Forge Motorsport Uprated Intercooler for the EA888 2.0 TSI engine – FMMK7FMIC

SKU: FMMK7FMIC
In Stock

د.إ3,990.00

Upon placing the order, we will get in touch with you to confirm the availability information.

For Instant Enquiry and More Details, Please Click Here

In Stock
Add to Wishlist
Add to Wishlist

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist
Low Prices

Price match guarantee

Guaranteed Fitment.

Always the correct part

In-House Experts.

We know our products

Wide Product Selection

Endless Possibilities

Category:

Description

This is our intercooler for the Volkswagen Mk7 Golf, Mk7RTiguanAudi TT MK3 2.0 TSI and S3 8V, as well as the Skoda Kodiaq, fitted with the EA888 2.0 TSI engine. Volkswagen group changed just about everything from the Mk6 to the Mk7 chassis, so this core had to be designed from scratch in order to fit in with the redesigned radiator and condenser.

  • Gains of 16bhp
  • Temperature drops of 25-30°C
  • Reduced turbo lag, increased response
  • Greater overall surface area for greater heat dissipation
  • Utilising a race specification bar and plate construction air core
  • High flow cast end tanks ensuring optimum air transition for cooling efficiency
  • Dyno proven horsepower and torque gains
  • Provides smoother power curve
  • Dimensions: 650x420x50mm
  • Includes necessary hardware and instructions for installation

Designed for performance and reliability, the core fits in the stock location meaning cooling is radically improved over OEM. Our test Golf Mk7 GTI achieved gains of up to 16bhp more* without any other modifications whilst also demonstrating a consistent 25-30°C temperature drop* over stock on the dyno, with all runs performed on the same day with only a 2°C variation in ambient temperature over the runs (in fact it was 2°C hotter when we tested the Forge core). You can also see the temperature drop comparison of the stock and Forge cores in the graph below.

*gains will vary per car model and conditions

The stock core typically increased in temperature by 5°C on each subsequent run, with heat soak becoming a real issue after only three runs. The stock ECU was pulling timing and boost after only one run – typically anything over 40°C inlet temperature will cause the ECU to change ignition timing to suit – and the stock core peaked at 60°C on its first run, where the Forge core was able to get temperatures back under control after each run so that by the end of 4 back to back runs the core temperature had only risen by 4°C.

All of this was achieved on a stock car (it should be noted that although Volkswagen claim 220bhp for this new engine we have seen examples range from 230 to 240bhp completely stock, on the same rolling road). We are confident that the core will continue to deliver a much lower intake charge temperature than stock across all states of tune, as it’s based on our award winning Mk5/Mk6 intercooler which has been fitted with great success on everything from road and track cars, to full blown race and drag cars.

So, what other reasons do you have to purchase this intercooler? All Forge intercoolers are designed and hand fabricated in the UK to ensure perfect quality and fitment. Made in England, guaranteed for life. Combining our decades of experience in motorsport engineering and CAD flow simulation software, we have designed and tested the ultimate intercooler for your vehicle, incorporating the latest technology in bar and plate cores. The intercooler core is then complimented with our high flow end tanks. With the extra intercooler capacity, remapping your vehicle would bring further performance gains.

The core and end tanks are finished in black textured anti corrosion coating, which not only looks superb, but also gives this product added longevity in the harshest of environments. Our intercoolers are tested on the dyno against the stock cooler to measure the gains in power and reduction in temperatures. These tests are repeated until we are confident we can provide an industry leading product!

*Please note – This will not fit Audi S3 facelift 2017 onwards – Some modification to Audi S3 and TTS may be necessary*

⭐ Excellent product, fairly easy to fit, good kit, I also fitted the long inlet pipe. Professional company I would recommend happily, thanks again ⭐­

⭐­ One of the best Intercoolers. I think its better then other Aftermarket IC ⭐

⭐­ Simply high quality product. Ambient temp around 10 degree. During long acceleration temperature falling. We think its the best product in Europe ⭐­

Check out all the reviews here

Compatible Vehicles :

Audi
  • S3
    • 2.0 TSI (8V Chassis)
  • TT
    • Mk3
      • 2.0 TSI 2015 Onwards
  • TTS
    • Mk3 8S (2014-)
Volkswagen
  • Golf
    • MK7
      • GTI
      • GTI Clubsport ED40
      • R
    • MK7.5
      • GTI
      • R
  • Tiguan
    • 2.0 TSI 2017 Onwards

Reviews

There are no reviews yet.

Be the first to review “Forge Motorsport Uprated Intercooler for the EA888 2.0 TSI engine – FMMK7FMIC”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsForge Motorsport Uprated Intercooler for the EA888 2.0 TSI engine - FMMK7FMIC removeRACINGLINE OIL COOLER SYSTEM 2.0 TSI EA888 Gen.3 ENGINES – VWR18G700 removeCTS TURBO 4″ TURBO INLET PIPE FOR 8V AUDI RS3/8S AUDI TT-RS -CTS-HW-360 removeCTS TURBO AUDI/VW 6-SPEED MANUAL & DSG/S-TRONIC DQ250 TURBO OUTLET PIPE (GTI/GOLF R/A3/S3/TT) 2015+ MQB MODELS -CTS-IT-275 removeCTS TURBO CHARGE PIPE UPGRADE KIT FOR BMW G20/G29/G05/G07/G11 AND A90 TOYOTA SUPRA B58C 3.0L - CTS-IT-349 removeSnow Performance - Boost Cooler Stage 2E Power-Max - SP10250 remove
NameForge Motorsport Uprated Intercooler for the EA888 2.0 TSI engine - FMMK7FMIC removeRACINGLINE OIL COOLER SYSTEM 2.0 TSI EA888 Gen.3 ENGINES – VWR18G700 removeCTS TURBO 4″ TURBO INLET PIPE FOR 8V AUDI RS3/8S AUDI TT-RS -CTS-HW-360 removeCTS TURBO AUDI/VW 6-SPEED MANUAL & DSG/S-TRONIC DQ250 TURBO OUTLET PIPE (GTI/GOLF R/A3/S3/TT) 2015+ MQB MODELS -CTS-IT-275 removeCTS TURBO CHARGE PIPE UPGRADE KIT FOR BMW G20/G29/G05/G07/G11 AND A90 TOYOTA SUPRA B58C 3.0L - CTS-IT-349 removeSnow Performance - Boost Cooler Stage 2E Power-Max - SP10250 remove
Image
SKUFMMK7FMICVWR18G700CTS-HW-360CTS-IT-275CTS-IT-349SP10250
Rating
Priceد.إ3,990.00د.إ2,780.00د.إ1,380.00د.إ900.00د.إ1,300.00د.إ2,500.00
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

DescriptionUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereThis product will be in stock and available for purchase.  Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here
ContentThis is our intercooler for the Volkswagen Mk7 Golf, Mk7RTiguanAudi TT MK3 2.0 TSI and S3 8V, as well as the Skoda Kodiaq, fitted with the EA888 2.0 TSI engine. Volkswagen group changed just about everything from the Mk6 to the Mk7 chassis, so this core had to be designed from scratch in order to fit in with the redesigned radiator and condenser.
  • Gains of 16bhp
  • Temperature drops of 25-30°C
  • Reduced turbo lag, increased response
  • Greater overall surface area for greater heat dissipation
  • Utilising a race specification bar and plate construction air core
  • High flow cast end tanks ensuring optimum air transition for cooling efficiency
  • Dyno proven horsepower and torque gains
  • Provides smoother power curve
  • Dimensions: 650x420x50mm
  • Includes necessary hardware and instructions for installation
Designed for performance and reliability, the core fits in the stock location meaning cooling is radically improved over OEM. Our test Golf Mk7 GTI achieved gains of up to 16bhp more* without any other modifications whilst also demonstrating a consistent 25-30°C temperature drop* over stock on the dyno, with all runs performed on the same day with only a 2°C variation in ambient temperature over the runs (in fact it was 2°C hotter when we tested the Forge core). You can also see the temperature drop comparison of the stock and Forge cores in the graph below. *gains will vary per car model and conditions The stock core typically increased in temperature by 5°C on each subsequent run, with heat soak becoming a real issue after only three runs. The stock ECU was pulling timing and boost after only one run – typically anything over 40°C inlet temperature will cause the ECU to change ignition timing to suit – and the stock core peaked at 60°C on its first run, where the Forge core was able to get temperatures back under control after each run so that by the end of 4 back to back runs the core temperature had only risen by 4°C. All of this was achieved on a stock car (it should be noted that although Volkswagen claim 220bhp for this new engine we have seen examples range from 230 to 240bhp completely stock, on the same rolling road). We are confident that the core will continue to deliver a much lower intake charge temperature than stock across all states of tune, as it's based on our award winning Mk5/Mk6 intercooler which has been fitted with great success on everything from road and track cars, to full blown race and drag cars.
So, what other reasons do you have to purchase this intercooler? All Forge intercoolers are designed and hand fabricated in the UK to ensure perfect quality and fitment. Made in England, guaranteed for life. Combining our decades of experience in motorsport engineering and CAD flow simulation software, we have designed and tested the ultimate intercooler for your vehicle, incorporating the latest technology in bar and plate cores. The intercooler core is then complimented with our high flow end tanks. With the extra intercooler capacity, remapping your vehicle would bring further performance gains. The core and end tanks are finished in black textured anti corrosion coating, which not only looks superb, but also gives this product added longevity in the harshest of environments. Our intercoolers are tested on the dyno against the stock cooler to measure the gains in power and reduction in temperatures. These tests are repeated until we are confident we can provide an industry leading product! *Please note - This will not fit Audi S3 facelift 2017 onwards - Some modification to Audi S3 and TTS may be necessary* ⭐ Excellent product, fairly easy to fit, good kit, I also fitted the long inlet pipe. Professional company I would recommend happily, thanks again ⭐­ ⭐­ One of the best Intercoolers. I think its better then other Aftermarket IC ⭐ ⭐­ Simply high quality product. Ambient temp around 10 degree. During long acceleration temperature falling. We think its the best product in Europe ⭐­ Check out all the reviews here
Compatible Vehicles :
Audi
  • S3
    • 2.0 TSI (8V Chassis)
  • TT
    • Mk3
      • 2.0 TSI 2015 Onwards
  • TTS
    • Mk3 8S (2014-)
Volkswagen
  • Golf
    • MK7
      • GTI
      • GTI Clubsport ED40
      • R
    • MK7.5
      • GTI
      • R
  • Tiguan
    • 2.0 TSI 2017 Onwards

Racingline MQB VW Golf ‘R’/GTI 2.0 TSI OIL COOLER
FOR EA888 gen.3 & gen.4 ENGINES

The higher your power, the harder you drive, the more important it is to protect your oil with this Oil Cooler by RacingLine.
Racingline’s Oil Cooler kit is a complete ready to install package.  An essential for any hard-driven Golf Mk7 GTI or ‘R’ running high power levels, hot climates or on the track. Of course, adding power generates more heat to disperse. Significantly increased oil temperatures mean only one thing: a decrease in the ability for your engine to stay properly lubricated. The new Racingline kit solves this problem: by adding in an additional air to oil cooler positioned right in the airflow in front of the car, oil temperatures are reduced by around 15-20ºc (of course this varies dependent on factors such as how the car is being driven, ambient temperatures and state of tune). Unlike many oil cooler kits, this keeps the factory Oil to Water cooler in position – effectively doubling up on your cooling. As oil passes through the new cooler first, that means less heat transfer back into your car’s water coolant circuit too.

WHY FIT AN OIL COOLER KIT?

Our Oil Cooler Kit is an essential fit for any hard-driven MQB or MQB 'Evo' 2.0 TSI car running high power levels or in hot climates. It's a complete ready to install package, using a clever sandwich plate design for straightforward and reliable installation.

Adding power to these 2.0 TSI engines generates more heat to disperse.  Significantly increased oil temperatures means only one thing: a decrease in the ability for your engine to stay properly lubricated. At the same time, it's really important not to over-cool the oil; our 10-row kit is perfect.

  • Under hard driving, the stock oil cooler is easily overwhelmed. Failures start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade - losing its lubrication properties.
  • The RacingLine kit solves this problem: by adding in an additional air to oil cooler positioned right in the airflow in the front of the car, oil temperatures are reduced by around 15  - 20   degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune).
  • Our kit retains the factory oil to water cooler and adds to it with the front-mounted cooler - doubling up your cooling capability with less heat transfer into the water system.
  • As the oil moves away from the heat inside the engine, its temperature drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.
  • Supplied as a complete kit with every part ready for install.
What’s in the kit?  – Oil Cooler mounting brackets – AN10 ‘210 Series’ Nylon braided feed and return lines – Billet CNC oil cooler sandwich plate – AN10 ’10-Row’ Oil Cooler Core – Billet oil filter housing with removable drop in filter – Fitting kit consisting of all necessary nuts, bolts, washers and rubber mountings
CONFIRMED APPLICATIONS
>
VW Golf 8 GTI
2020+
>
VW Golf 8 GTI Clubsport
2020+
>
VW Golf 8 R
2020+
>
VW Golf 7 & 7.5 GTI & Clubsport
2013-2020
>
VW Golf 7 & 7.5 R
2013-2020
>
VW Golf 7 & 7.5 1.8 TSI
2013-2020
>
VW Passat 2.0 TSI B8
2015+
>
VW Arteon 2.0 TSI
2017+
>
VW T-Roc R 2.0 TSI
2019+
>
VW Tiguan II 2.0 TSI
2016+
>
VW Jetta / GLI 7
2018+
>
Audi S3 8Y
2020+
>
Audi A3 2.0 TSI 8Y
2020+
>
Audi S3 8V
2013-2020
>
Audi A3 2.0 TSI / 1.8 TSI 8V
2013-2020
>
Audi TT 2.0 TSI 8S
2014+
>
Audi TTS 2.0 TSI 8S
2015+
>
Audi SQ2
2018+
CTS Turbo is proud to announce our Cast Aluminum 4″ turbo inlet for 8V Audi RS3/8S Audi TT-RS The biggest issue with the restrictive factory inlet is apparent when you start to increase the power. Our engineers designed the turbo inlet to be as large as possible; yet still fit perfectly. This was accomplished using the latest in 3D scanning and rapid prototyping technology. This results in a 78% increase in volume over the stock turbo inlet. The larger inlet will provide increased flow to the turbo and make sure your 2.5T has all the air that it needs to operate at maximum capacity! This is one of the largest inlet pipes on the market AND it does not cost you a small fortune. Features:
  • 4″ cast aluminum turbo inlet pipe
  • Precision machined fitment for factory turbo (hybrid turbo fitments coming soon)
  • Factory-style PCV connection
  • Developed, tested and machined in-house
  • Compatible with most aftermarket intakes (3″-4″ reducer or 4″ coupler is required, confirm on vehicle)
  • Not recommended for use with factory air intake pipe (CTS Turbo high-flow pipe for stock air box is available separately)
Fitment:
  • 2018-2020 Audi 8V and 8V.2 (DAZA and DWNA)
  • 2017-2021 Audi TT-RS (DAZA and DWNA)
INSTALLATION GUIDE Does not fit Right Hand Drive vehicles. Coupler to attach intake is not included.

Model Generation:

AUDI RS3 2018 - 2020 8V

AUDITags TTRS 2017 - 2020 8S

CTS Turbo is pleased to release our high flow turbo outlet pipe kit for GTI/Golf R/Golf/GLI/A3/S3/TT 2015+ MQB Models.  The factory turbo outlet pipe is constructed from flimsy plastic and is quite narrow, which results in an extreme airflow restriction. The CTS Turbo high flow turbo outlet pipe kit is constructed from mandrel bent 2.5″ aluminum tubing.  The CTS Turbo high flow turbo outlet pipe kit also replaces all the factory charge piping between the turbocharge compressor housing and factory intercooler. Product Details:
  • Fully compatible with CTS BOSS kits
  • 2.5″ Aluminum piping
  • OEM style pipe bracket
  • High quality tig welds
  • Durable powder coat finish
  • Fits all MQB models (NOT for 7-speed DSG DQ381)
Hardware Included:
  • Upper turbo outlet pipe
  • Lower turbo outlet pipe
  • Silicone coupler
  • 2 x hose clamps
  • Installation hardware
CTS Turbo is proud to announce the release of the high-flow aluminum charge pipe for new generations of B58C engines in G-series BMW 3.0T engines and A90 Toyota Supra 3.0T The CTS Charge Pipe Kit offers more air flow than a factory pipe, OE-like fitment and peace of mind at any boost level. Our charge pipe kit will also improve the reliability of your B58C engine over the plastic stock part. You’ll notice an increase in throttle response and a decrease in turbo lag. It’s is a must for vehicles tuned to run higher than stock boost level. Product Details:
  • Precision CNC machined flanges for perfect fitment
  • T6061 Mandrel-Bent Aluminum Pipe
  • Robust Black Powdercoat Finish
  • 4 ply Silicon Connectors
  • Stainless Steel Clamps and Hardware
  • 2 x 1/8″ NPT Water-Methanol Bungs with plugs
  • Replaces BMW Part number 13718651066 (with 2 bolts on throttle body)
Make Model Year Generation
BMW 740i 2019 - 2020 G11
BMW 745e 2019 - 2020 G11
BMW M340i 2019 - 2021 G20
BMW X7 40i 2019 - 2020 G07
BMW Z4 M40i 2019 - 2022 G29
TOYOTA SUPRA 2020 A90
TOYOTA SUPRA 2021 A91
TOYOTA SUPRA 2022
Boost Cooler water injection can achieve a power increase of up to 10-25% in turbo and supercharged engines without thermally overloading the engine. The charge air temperature is lowered by up to 60°C, the combustion chamber is cooled and the thermal load on already tuned vehicles is effectively reduced. Water or water/alcohol (methanol or ethanol) is injected at high pressure into the hot charge air in a finely atomised form as soon as the desired starting charge pressure is reached. The evaporating liquid achieves an extremely effective charge air and intercooling, which, among other things, prevents uncontrolled combustion ("knocking"). The effect is demonstrably comparable with 116 octane racing petrol. The Boost Cooler is unsurpassed in atomisation! The liquid is swirled inside the Hyper-Sonic atomiser nozzle at supersonic speed before being forced through the Venturi orifice. With the included Dual Stage Upgrade, 2 atomiser nozzles are used to inject as early as possible with the primary nozzle and to achieve maximum cooling and performance in peak loads with the switched-on 2nd nozzle.
  • Boost pressure-dependent injection control - Optimal for all centrifugal compressors (Procharger, Vortech) and large turbochargers
  • Higher boost pressure and/or more aggressive ignition without knocking combustion - additional power up to 25% possible.
  • Dual Stage technology for maximum efficiency in all load ranges
  • Octane booster, 116 octane racing fuel performance possible with regular gas
  • Earlier ignition timing or compression without knocking combustion. Up to 25% more power possible.
  • More power and torque with simultaneous reduction of the thermal load on engines that have already been modified, e.g. by chip tuning, NOS or LPG/autogas.
  • Effective intake air cooling, compensation of power losses at higher outside temperatures
  • Reduction of the specific fuel consumption.
  • Deposit-free combustion chamber and intake tract, without formation of oil carbon.
  • Easy installation
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Brand

Racingline

Make

A3, Audi, Golf GTI, Golf R, S3, SQ2, TT, TTS, Volkswagen

Model Year

2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

Brand

CTS Turbo

Make

Audi, RS3, TTRS

Model Year

2017, 2018, 2019, 2020

Brand

CTS Turbo

Make

Audi, Golf GTI, Golf R, S3, Volkswagen

Model Year

2015, 2016, 2017, 2018, 2019

Brand

CTS Turbo

Make

7 Series, BMW, M340i, Supra, Toyota, X7, Z4

Model Year

2019, 2020, 2021, 2022

Brand

Snow Performance

Make

AMG C63, AMG E63, AMG G63, AMG GT/GTS/GTR/GTC, AMG S63, Audi, Golf GTI, Golf R, Mercedes-Benz, R8, RS3, RS4, RS5, RS6, RS7, S3, S4, S5, S6, S7, S8, Supra, Toyota, Volkswagen

Model Year

2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Main Menu Category Menu CONTACT DETAILS
What are you looking for in Vaglogic?
× How can I help you?