FTP Motorsport BMW G20 B58 3.0T charge pipe ( A90 supra) B58 Gen2 – FTPSG71444

SKU: FTPSG71444
In Stock

د.إ1,200.00

Upon placing the order, we will get in touch with you to confirm the availability information.

For Instant Enquiry and More Details, Please Click Here

In Stock
Add to Wishlist
Add to Wishlist

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist
Low Prices

Price match guarantee

Guaranteed Fitment.

Always the correct part

In-House Experts.

We know our products

Wide Product Selection

Endless Possibilities

Category:

Description

Our charge pipe kit replaces the weak and inefficient factory plastic charge pipe, which can become brittle and fail under increased boost pressure.
Made of high-quality aluminum
Direct bolt-on replacement for easy installation
increased boost pressure and improve throttle response

 Features

*Increased Flow

*Direct OEM Replacement

*Caliber increase

*3-Ply Silicon Couplers

* bung for water injection

*never blow up again

For maximum effect, The FTP Charge Pipe both increases flow and improves the reliability of your

B58 engine BMW.

The aluminum pipe replaces the brittle factory plastic pipe which can fail under increased boost pressure.

The increased piping size helps to reduce turbulence and maximize flow into the engine.

 

OEM Part 13718651066

FTP parts number sg71444 wasPart was found on the following vehicles:

3′ G20   M340i. (01/2018 —  2021)
7′ G11 LCI   740i  (01/2018 — 2021)
7′ G12 LCI   740Li (01/2018 — 2021)
X5 G05   M40i (10/2017 — 2021)

X6 G06 M40i ( 2018 ~ 2021)

X7 G07   M40i (11/2017 — 2021 )
Z4 G29   (10/2017 — 2021 )

Toyota Toyota GR Supra A90 ( 2019- now )

Additional information

Brand

FTP Motorsport

Make

3 Series, 7 Series, BMW, Supra, Toyota, X5, X6, X7, Z4

Model Year

2017, 2018, 2019, 2020, 2021, 2022, 2023

Reviews

There are no reviews yet.

Be the first to review “FTP Motorsport BMW G20 B58 3.0T charge pipe ( A90 supra) B58 Gen2 – FTPSG71444”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsFTP Motorsport BMW G20 B58 3.0T charge pipe ( A90 supra) B58 Gen2 - FTPSG71444 removeCTS TURBO F80/82/83 M3/M4 S55 CHARGEPIPE SET -CTS-IT-288 removeTHE TURBO SYSTEM TTE700 EVO EA855 2.5 TFSI UPGRADE TURBOCHARGER -SW10032.1 removeCTS TURBO B9 A4/A5 SILICONE TURBO INLET HOSE -CTS-SIL-083 removeCTS TURBO B8/B8.5 AUDI A4/A5/ALLROAD/Q5 2.0T CHARGE PIPE -CTS-IT-267 removeCTS TURBO F20/F30 BMW M235I/335I/435I N55 CHARGE PIPE SET XDRIVE MODELS -CTS-IT-805 remove
NameFTP Motorsport BMW G20 B58 3.0T charge pipe ( A90 supra) B58 Gen2 - FTPSG71444 removeCTS TURBO F80/82/83 M3/M4 S55 CHARGEPIPE SET -CTS-IT-288 removeTHE TURBO SYSTEM TTE700 EVO EA855 2.5 TFSI UPGRADE TURBOCHARGER -SW10032.1 removeCTS TURBO B9 A4/A5 SILICONE TURBO INLET HOSE -CTS-SIL-083 removeCTS TURBO B8/B8.5 AUDI A4/A5/ALLROAD/Q5 2.0T CHARGE PIPE -CTS-IT-267 removeCTS TURBO F20/F30 BMW M235I/335I/435I N55 CHARGE PIPE SET XDRIVE MODELS -CTS-IT-805 remove
Image
SKUFTPSG71444CTS-IT-288SW10032.1CTS-SIL-083CTS-IT-267CTS-IT-805
Rating
Priceد.إ1,200.00د.إ1,590.00د.إ18,600.00د.إ425.00د.إ740.00د.إ1,180.00
Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityIn StockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

Add to basket

DescriptionUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click HereUpon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here
ContentOur charge pipe kit replaces the weak and inefficient factory plastic charge pipe, which can become brittle and fail under increased boost pressure. Made of high-quality aluminum Direct bolt-on replacement for easy installation increased boost pressure and improve throttle response

 Features

*Increased Flow *Direct OEM Replacement *Caliber increase *3-Ply Silicon Couplers * bung for water injection *never blow up again For maximum effect, The FTP Charge Pipe both increases flow and improves the reliability of your B58 engine BMW. The aluminum pipe replaces the brittle factory plastic pipe which can fail under increased boost pressure. The increased piping size helps to reduce turbulence and maximize flow into the engine.   OEM Part 13718651066 FTP parts number sg71444 wasPart was found on the following vehicles: 3' G20   M340i. (01/2018 —  2021) 7' G11 LCI   740i  (01/2018 — 2021) 7' G12 LCI   740Li (01/2018 — 2021) X5 G05   M40i (10/2017 — 2021) X6 G06 M40i ( 2018 ~ 2021) X7 G07   M40i (11/2017 — 2021 ) Z4 G29   (10/2017 — 2021 ) Toyota Toyota GR Supra A90 ( 2019- now )

Introducing the CTS TURBO Charge Pipe Set for M3/M4 Models, specifically, these will fit F80 chassis(F80,82,83). The plastic OEM charge pipes are prone to failure at STOCK boost levels. The CTS Charge Pipe Kit offers more power, OE fitment and peace of mind at any boost level. You’ll notice an increase in throttle response and a decrease in turbo lag. Product Details Billet CNC Flanges T6061 Mandrel Bent Aluminium Pipe Robust Black Powdercoat Finish 4 ply silicon connector Stainless Steel Clamps Laser etched CTS Turbo Logo Water Methanol Bung (with plugs) Necessary Installation hardware Fitment: BMW 2015+ M3 & M4 with the S55 engine (F80, F82 & F83)
Make Model Year Generation
BMW M2C 2018 - 2021 F87
BMW M3 2014 - 2020 F80
BMW M4 2015 - 2020 F82

TTE700 EVO UPGRADE TURBOCHARGER FOR RS3 8V.2 & 8Y / TTRS 8S DAZA, DNWA, DNWC

A TTE700 Is an original RS3 8V.2/TTRS 8S turbocharger that we the THETURBOENGINEERS Rework to make amazing performance yet still plug & play fitting with an upgrade inlet. To make a TTE700 the compressor wheel is exchanged for a TTE milled aluminum wheel with state-of-the-art geometry, 7+7 blade, and of a much larger size, so producing extra power. Equally, we change the original exhaust turbine for a far larger but very lightweight 9 blade TTE designed the turbine for lower exhaust gas backpressure giving greater performance. We also fitted a TTE motorsport upgrade bearing system for durability. Boost response as always is focused on when we were designing this unit and it does not disappoint.

If ordering new, we use the latest generation of BorgWarner original turbochargers with the latest spec Audi thermal heat isolation shielding on the exhaust manifold & turbine housing to lower engine bay temperatures and ensure the best performance and safety.

Please note if you send an older generation turbo, without the original AUDI thermal shielding for the "upgrade" process, we will rework your turbo and return without the shielding, unless you buy the extra thermal Isolation process.  Depending on stock availability we may substitute TTE thermal shielding and give AUDI original thermal shielding instead. 

Equilibrium

Precisely balancing our turbochargers is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Good balance improves acoustics also. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts machine, then components are assembled and then the CHRA are dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. Each turbocharger is supplied with a serial numbered balance test result document.

Features :  

  • TTE Billet Milled 7+7 Blade, 63mm Inlet compressor
  • TTE 9 Blade High-flow Low-mass turbine
  • TTE Upgrade bearing pack
  • Genuine BorgWarner Turbocharger as the base part
  • Genuine BorgWarner actuator
  • Thermally shielded exhaust manifold and housing
  • CNC Optimized Compressor Cover Machining Clearances
  • Plug and Play Installation
  • 600+ depending on fuel (link here for required upgrade injectors)
  • Single parts finely balanced then components assembled and core high-speed VSR balanced
  • Supplied with a balance test result document
  • Software recalibration is required
  • Proven TheTurboEngineers quality
  • Made in Germany

From time to time when buying new, we might supply the upgrade TTE thermal isolation free of charge if AUDI OEM heat shielded units are not avalible.

 
Make Model Submodel Engine
Audi 8S TTRS Quattro 2.5T
Audi RS3 8V (2018+) 2.5T
 
Turning up the boost in your car increases wear on your stock rubber turbo inlet hose. Eliminate cracking, stretching and deformation with this CTS Turbo B9 A4/A5 Silicone Turbo Inlet Hose. Increased rigidity and higher flow mean less restriction and more power. Mounting clamps are included. Product Features: – Increased Flow – Improved Sound – Reduce Turbo Spool Time – No Modification Required
Make Model Year Generation
AUDI A4 2017 - 2021 B9
AUDI A5 2016 - 2021 B9
CTS Turbo is proud to introduce high-flow charge pipe upgrade for 2.0TFSI Audi A4/A5/Allroad and Q5. This aluminum pipe will replace a restrictive plastic charged air pressure pipe located on the left side on the vehicle. It removes the factory “air charge pulsation damper” for maximum flow and sound! Our charge pipe allows for easy installation of water-methanol injection via integrated 1/8″ NPT bung. Features:
  • 2.5″ mandrel bent aluminum construction
  • CNC machined MAP sensor bung
  • 1/8″ NPT bung for water/meth injection nozzle
  • Black powdercoat for long lasting finish
  • Direct replacement for OE pressure pipe: 8K0145673AJ
  • Compatible with factory or aftermarket intercooler hoses
Fitment
  • 2009-2016 Audi B8/B8.5 All-Road 2.0T
  • 2009-2016 Audi B8/B8.5 A4 FWD 1.8T – ROW Market
  • 2009-2016 Audi B8/B8.5 A4 2.0T
  • 2009-2016 Audi B8/B8.5 A5 2.0T
  • 2008-2017 Audi 8R Q5 2.0T
Not for late 2016+ ROW B8.5 Audi A4/A5 with Gen3 engines.
Make Model Year Generation
AUDI A4 2009 - 2016 B8/8.5
AUDI A5 2009 - 2016 B8/8.5
Introducing the CTS TURBO F30 N55 Charge Pipe Set for XDRIVE Models (M235i/335i/435i). The OEM charge pipes are prone to failure at STOCK boost levels. The CTS Charge Pipe Kit offers peace of mind, more power, and OE fitment. Precision CNC machined MAP sensor flange, mandrel-bent aluminum piping. You’ll notice an increase in throttle response and a decrease in turbo lag. Product Details:
  • Retains factory style o-ring throttle body lock flange
  • Water/meth bung allows for easy install of most water/meth kits
  • T6061 Mandrel Bent Aluminium Pipe
  • Robust Black Powdercoated Finish
  • 4 ply silicon connector
  • Stainless Steel Clamps
  • Laser etched CTS Turbo Logo
Fitment:
  • 2012 – 2016 F30/F31/F36 BMW 335i xDrive N55
  • 2012 – 2016 F32 BMW 435i xDrive N55
  • 2014 – 2016 F22/F23 BMW M235i xDrive N55
Make Model Year Generation
BMW 335i xDrive 2012 - 2015 F30
BMW 435i xDrive 2014 - 2016 F32
BMW M235i xDrive 2014 - 2016 F22
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Brand

FTP Motorsport

Make

3 Series, 7 Series, BMW, Supra, Toyota, X5, X6, X7, Z4

Model Year

2017, 2018, 2019, 2020, 2021, 2022, 2023

Brand

CTS Turbo

Make

BMW, M2, M3, M4

Model Year

2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021

Brand

The Turbo Engineer

Make

Audi, RS3, TTRS

Model Year

2015, 2016, 2017, 2018, 2019, 2020

Brand

CTS Turbo

Make

A4, A5, Audi

Model Year

2016, 2017, 2018, 2019, 2020, 2021

Brand

CTS Turbo

Make

A4, A5, Audi

Model Year

2011, 2012, 2013, 2014, 2015, 2016

Brand

CTS Turbo

Make

3 Series, 4 Series, BMW, M235i

Model Year

2012, 2013, 2014, 2015, 2016