Forge Motorsport Turbo Inlet Adaptor for the VW Golf Mk8 GTI, Audi A1, A3, TT & Cupra – FMTIA6
د.إ900.00
Upon placing the order, we will get in touch with you to confirm the availability information.
For Instant Enquiry and More Details, Please Click Here
In Stock
Did you like this product? Add to favorites now and follow the product.
Add to Wishlist
Add to Wishlist
Description
Suitable for both left and right hand drive – This replaces OEM part number 5WA.129.635
With the success of turbo inlet adaptors for a number of platforms and engine configurations we took the opportunity to further our product range for the VW MK8 GTI. We looked to see if we could improve on the air flow to the turbo charger. On investigation we could see that the OEM turbo adaptor was restrictive and was an area in need for improvement. Therefore, our highly skilled development team got to work designing a solution to maximize the capacity by utilizing our CAD system and physical prototypes.
The OEM plastic turbo inlet includes a ribbed hose that also disturbs the air flow within the inlet tract, this OEM part has a detrimental effect to the engines performance especially when tuned. For the best possible gains, we have included a smooth silicone inlet hose that is included in the kit and meets the forge turbo elbow seamlessly, this product not only enhances the look of your vehicles engine bay the TIA6 inlet elbow and hose increase the volume and air flow significantly, this ensures the transition is as smooth as possible from the inlet tract to the turbo.
Suitable for both left and right hand drive vehicles the turbo elbow is made from cast aluminium and machined to the perfect tolerance to enable a superb fit, this is a product that can be installed in approximately 30 minutes with only a few tools and can easily be accomplished by even the most novice enthusiast.
During independent testing on a stock vehicle we found the throttle response to be increased with a gain of 12NM torque between 2000RPM and 2400RPM while holding noticeable smoother torque figure to just over 3300RPM along with a slight increase of BHP at 5300RPM, These figures can be expected to increase the more the vehicle is tuned and will typically produce a gain of around 7 BHP on stage 1 tuned vehicles this is because at the entry point to the inlet elbow the surface area in increased by 30%.
Combined with our product FMMD6 the turbo charger works more freely and should certainly be considered as one of the first two modifications to carry out on the new 2.0 petrol turbo (TSI) (EA888 GEN4 engine) with the engine code DNP and replaces the OEM part number 5WA.129.635
- The Forge silicone hose in this kit has been designed to include an expensive inner liner of modified silicone known as Fluorosilicone.
- This means the hose is suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist.
- The construction of the hose has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically
- Increased capacity
- No engine check lights (EML)
- Increased air flow
- Lifetime warranty*
Compatible Vehicles :
Additional information
| Brand | Forge Motorsport |
|---|---|
| Make | A1, A3, Audi, Golf GTI, TT, Volkswagen |
| Model Year | 2019, 2020, 2021, 2022, 2023 |
Be the first to review “Forge Motorsport Turbo Inlet Adaptor for the VW Golf Mk8 GTI, Audi A1, A3, TT & Cupra – FMTIA6”
Quick Comparison
| Settings | Forge Motorsport Turbo Inlet Adaptor for the VW Golf Mk8 GTI, Audi A1, A3, TT & Cupra - FMTIA6 remove | TTE IS38RACE IHI UPGRADE TURBOCHARGER -TTE10354 remove | CTS TURBO BMW F-SERIES M140I/M240I/340I/440I B58 GEN1 TURBO INLET PIPE -CTS-HW-506 remove | CTS TURBO MK6 GOLF R TURBO OUTLET PIPE (TOP) -CTS-IT-110 remove | CTS TURBO MK8 VW GTI TURBO MUFFLER DELETE -CTS-HW-510 remove | CTS TURBO B9 AUDI SQ5 3.0T CHARGE PIPE -CTS-IT-294 remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | Forge Motorsport Turbo Inlet Adaptor for the VW Golf Mk8 GTI, Audi A1, A3, TT & Cupra - FMTIA6 remove | TTE IS38RACE IHI UPGRADE TURBOCHARGER -TTE10354 remove | CTS TURBO BMW F-SERIES M140I/M240I/340I/440I B58 GEN1 TURBO INLET PIPE -CTS-HW-506 remove | CTS TURBO MK6 GOLF R TURBO OUTLET PIPE (TOP) -CTS-IT-110 remove | CTS TURBO MK8 VW GTI TURBO MUFFLER DELETE -CTS-HW-510 remove | CTS TURBO B9 AUDI SQ5 3.0T CHARGE PIPE -CTS-IT-294 remove | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Image |  |  |  |  |  |  | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| SKU | FMTIA6 | TTE10354 | CTS-HW-506 | CTS-IT-110 | CTS-HW-510 | CTS-IT-294 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Rating | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Price | د.إ900.00 | د.إ7,900.00 | د.إ650.00 | د.إ1,200.00 | د.إ450.00 | د.إ1,260.00 | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Stock | In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| In Stock
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Availability | In Stock | In Stock | In Stock | In Stock | In Stock | In Stock | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Add to cart | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | Upon placing the order, we will get in touch with you to confirm the availability information. For Instant Enquiry and More Details, Please Click Here | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Content | Suitable for both left and right hand drive - This replaces OEM part number 5WA.129.635
With the success of turbo inlet adaptors for a number of platforms and engine configurations we took the opportunity to further our product range for the VW MK8 GTI. We looked to see if we could improve on the air flow to the turbo charger. On investigation we could see that the OEM turbo adaptor was restrictive and was an area in need for improvement. Therefore, our highly skilled development team got to work designing a solution to maximize the capacity by utilizing our CAD system and physical prototypes.
Combined with our product FMMD6 the turbo charger works more freely and should certainly be considered as one of the first two modifications to carry out on the new 2.0 petrol turbo (TSI) (EA888 GEN4 engine) with the engine code DNP and replaces the OEM part number 5WA.129.635
Compatible Vehicles : | TTE IS38Race IHI Turbocharger
Many of our customers have been asking for a motorsport IS38 turbocharger, Well here it is!
TTE IS38Race Turbocharger is based on the Original Genuine IHI IS38 turbocharger for the EA888.3 2.0TSI VAG Engine, not a cheap aftermarket clone IS38 turbo that are available from others and not disclosed.
A TTE IS38Race has a TTE upgrade performance bearing pack and motorsport balanced TTE core using the IHI Bearing housing and IHI IS38 turbine and Genuine IHI IS38 compressor wheel giving a reliable performance at higher boost levels as used on Stage 1 & 2 software calibrations from all software providers. We also include our TTE CNC silencer delete, removing the original baffle internals and fitting a new billet straight through section to improve the flow and enhance the sound.
This is a direct swap from a standard IS38 so no remap or special calibration required vs standard is38 software.
Precisely balancing the IS38Race turbocharger is a key critical factor to become a TTE upgrade unit as longevity and performance are paramount. Subsequent great care is taken with all TTE turbochargers to achieving our balance standards. Firstly parts are balanced at slow speeds up to 2800RPM in multiple planes using our single parts balance machine, then components are assembled and then the CHRA is dynamically balanced, but this time depending on the application at up to 250,000 RPM in multiple planes using our in house VSR machine to acquire the ultimate equilibrium, to a standard far higher than OEM. A balance report document is supplied with your TTE IS38Race for your reassurance.
Product Highlights:
 | CTS Turbo is proud to release our F-series BMW B58 GEN1 turbo inlet pipe for M140i/M240i/340i/440i.
We designed our inlet to work with our intake system and it is compatible with the OEM intake system. Our inlet will provide more sound and flow compared to stock. This will improve throttle response, more power and reliability.
Simple installation takes 10 minutes and can be done using basic hand tools.
Product features:
| The CTS Turbo Golf R Turbo Outlet Pipe (TOP) is designed to replace the narrow ‘pancake’ pipe that comes as factory equipment on your vehicle.
Our Turbo Outlet Pipe features 2.25″ diameter aluminum tube for optimized flow. The CNC machined billet mating flange makes connecting this TOP to your FMIC literally a snap. The billet anodized turbo to TOP connector, 2.25″ coupler and premium clamps top this package off. If you’re looking for a simple bolt-on modification that will optimize flow and increase power, then this part is for you.
Product Details:
· 2.25” Mandrel bent tube
· CNC machined turbo discharge flange
· CNC machined FMIC mating flange
· 4-Ply silicon connectors with stainless steel clamps
· Black powder coated finish
· Laser cut mounting bracket
· Designed for fitment on cars with factory K04 turbo
This part fits:
· Any VAG vehicle that is equipped with K04 turbo from the factory (Audi S3 (8P), Audi TT-S (MK2), VW Golf R (MK6), VW GTI ED30 (MK5), VW GTI ED35 (MK6), VW Scirocco R (MK3), Seat Cupra R, etc)
| CTS Turbo is proud to release our high flow Turbo Muffler delete for the MK8 GTI with the new 2.0T EA888.4 engine.. This is another original product brought to you by our engineers and in-house fabrication team.
The CTS Turbo Muffler delete is a one-piece design, made using precision CAD tools and is CNC machining in house.
Our Turbo Muffler delete replaces the restrictive, power robbing OEM Turbo Muffler, which is designed to reduce turbocharger harmonic noise.
Our kit installs in 30 minutes with standard hand tools and fits perfectly.
For those of you that want optimal power and boost response, this TMD is your answer.
Features:
| CTS Turbo is excited to announce the release of the B9 Audi SQ5 3.0T TFSI charge pipe upgrade kit. Factory pipe that connects the intercooler to the throttle body is made of brittle plastic. It’s wise to replace it with an all-aluminum high flowing CTS Turbo charge pipe.
Our 2.5″ charge pipe kit will increase flow and improve the reliability of your B9 Audi SQ5. You’ll notice an increase in throttle response and a decrease in turbo lag.
Two water/methanol bung provide an easy way to install injection nozzle.
Product Details
FITMENT:
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Weight | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||||||||||||||||||||||||||||||||||||||||
| Additional information |
|
|
|
|
|
|
Related products
THE TURBO ENGINEER TE700 2.5TFSI CZGB / CEPA / CEPB UPGRADE TURBOCHARGER -TTE10033.1
د.إ18,600.00 In Stock
Copyright 2023 © VagLogic Designed by Sunwin Solutions SG
Reviews
There are no reviews yet.