranty.
 
 
 
Supplied in black powder coated finish for that OEM look with a choice of hose colours red, blue, or black to compliment the look of your engine bay. No modifications to original equipment are necessary to install this part. This will fit with the stock turbo muffler or with the Forge Motorsport Muffler Delete FMMD2 which will further enhance the benefits of this discharge pipe.   In the box: Hard pipe Silicone Hose Hose Clamps   *NOT COMPATIBLE WITH 7-SPEED DSG MODELS
Compatible Vehicles :
 
Audi
  • A3
    • 1.8/2.0 TSI 2015 Onwards
  • Q2
    • 2.0 2017-2021
  • S3
    • 2.0 TSI (8V Chassis)
  • TT
    • Mk3
      • 2.0 TSI 2015 Onwards
  • TTS
    • Mk3 8S (2014-)
Volkswagen
  • Arteon
    • 2.0 TSI
  • Golf
    • MK7
      • 1.8 TFSI
      • GTI
      • GTI Clubsport ED40
      • R
    • MK7.5
      • GTI
      • R
  • T-Roc
    • 2.0 2018-2021
  • Touran
    • 1.8 TFSI
 
Essential for fitting the RacingLine Oil Management kit on Golf 7R and Audi S3+
WHY FIT?

To fit our Oil Management Kit on Golf 7R and Audi S3 models, you will also need this Remote Washer Refill Kit.

  • Golf 7R and some early Audi S3 models have a different windscreen washer bottle fitment to the other MQB cars, with the reservoir located on the right of the vehicle compared to the majority of MQB models which have the washer bottle on the left.
  • For these cars with right-hand reservoirs, this is located where the Catch Can will be mounted. The kit replaces the top half of the factory washer bottle to still allow you to refill your washer fluid easily and neatly.
  • Included is a beautifully high-gloss filler cap which locates conveniently on the front panel using the bracket provided
  • Many owners prefer the appearance of our Remote Washer Refill  and of course this can be fitted without having the RacingLine Oil Management kit installed.
CONFIRMED APPLICATIONS
>
VW Golf 7 & 7.5 GTI & Clubsport
2013-2020
>
VW Golf 7 & 7.5 R
2013-2020
>
VW Golf 7 & 7.5 1.8 TSI
2013-2020
>
VW Passat 2.0 TSI B8
2015+
>
VW Arteon 2.0 TSI
2017+
>
VW T-Roc R 2.0 TSI
2019+
>
VW Tiguan II 2.0 TSI
2016+
>
VW Jetta / GLI 7
2018+
>
Audi S3 8V
2013-2020
>
Audi A3 2.0 TSI / 1.8 TSI 8V
2013-2020
>
Audi TT 2.0 TSI 8S
2014+
>
Audi TTS 2.0 TSI 8S
2015+
>
Audi SQ2
2018+
CTS Turbo is pleased to offer the ultimate high flow throttle pipe kit for the MQB model range vehicles.  The OEM Charge pipping leaves something to be desired with inefficient bends, and blockages not optimized for performance.  The CTS Turbo throttle pipe increases the entire diameter to 2.5″ allowing for increased flow and greater performance.  The integrated water methanol bung (1/8″ NPT) allows for simple and straight forward installation of kits from Snow Performance.  All of the components included in the CTS throttle pipe kit work flawlessly together to provide increased efficiency, horsepower, and torque throughout the entire power band and an aggressive race inspired sound. Product Details:
  • Mandrel bent aluminum piping with durable black powder coating
  • CNC machined MAP flange
  • 4 Ply silicon connectors with stainless steel clamps
  • Integrated water methanol bung with plug
  • Stainless steel clamps
  • Compatible with factory and aftermarket intercoolers
CTS Turbo is proud to announce the release of the high-flow aluminum charge pipe for new generations of B58C engines in G-series BMW 3.0T engines and A90 Toyota Supra 3.0T The CTS Charge Pipe Kit offers more air flow than a factory pipe, OE-like fitment and peace of mind at any boost level. Our charge pipe kit will also improve the reliability of your B58C engine over the plastic stock part. You’ll notice an increase in throttle response and a decrease in turbo lag. It’s is a must for vehicles tuned to run higher than stock boost level. Product Details:
  • Precision CNC machined flanges for perfect fitment
  • T6061 Mandrel-Bent Aluminum Pipe
  • Robust Black Powdercoat Finish
  • 4 ply Silicon Connectors
  • Stainless Steel Clamps and Hardware
  • 2 x 1/8″ NPT Water-Methanol Bungs with plugs
  • Replaces BMW Part number 13718651066 (with 2 bolts on throttle body)
Make Model Year Generation
BMW 740i 2019 - 2020 G11
BMW 745e 2019 - 2020 G11
BMW M340i 2019 - 2021 G20
BMW X7 40i 2019 - 2020 G07
BMW Z4 M40i 2019 - 2022 G29
TOYOTA SUPRA 2020 A90
TOYOTA SUPRA 2021 A91
TOYOTA SUPRA 2022
FMINT24 is a performance intercooler for the MQB platforms with the EA888 GEN4 Engine. Produced, designed, and tested, at our headquarters in Gloucester UK. Throughout the development process we have strived to improve the efficiency and performance of the EA888 GEN4 engine. Our project brief was to develop an intercooler that utilised all of the available space in the original position of the OEM intercooler, and to ensure the inlet air temperature is reduced, without any negative effects on the boost pressure or engine and transmission cooling. In the MQB chassis the intercooler housing is particularly restricted and confined to a small amount of space, due to it not only housing the intercooler, but also the radiator and air conditioning condenser. The front panel in theory is a sandwich pack that houses the auxiliary cooling components. This means in order to increase the size of the intercooler without paying detriment to the performance of the surrounding items, and with also having very little extra space available, that it can be very difficult to execute the perfect blend of a high flow intercooler within such a close proximity.
Our research and development engineers started with a brief to fit our existing intercooler (FMMK7FMIC) that was for the MK7 platform, to our development VW MK8 Golf R. Upon installation, we then tried to establish if we could re-engineer the intercooler with an increased inlet and outlet size along with increasing the volumetric capacity to increase flow along with future proofing the design to work well with highly tuned stage 3 plus EA888 Gen 4 engines. Using a combination of scanning software and traditional measuring methods, the design was created. This was then fine-tuned by our flow dynamics simulations programs (CFD), and the end tanks were initially created by 3D printers. This enabled us to ensure the fit was perfect on the vehicle before any prototype castings or machined billet end tanks were produced ready for dyno testing.
Several baffle configurations were designed, and flow simulated to ensure the maximum performance was obtained to keep the core working at its optimum, along with ensuring all its cooling capabilities had been upheld, and that the total volume of the core internal is utilised for optimum performance. With an increase in inlet and outlet sizes, we then turned our attention to the design of our silicone hoses. With flow in mind, we have created a step within the hose so where the hose meets the hot and cold side of the inlet and outlet junctions the transition is seamless, this helps to lesson any disturbance to the airflow and prevent unwanted turbulence. To further aid with flow, the inlet and outlets have been increased to 76mm from the OEM size of 63mm which equates to a 45% increase in surface area.
The consideration of space and our clever design has led us to produce several intercooler cores with different fin configurations and internal capacities. Depending on the core design, testing results led us to choose a bar and plate design with over 83% more volume than the OEM intercooler, and with a frontal area increase of 10%.

Why do we test different cores?

Here at Forge Motorsport, when developing an intercooler, we will test several different cores for each application. For example, a bar and plate style core, a tube and fin style core along with different fin pitches and heights, as well as changing the internal fin pitches/shapes and density within the tube; thus enabling us to fine tune the amount of pressure drop the intercooler produces. Pressure drop is not always a bad thing, as our testing and research has proven on various projects. This is because the pressurized air velocity is being stalled by the pressure drop within the cooler thus allowing more time to cool the air within the cooler itself, as air passes through the non-pressurized face of the core, that is open to the atmosphere.
Too much pressure drop can of course have a problem on the higher performance engines as the intercooler reaches its maximum efficiency the turbo has to work a lot harder to force the air through the core. This in turn creates higher inlet air temps (IAT’s) due to the turbo creating more heat as it is over stressed and worked harder. No pressure drop can also prove to be inefficient as the cooler will not lower the charge temperature again resulting in higher inlet air temperatures. Dyno Results Testing was completed using Performance Remap in Gloucester with their VTEC 4-wheel drive dynamometer. This was to ensure all our data has been achieved with results as accurately as possible by an independent tuner. As you can see from the dyno results below, peak power was increased from stock by 11bhp and 20nm of torque at 5500RPM with the Forge Motorsport performance intercooler installed. The best news is that there are significant torque gains throughout the rev range, meaning that the car power will pick up quicker and pull the whole way through to redline, including an impressive gain in BHP from 5000 RPM TO 6500 RPM. Gains on vehicles with re calibrated software and further hardware performance parts can be expected to be a lot higher due to the substantial drop in IATS when FMINT24 is installed. During our extensive testing, we let the car heat soak on the dyno until the radiator fans tripped on and off (which gives an inlet temperature of around 40°C). We then did a dyno pull from this point which gives a more consistent result and reflects real-world driving conditions more accurately. You can easily see the Forge intercooler cools much quicker and delivers a much greater drop in temperature compared to OEM.
 
 
After more than six pulls on the dyno we still had super safe IAT’s, and the Forge Motorsport intercooler gave results of 34°C at 6548 RPM giving a reduction of 58% over the factory’s intercooler intake temps from 58°C at 6508 RPM. These tests took place in relatively hot conditions with an ambient dyno cell temperature of 23°C proving how inefficient the stock intercooler is. In the summer months, the stock intercooler along with higher inlet air temperatures will have a hugely negative impact on the engine’s performance. In these conditions, the engine management will retard the ignition, resulting in a lower powered engine as temperatures rise and the ECU then pulls out the timing to stop detonation. On a mapped vehicle, the results will be even more detrimental and can lead to possible premature engine wear. If you use your car for fast road or have a high-performance tune in a hot climate, this product is essential. 

Why do we try to decrease IAT's? (Inlet Air Temperature)

Temperature and volume of air supplied to your vehicles engine that is compressed by the turbo charger has a better effect on performance when cool as this is to provide the engine with more oxygen (denser air), thus improving the combustion in each cylinder. In addition, by regulating and reducing the air temperature, it also increases the reliability of an engine by keeping the AFRs (Air Fuel Ratios) in each cylinder at a safe level, which in turn, can increase an engines power due to the air being cooler. A bigger bang is then created within the cylinder, providing the correct amount of fuel is added. This can equate to an increase in BHP and torque.
 
 
​​​​ The Forge Motorsport intercooler is a perfect performance enhancing product that fits directly to the OEM mounting points, making for an easy install, in a relatively short period of time. No cutting of any components is needed, making the installation reversible if the vehicle needs to be returned to stock at any time in the future. The core and end tanks are finished in our black textured anti corrosion coating that also aids with its thermal properties and keeps the product looking that bit stealthier or OEM+. The Forge Motorsport lifetime warranty on all hardware products shows the trust we have in the quality of our products while they are being enjoyed on your pride and joy.
Compatible Vehicles :
 
Audi
  • S3
    • 2.0TSI (8Y Chassis)
    • Sportback 2.0TSI (8Y Chassis)
Volkswagen
  • Golf
    • MK8
      • Clubsport 45
      • GTI
      • R
 
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Brand

Forge Motorsport

Make

A3, Audi, Golf GTI, Golf R, Q2, S3, TT, TTS, Volkswagen

Model Year

2014, 2015, 2016, 2017, 2018, 2019

Brand

Racingline

Make

A3, Audi, Golf GTI, Golf R, S3, SQ2, TT, TTS, Volkswagen

Model Year

2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020

Brand

CTS Turbo

Make

Audi, Golf GTI, Golf R, S3, Volkswagen

Model Year

2015, 2016, 2017, 2018, 2019

Brand

CTS Turbo

Make

7 Series, BMW, M340i, Supra, Toyota, X7, Z4

Model Year

2019, 2020, 2021, 2022

Brand

Forge Motorsport

Make

Audi, Golf GTI, Golf R, S3, Volkswagen

Model Year

2020, 2021, 2022, 2023

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Main Menu Category Menu CONTACT DETAILS
What are you looking for in Vaglogic?
× How can I help you?