Forge Motorsport Uprated Intercooler for the EA888 2.0 TSI engine – FMMK7FMIC

SKU: FMMK7FMIC
In Stock

د.إ3,990.00

Upon placing the order, we will get in touch with you to confirm the availability information.

For Instant Enquiry and More Details, Please Click Here

In Stock
Add to Wishlist
Add to Wishlist

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist
Low Prices

Price match guarantee

Guaranteed Fitment.

Always the correct part

In-House Experts.

We know our products

Wide Product Selection

Endless Possibilities

Category:

Description

This is our intercooler for the Volkswagen Mk7 Golf, Mk7RTiguanAudi TT MK3 2.0 TSI and S3 8V, as well as the Skoda Kodiaq, fitted with the EA888 2.0 TSI engine. Volkswagen group changed just about everything from the Mk6 to the Mk7 chassis, so this core had to be designed from scratch in order to fit in with the redesigned radiator and condenser.

  • Gains of 16bhp
  • Temperature drops of 25-30°C
  • Reduced turbo lag, increased response
  • Greater overall surface area for greater heat dissipation
  • Utilising a race specification bar and plate construction air core
  • High flow cast end tanks ensuring optimum air transition for cooling efficiency
  • Dyno proven horsepower and torque gains
  • Provides smoother power curve
  • Dimensions: 650x420x50mm
  • Includes necessary hardware and instructions for installation

Designed for performance and reliability, the core fits in the stock location meaning cooling is radically improved over OEM. Our test Golf Mk7 GTI achieved gains of up to 16bhp more* without any other modifications whilst also demonstrating a consistent 25-30°C temperature drop* over stock on the dyno, with all runs performed on the same day with only a 2°C variation in ambient temperature over the runs (in fact it was 2°C hotter when we tested the Forge core). You can also see the temperature drop comparison of the stock and Forge cores in the graph below.

*gains will vary per car model and conditions

The stock core typically increased in temperature by 5°C on each subsequent run, with heat soak becoming a real issue after only three runs. The stock ECU was pulling timing and boost after only one run – typically anything over 40°C inlet temperature will cause the ECU to change ignition timing to suit – and the stock core peaked at 60°C on its first run, where the Forge core was able to get temperatures back under control after each run so that by the end of 4 back to back runs the core temperature had only risen by 4°C.

All of this was achieved on a stock car (it should be noted that although Volkswagen claim 220bhp for this new engine we have seen examples range from 230 to 240bhp completely stock, on the same rolling road). We are confident that the core will continue to deliver a much lower intake charge temperature than stock across all states of tune, as it’s based on our award winning Mk5/Mk6 intercooler which has been fitted with great success on everything from road and track cars, to full blown race and drag cars.

So, what other reasons do you have to purchase this intercooler? All Forge intercoolers are designed and hand fabricated in the UK to ensure perfect quality and fitment. Made in England, guaranteed for life. Combining our decades of experience in motorsport engineering and CAD flow simulation software, we have designed and tested the ultimate intercooler for your vehicle, incorporating the latest technology in bar and plate cores. The intercooler core is then complimented with our high flow end tanks. With the extra intercooler capacity, remapping your vehicle would bring further performance gains.

The core and end tanks are finished in black textured anti corrosion coating, which not only looks superb, but also gives this product added longevity in the harshest of environments. Our intercoolers are tested on the dyno against the stock cooler to measure the gains in power and reduction in temperatures. These tests are repeated until we are confident we can provide an industry leading product!

*Please note – This will not fit Audi S3 facelift 2017 onwards – Some modification to Audi S3 and TTS may be necessary*

⭐ Excellent product, fairly easy to fit, good kit, I also fitted the long inlet pipe. Professional company I would recommend happily, thanks again ⭐­

⭐­ One of the best Intercoolers. I think its better then other Aftermarket IC ⭐

⭐­ Simply high quality product. Ambient temp around 10 degree. During long acceleration temperature falling. We think its the best product in Europe ⭐­

Check out all the reviews here

Compatible Vehicles :

Audi
  • S3
    • 2.0 TSI (8V Chassis)
  • TT
    • Mk3
      • 2.0 TSI 2015 Onwards
  • TTS
    • Mk3 8S (2014-)
Volkswagen
  • Golf
    • MK7
      • GTI
      • GTI Clubsport ED40
      • R
    • MK7.5
      • GTI
      • R
  • Tiguan
    • 2.0 TSI 2017 Onwards

Reviews

There are no reviews yet.

Be the first to review “Forge Motorsport Uprated Intercooler for the EA888 2.0 TSI engine – FMMK7FMIC”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsForge Motorsport Uprated Intercooler for the EA888 2.0 TSI engine - FMMK7FMIC removeRACINGLINE OIL MANAGEMENT SYSTEM (CATCH CAN) 2.0TSI EA888 Gen.3 – VWR13G700 removeForge Motorsport High Flow Discharge Pipe for 1.8T and 2.0T VAG Engines - FMMK7DP removeCTS TURBO MK8 GOLF R/ AUDI 8Y S3 TURBO OUTLET PIPE -CTS-IT-956 removeCTS TURBO MK7/7.5 THROTTLE PIPE (GTI/GOLF R/GOLF GTI/A3/S3/TT) 2015+ MQB MODELS -CTS-IT-280 removeCSF’s New W205 AMG Auxiliary Radiators (CSF #8187) -CSF8187 remove
NameForge Motorsport Uprated Intercooler for the EA888 2.0 TSI engine - FMMK7FMIC removeRACINGLINE OIL MANAGEMENT SYSTEM (CATCH CAN) 2.0TSI EA888 Gen.3 – VWR13G700 removeForge Motorsport High Flow Discharge Pipe for 1.8T and 2.0T VAG Engines - FMMK7DP removeCTS TURBO MK8 GOLF R/ AUDI 8Y S3 TURBO OUTLET PIPE -CTS-IT-956 removeCTS TURBO MK7/7.5 THROTTLE PIPE (GTI/GOLF R/GOLF GTI/A3/S3/TT) 2015+ MQB MODELS -CTS-IT-280 removeCSF’s New W205 AMG Auxiliary Radiators (CSF #8187) -CSF8187 remove
Image
SKUFMMK7FMICVWR13G700FMMK7DPCTS-IT-956CTS-IT-280CSF8187
Rating
Priceد.إ3,990.00د.إ2,920.00د.إ1,050.00د.إ980.00د.إ950.00د.إ3,400.00
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

DescriptionUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereThis product will be in stock and available for purchase.  Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here
ContentThis is our intercooler for the Volkswagen Mk7 Golf, Mk7RTiguanAudi TT MK3 2.0 TSI and S3 8V, as well as the Skoda Kodiaq, fitted with the EA888 2.0 TSI engine. Volkswagen group changed just about everything from the Mk6 to the Mk7 chassis, so this core had to be designed from scratch in order to fit in with the redesigned radiator and condenser.
  • Gains of 16bhp
  • Temperature drops of 25-30°C
  • Reduced turbo lag, increased response
  • Greater overall surface area for greater heat dissipation
  • Utilising a race specification bar and plate construction air core
  • High flow cast end tanks ensuring optimum air transition for cooling efficiency
  • Dyno proven horsepower and torque gains
  • Provides smoother power curve
  • Dimensions: 650x420x50mm
  • Includes necessary hardware and instructions for installation
Designed for performance and reliability, the core fits in the stock location meaning cooling is radically improved over OEM. Our test Golf Mk7 GTI achieved gains of up to 16bhp more* without any other modifications whilst also demonstrating a consistent 25-30°C temperature drop* over stock on the dyno, with all runs performed on the same day with only a 2°C variation in ambient temperature over the runs (in fact it was 2°C hotter when we tested the Forge core). You can also see the temperature drop comparison of the stock and Forge cores in the graph below. *gains will vary per car model and conditions The stock core typically increased in temperature by 5°C on each subsequent run, with heat soak becoming a real issue after only three runs. The stock ECU was pulling timing and boost after only one run – typically anything over 40°C inlet temperature will cause the ECU to change ignition timing to suit – and the stock core peaked at 60°C on its first run, where the Forge core was able to get temperatures back under control after each run so that by the end of 4 back to back runs the core temperature had only risen by 4°C. All of this was achieved on a stock car (it should be noted that although Volkswagen claim 220bhp for this new engine we have seen examples range from 230 to 240bhp completely stock, on the same rolling road). We are confident that the core will continue to deliver a much lower intake charge temperature than stock across all states of tune, as it's based on our award winning Mk5/Mk6 intercooler which has been fitted with great success on everything from road and track cars, to full blown race and drag cars.
So, what other reasons do you have to purchase this intercooler? All Forge intercoolers are designed and hand fabricated in the UK to ensure perfect quality and fitment. Made in England, guaranteed for life. Combining our decades of experience in motorsport engineering and CAD flow simulation software, we have designed and tested the ultimate intercooler for your vehicle, incorporating the latest technology in bar and plate cores. The intercooler core is then complimented with our high flow end tanks. With the extra intercooler capacity, remapping your vehicle would bring further performance gains. The core and end tanks are finished in black textured anti corrosion coating, which not only looks superb, but also gives this product added longevity in the harshest of environments. Our intercoolers are tested on the dyno against the stock cooler to measure the gains in power and reduction in temperatures. These tests are repeated until we are confident we can provide an industry leading product! *Please note - This will not fit Audi S3 facelift 2017 onwards - Some modification to Audi S3 and TTS may be necessary* ⭐ Excellent product, fairly easy to fit, good kit, I also fitted the long inlet pipe. Professional company I would recommend happily, thanks again ⭐­ ⭐­ One of the best Intercoolers. I think its better then other Aftermarket IC ⭐ ⭐­ Simply high quality product. Ambient temp around 10 degree. During long acceleration temperature falling. We think its the best product in Europe ⭐­ Check out all the reviews here
Compatible Vehicles :
Audi
  • S3
    • 2.0 TSI (8V Chassis)
  • TT
    • Mk3
      • 2.0 TSI 2015 Onwards
  • TTS
    • Mk3 8S (2014-)
Volkswagen
  • Golf
    • MK7
      • GTI
      • GTI Clubsport ED40
      • R
    • MK7.5
      • GTI
      • R
  • Tiguan
    • 2.0 TSI 2017 Onwards
The Racingline Performance Oil Catch Tank & Oil Management System is the ultimate oil separating catch can system for MQB EA888 Gen3 2.0T engine cars.
Not all catch cans are created equal. The Racingline Performance system has a dual function: as well as routing undesirable oil and moisture vapours through a sophisticated system of internal baffles and a fully baffled catch can, the Racingline Performance Oil Catch Can System also takes our track & motorsport experience of these engines to correct the problem of oil build-up in the top of the engine during high-G braking. The kit includes our Engine Breather Plate – just as the Golf and SEAT TCR EA888 touring cars use to avoid the oil surge issue. So not only does the Racingline Peformance Oil Management System condense these vapours into the bottom of the tank, keeping a purer air/fuel mixture and avoiding the problem of slowly filling intercooler and intake pipework with oil. The Engine Breather Plate included in the kit also protects your engine by helping to eradicate oil starvation in very high G braking – an issue when used on track, leading to several engine failures in Racingline Performance UK’s testing experience.
CONFIRMED APPLICATIONS
>
VW Golf 7 & 7.5 GTI & Clubsport
2013-2020
>
VW Golf 7 & 7.5 R
2013-2020
>
VW Golf 7 & 7.5 1.8 TSI
2013-2020
>
VW Passat 2.0 TSI B8
2015+
>
VW Arteon 2.0 TSI
2017+
>
VW T-Roc R 2.0 TSI
2019+
>
VW Tiguan II 2.0 TSI
2016+
>
VW Jetta / GLI 7
2018+
>
Audi S3 8V
2013-2020
>
Audi A3 2.0 TSI / 1.8 TSI 8V
2013-2020
>
Audi TT 2.0 TSI 8S
2014+
>
Audi TTS 2.0 TSI 8S
2015+
>
Audi SQ2
2018+
Designed as a direct replacement for the OEM plastic discharge pipe (Part No. 5Q0145840) used on 1.8T and 2.0T engines found in various VW, Audi, Seat and Skoda models. Full mandrel bent single piece hard pipe with larger bore size for increased flow. This ensures high amounts of air are discharged from the turbo charger and therefore releasing the full potential of your engines capabilities. Unlike the OEM discharge pipe that is prone to failure from increased boost or many heat cycles, the Forge Motorsport high flow discharge pipe will not crack or fail - ever. This is backed up by our no quibble Lifetime warranty.
 
 
 
Supplied in black powder coated finish for that OEM look with a choice of hose colours red, blue, or black to compliment the look of your engine bay. No modifications to original equipment are necessary to install this part. This will fit with the stock turbo muffler or with the Forge Motorsport Muffler Delete FMMD2 which will further enhance the benefits of this discharge pipe.   In the box: Hard pipe Silicone Hose Hose Clamps   *NOT COMPATIBLE WITH 7-SPEED DSG MODELS
Compatible Vehicles :
 
Audi
  • A3
    • 1.8/2.0 TSI 2015 Onwards
  • Q2
    • 2.0 2017-2021
  • S3
    • 2.0 TSI (8V Chassis)
  • TT
    • Mk3
      • 2.0 TSI 2015 Onwards
  • TTS
    • Mk3 8S (2014-)
Volkswagen
  • Arteon
    • 2.0 TSI
  • Golf
    • MK7
      • 1.8 TFSI
      • GTI
      • GTI Clubsport ED40
      • R
    • MK7.5
      • GTI
      • R
  • T-Roc
    • 2.0 2018-2021
  • Touran
    • 1.8 TFSI
 
Introducing our high-performance Turbo Outlet Pipe specifically designed for the MK8 Golf R and Audi 8Y S3 models. Engineered to deliver exceptional results, our kit replaces the stock turbo outlet pipe with a more efficient and durable design, resulting in impressive airflow improvements, reduced turbulence, and enhanced overall performance gains. Crafted from mandrel-bent 60mm aluminum tubing, our Turbo Outlet Pipe guarantees optimal airflow without restrictions. This design ensures a smooth and efficient path, allowing the turbocharger to spool up faster and generate increased power. With our custom 5-ply silicone coupler, installation becomes a breeze, providing a hassle-free upgrade experience. We understand the importance of reliability and durability. That’s why our Turbo Outlet Pipe is meticulously engineered using high-quality materials, ensuring long-lasting performance under extreme temperatures and pressures. You can trust our product to withstand the demands of high-performance driving, allowing you to enjoy its benefits for years to come. Upgrade your MK8 Golf R or Audi 8Y S3 with our Turbo Outlet Pipe and unleash the true potential of your vehicle. Experience smoother power delivery and improved performance. Product Details:
  • 60mm aluminum piping with CTS logo
  • 5-ply silicon coupler
  • Factory mounting points are used for perfect fitment
  • Durable black powder coat finish
  • Compatible with factory and upgraded intakes
  • Compatible with factory and upgraded intercooler
Fitment:
  • 2021+ Audi 8Y S3
  • 2021+ MK8 Golf R
Make Model Year Generation
AUDI S3 2021 - 2023 8Y
VW GOLF R 2021 - 2023 MK8
CTS Turbo is pleased to offer the ultimate high flow throttle pipe kit for the MQB model range vehicles.  The OEM Charge pipping leaves something to be desired with inefficient bends, and blockages not optimized for performance.  The CTS Turbo throttle pipe increases the entire diameter to 2.5″ allowing for increased flow and greater performance.  The integrated water methanol bung (1/8″ NPT) allows for simple and straight forward installation of kits from Snow Performance.  All of the components included in the CTS throttle pipe kit work flawlessly together to provide increased efficiency, horsepower, and torque throughout the entire power band and an aggressive race inspired sound. Product Details:
  • Mandrel bent aluminum piping with durable black powder coating
  • CNC machined MAP flange
  • 4 Ply silicon connectors with stainless steel clamps
  • Integrated water methanol bung with plug
  • Stainless steel clamps
  • Compatible with factory and aftermarket intercoolers
The High-Performance All-Aluminum Auxiliary Radiators work in conjunction with the rest of the cooling system to reduce temperatures throughout. This is critical as the Auxiliary Radiators not only help keep engine water temperatures lower, but also are utilized as the heat exchange medium in the air-to-water charge-air coolers for the turbocharger system to reduce intake air temperatures (IATs). Overall, the Auxiliary Radiators larger capacity prolongs the heat soak threshold and assists in keeping temperatures in optimal ranges.

CSF W205 AMG Auxiliary Radiators Features (CSF #8187):

  • Sold Individually – Vehicles With 2 Aux. Radiators Must Purchase Qty. 2
  • 2-Row High-Performance Core Featuring CSF’s B-Tube Technology
  • Core Features Ultra Efficient 6.5mm Tall Fins with a Multi-Louvered Design for Maximum Surface Area Contact
  • Approx. Double the Capacity of OEM (~100% More Capacity – OEM 26mm Core vs. CSF 42mm Core)
  • 100% All-Aluminum TIG-Welded Construction
  • CNC Machined Mounting Brackets and OEM Style “Quick Connect” Inlet/Outlet
  • Includes Detachable Rock Guard
  • Multi-Fit – Fits Both Left & Right Side (For Vehicles With One or Two Auxiliary Radiators)
  • True “Drop-in Fit” Requires No Modifications to Install
  • Individually Leak and Pressure Tested
  • High-Performance Upgrade Suitable for Professional Racing, Street Performance, or OEM Replacement
  • 1 Hour “Mirror Finish” Hand Polish
  • 2 Year Limited Warranty
  • Applications:
    • 17 Mercedes AMG GT – R190 (Fits Left & Right – 2 Per Vehicle)
    • 16-17 Mercedes Benz AMG GT S – R190 (Fits Left & Right – 2 Per Vehicle)
    • 16-21 Mercedes Benz C 63 AMG – W205 (1 Per Vehicle)
    • 15-21 Mercedes Benz C 63 AMG S – W205 (Fits Left & Right – 2 Per Vehicle)
    • 16-19 Mercedes Benz GLE 63 AMG – X292 (Fits Left & Right – 2 Per Vehicle)
    • 16-19 Mercedes Benz GLE 63 AMG S – X292 (Fits Left & Right – 2 Per Vehicle)
    • 17-19 Mercedes Benz GLS 63 AMG – X292 (Fits Left & Right – 2 Per Vehicle)
  • OEM Part Number:
    • Mercedes: 099-500–59-03
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Brand

Racingline

Make

A3, Audi, Golf GTI, Golf R, RS3, S3, SQ2, TT, TTS, Volkswagen

Model Year

2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020

Brand

Forge Motorsport

Make

A3, Audi, Golf GTI, Golf R, Q2, S3, TT, TTS, Volkswagen

Model Year

2014, 2015, 2016, 2017, 2018, 2019

Brand

CTS Turbo

Make

Audi, Golf R, S3, Volkswagen

Model Year

2021, 2022, 2023

Brand

CTS Turbo

Make

Audi, Golf GTI, Golf R, S3, Volkswagen

Model Year

2015, 2016, 2017, 2018, 2019

Brand

CSF Radiators

Make

AMG C63, AMG GLE63, AMG GT/GTS/GTR/GTC, Mercedes-Benz

Model Year

2015, 2016, 2017, 2018, 2019, 2020, 2021

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Main Menu Category Menu CONTACT DETAILS
What are you looking for in Vaglogic?
× How can I help you?