Forge Motorsport Uprated Intercooler for the EA888 2.0 TSI engine – FMMK7FMIC
د.إ3,990.00
Upon placing the order, we will get in touch with you to confirm the availability information.
For Instant Enquiry and More Details, Please Click Here
Did you like this product? Add to favorites now and follow the product.
Description
This is our intercooler for the Volkswagen Mk7 Golf, Mk7R, Tiguan, Audi TT MK3 2.0 TSI and S3 8V, as well as the Skoda Kodiaq, fitted with the EA888 2.0 TSI engine. Volkswagen group changed just about everything from the Mk6 to the Mk7 chassis, so this core had to be designed from scratch in order to fit in with the redesigned radiator and condenser.
- Gains of 16bhp
- Temperature drops of 25-30°C
- Reduced turbo lag, increased response
- Greater overall surface area for greater heat dissipation
- Utilising a race specification bar and plate construction air core
- High flow cast end tanks ensuring optimum air transition for cooling efficiency
- Dyno proven horsepower and torque gains
- Provides smoother power curve
- Dimensions: 650x420x50mm
- Includes necessary hardware and instructions for installation
Designed for performance and reliability, the core fits in the stock location meaning cooling is radically improved over OEM. Our test Golf Mk7 GTI achieved gains of up to 16bhp more* without any other modifications whilst also demonstrating a consistent 25-30°C temperature drop* over stock on the dyno, with all runs performed on the same day with only a 2°C variation in ambient temperature over the runs (in fact it was 2°C hotter when we tested the Forge core). You can also see the temperature drop comparison of the stock and Forge cores in the graph below.
*gains will vary per car model and conditions
The stock core typically increased in temperature by 5°C on each subsequent run, with heat soak becoming a real issue after only three runs. The stock ECU was pulling timing and boost after only one run – typically anything over 40°C inlet temperature will cause the ECU to change ignition timing to suit – and the stock core peaked at 60°C on its first run, where the Forge core was able to get temperatures back under control after each run so that by the end of 4 back to back runs the core temperature had only risen by 4°C.
All of this was achieved on a stock car (it should be noted that although Volkswagen claim 220bhp for this new engine we have seen examples range from 230 to 240bhp completely stock, on the same rolling road). We are confident that the core will continue to deliver a much lower intake charge temperature than stock across all states of tune, as it’s based on our award winning Mk5/Mk6 intercooler which has been fitted with great success on everything from road and track cars, to full blown race and drag cars.
So, what other reasons do you have to purchase this intercooler? All Forge intercoolers are designed and hand fabricated in the UK to ensure perfect quality and fitment. Made in England, guaranteed for life. Combining our decades of experience in motorsport engineering and CAD flow simulation software, we have designed and tested the ultimate intercooler for your vehicle, incorporating the latest technology in bar and plate cores. The intercooler core is then complimented with our high flow end tanks. With the extra intercooler capacity, remapping your vehicle would bring further performance gains.
The core and end tanks are finished in black textured anti corrosion coating, which not only looks superb, but also gives this product added longevity in the harshest of environments. Our intercoolers are tested on the dyno against the stock cooler to measure the gains in power and reduction in temperatures. These tests are repeated until we are confident we can provide an industry leading product!
*Please note – This will not fit Audi S3 facelift 2017 onwards – Some modification to Audi S3 and TTS may be necessary*
⭐ Excellent product, fairly easy to fit, good kit, I also fitted the long inlet pipe. Professional company I would recommend happily, thanks again ⭐
⭐ One of the best Intercoolers. I think its better then other Aftermarket IC ⭐
⭐ Simply high quality product. Ambient temp around 10 degree. During long acceleration temperature falling. We think its the best product in Europe ⭐
Check out all the reviews here
Compatible Vehicles :
Quick Comparison
Settings | Forge Motorsport Uprated Intercooler for the EA888 2.0 TSI engine - FMMK7FMIC remove | CTS TURBO VW MQB MK8 GTI/GOLF R DIRECT FIT INTERCOOLER -CTS-20T-MK8-DF remove | CTS TURBO HIGH-PERFORMANCE RADIATOR FOR VW/AUDI MK7/8V/8S MQB (EA888.3) -CTS-HX-007 remove | CTS TURBO 4″ TURBO INLET PIPE FOR 8V AUDI RS3/8S AUDI TT-RS -CTS-HW-360 remove | CSF’s New W205 AMG Auxiliary Radiators (CSF #8187) -CSF8187 remove | CTS MK6 GOLF R 2.0T DIRECT FIT FMIC KIT -CTS-20T-GR-DF remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | Forge Motorsport Uprated Intercooler for the EA888 2.0 TSI engine - FMMK7FMIC remove | CTS TURBO VW MQB MK8 GTI/GOLF R DIRECT FIT INTERCOOLER -CTS-20T-MK8-DF remove | CTS TURBO HIGH-PERFORMANCE RADIATOR FOR VW/AUDI MK7/8V/8S MQB (EA888.3) -CTS-HX-007 remove | CTS TURBO 4″ TURBO INLET PIPE FOR 8V AUDI RS3/8S AUDI TT-RS -CTS-HW-360 remove | CSF’s New W205 AMG Auxiliary Radiators (CSF #8187) -CSF8187 remove | CTS MK6 GOLF R 2.0T DIRECT FIT FMIC KIT -CTS-20T-GR-DF remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||
Image | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ||||||||||||||||||||||||||||||||||||||||||||||||||||
SKU | FMMK7FMIC | CTS-20T-MK8-DF | CTS-HX-007 | CTS-HW-360 | CSF8187 | CTS-20T-GR-DF | ||||||||||||||||||||||||||||||||||||||||||||||||||||
Rating | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Price | د.إ3,990.00 | د.إ3,900.00 | د.إ2,400.00 | د.إ1,380.00 | د.إ3,400.00 | د.إ4,210.00 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
Stock | In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
Availability | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock | ||||||||||||||||||||||||||||||||||||||||||||||||||||
Add to cart | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Description | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | ||||||||||||||||||||||||||||||||||||||||||||||||||||
Content | This is our intercooler for the Volkswagen Mk7 Golf, Mk7R, Tiguan, Audi TT MK3 2.0 TSI and S3 8V, as well as the Skoda Kodiaq, fitted with the EA888 2.0 TSI engine. Volkswagen group changed just about everything from the Mk6 to the Mk7 chassis, so this core had to be designed from scratch in order to fit in with the redesigned radiator and condenser.
![]() ![]() ![]() ![]() ![]() ![]() ![]() Compatible Vehicles : | This is the CTS Turbo Direct-Fit intercooler upgrade for VW MQB MK8 GOLF GTI/GOLF R with updated BLACK finish.
It is important to upgrade your intercooler to keep the AIT low and your car running at it’s best. Heat soak from stock or inferior intercoolers will rob you of performance and could lead to pinging/timing pull.
CTS Turbo premium intercooler upgrade is a direct replacement for your factory intercooler. Our intercooler allows you to keep the charged air cold and keep your power consistent. High flowing core allows for minimal pressure drop and allows air to pass through to the radiator.
Silicone hoses are included!
Features:
| CTS Turbo is proud to announce our Upgraded Aluminum Radiator for the VW/Audi MQB 1.8TSI and 2.0TSI vehicles.
The factory radiator is small and not efficient enough to provide sufficient cooling to tuned engines. We designed our radiator to overcome that problem. CTS Turbo radiator has an increased volume over stock, with a dual-pass core was made to be higher flowing and larger than the factory, but still drop into the stock location using all the factory mounting points. To make things even better, this part will eliminate plastic endtanks that are prone to leaks.
Keep your MQB running cool and reliably with CTS Turbo Aluminum Radiator.
Features:
| CTS Turbo is proud to announce our Cast Aluminum 4″ turbo inlet for 8V Audi RS3/8S Audi TT-RS
The biggest issue with the restrictive factory inlet is apparent when you start to increase the power. Our engineers designed the turbo inlet to be as large as possible; yet still fit perfectly. This was accomplished using the latest in 3D scanning and rapid prototyping technology. This results in a 78% increase in volume over the stock turbo inlet.
The larger inlet will provide increased flow to the turbo and make sure your 2.5T has all the air that it needs to operate at maximum capacity! This is one of the largest inlet pipes on the market AND it does not cost you a small fortune.
Features:
Model Generation:AUDI RS3 2018 - 2020 8VAUDITags TTRS 2017 - 2020 8S | The High-Performance All-Aluminum Auxiliary Radiators work in conjunction with the rest of the cooling system to reduce temperatures throughout. This is critical as the Auxiliary Radiators not only help keep engine water temperatures lower, but also are utilized as the heat exchange medium in the air-to-water charge-air coolers for the turbocharger system to reduce intake air temperatures (IATs). Overall, the Auxiliary Radiators larger capacity prolongs the heat soak threshold and assists in keeping temperatures in optimal ranges.
CSF W205 AMG Auxiliary Radiators Features (CSF #8187):
| The CTS MK6 2.0T Direct Fit FMIC Kit is designed as a drop in replacement for the OEM front mounted intercooler (FMIC). That means you can install this kit without any trimming or modification of the bumper. The OEM FMIC is adequate for stock boost levels, however once boost levels are increased by way of ECU upgrades/chipping the OEM FMIC struggles to keep the charged air temperatures in check. Higher charged air temperatures can result in boost cut and timing pull, both reducing the amount of power your vehicle produces.
The CTS direct fit FMIC uses a high efficiency bar and plate intercooler core, which aids in reducing pressure drop. Reducing pressure drop means that your turbo will not have to work as hard to make a given level of boost. If your turbo makes 30psi of boost pressure in the turbocharger, and your intercooler has a 10psi pressure drop then the boost measured by your ECU would be (30psi – 10psi) = 20psi. With an efficient FMIC like the CTS direct fit FMIC your turbo does not have to work as hard to reach desired boost levels. This is beneficial in two ways, the turbo life expectancy is increased due to more efficient operation, and boost leaving the turbocharger is cooler and more dense resulting in more power to the ground.
Product Details:
– Efficient bar and plate construction
– Direct bolt-in installation
– 4-ply silicon hoses and billet adapter to turbo outlet pipe
– High quality stainless steel clamps
– Low pressure drop
– Maintains factory mounting points
– No trimming of bumper or crash supports
– Rated for power levels in excess of 600HP
– Core dimensions: 23.00 Length x 2.00″ Tall x 16.5″ Height
– Cast aluminium end tanks with mounting points that are CAST into the end tank, NOT welded like inferior intercoolers
Fitment:
2012-2013 VW Golf R 2.0T
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
Weight | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||||||
Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||||||
Additional information |
|
|
|
|
|
Reviews
There are no reviews yet.